#
✕ nick:kettenis
#asahi-dev · 2021-12-10 08:22
kettenisthe delay between command and status is defenitely necessary
#asahi-dev · 2021-12-10 08:20
kettenisso my driver has some weird delays in it; it would be nice to get a better understanding of those
#asahi-dev · 2021-12-10 08:17
kettenisthe usb hid group never properly standardized multi-touch
#asahi-dev · 2021-12-10 08:14
kettenisso I just copied code ;)
#asahi-dev · 2021-12-10 08:14
kettenisyes, same issue on the OpenBSD side
#asahi-dev · 2021-12-10 08:13
kettenisit matches the linux drivers/input/bcm5974.c behaviour
#asahi-dev · 2021-12-10 08:11
kettenisindeed
#asahi-dev · 2021-12-10 08:09
kettenisthe previous revision uses HID mode which just emulates a mouse
#asahi-dev · 2021-12-10 08:09
kettenisthis version uses "raw" mode to support the touchpad
#asahi-dev · 2021-12-10 08:08
kettenishopefully that gives you some hints on how I think the HID stuff works
#asahi-dev · 2021-12-10 08:08
kettenisjannau: that is the current version of my OpenBSD driver
#asahi-dev · 2021-12-10 08:08
kettenisI'll give that a go with OpenBSD
#asahi-dev · 2021-12-10 08:07
kettenishttps://github.com/openbsd/src/blob/master/sys/arch/arm64/dev/aplhidev.c
#asahi-dev · 2021-12-10 08:05
kettenisso the 24/120MHz difference suggests that we can actually use a 10MHz spi-max-frequency on t8103-j293
#asahi-dev · 2021-12-10 07:56
kettenisright
#asahi-dev · 2021-12-10 07:55
kettenisI think we should not add cs-gpios if we want to use hardware cs control
#asahi-dev · 2021-12-10 07:46
kettenisare you tracing macos?
#asahi-dev · 2021-12-10 07:32
kettenisthe adt doesn't actually provide the equivalent of spi-max-frequency for the spi devices isn't it?
#asahi-dev · 2021-12-10 07:28
kettenisalso, how did you figure out which gpio pins are used?
#asahi-dev · 2021-12-10 07:27
kettenisI'll need to fugure out how to use it ;)
#asahi-dev · 2021-12-10 07:23
kettenisyour gpiola.py stuff can actually measure the clock frequency?
#asahi-dev · 2021-12-10 07:20
kettenisthat is what I have
#asahi-dev · 2021-12-10 07:20
kettenisspi-max-frequency = <2000000>;
#asahi-dev · 2021-12-10 07:20
kettenisspi-max-frequency is the max frequency the spi device can run at if my understanding is correct
#asahi-dev · 2021-12-10 07:19
kettenisof course I copied the spi-max-frequency property from corellium
#asahi-dev · 2021-12-10 07:18
ketteniswell, if the input frequency isn't 24MHz but 200MHz the actual SPI clock frequency won't be what I think it is
#asahi-dev · 2021-12-10 07:11
kettenis User: /device-tree/arm-io/spi1.clk[0]
#asahi-dev · 2021-12-10 07:11
kettenis#121: 200000000 2 0xa0/0x23b0400f8: regval: 0x85100000
#asahi-dev · 2021-12-10 07:09
kettenis User: /device-tree/arm-io/spi3.clk[0]
#asahi-dev · 2021-12-10 07:08
kettenis#123: 120000000 2 0xa0/0x23b040100: regval: 0x85100000
#asahi-dev · 2021-12-10 07:05
kettenishmm, dump_pmgr.py suggests spi3 uses a 120MHz clock on j293
#asahi-dev · 2021-12-10 06:56
kettenisso is it correct that the M1 models use the 24MHz refclk and the M1 Pro/Max models a 200MHz clock?
#asahi-dev · 2021-12-10 06:51
kettenisjannau: almost certainly the case
#asahi-dev · 2021-12-10 06:51
kettenisbtw, how did you determine the input clock for the spi controller?
#asahi-dev · 2021-12-10 06:33
kettenisthere are some packets that get sent early one that I haven't been able to give a meaning to
#asahi-dev · 2021-12-09 22:46
kettenismwahaha
#asahi-dev · 2021-12-09 22:45
kettenisbut having three proper mouse buttons is nice
#asahi-dev · 2021-12-09 22:45
kettenishad to get used to the one on my x395
#asahi-dev · 2021-12-09 22:41
kettenisso quite good
#asahi-dev · 2021-12-09 22:41
kettenisit feels like an apple trackpad
#asahi-dev · 2021-12-09 22:30
ketteniswonder if there is a register that indicates the actual fifo size
#asahi-dev · 2021-12-09 22:29
kettenisAPPLE_SPI_FIFO_DEPTH instead of 16 of course
#asahi-dev · 2021-12-09 22:28
kettenisor at least it should have the min_t that jannau suggests
#asahi-dev · 2021-12-09 22:28
kettenisI think so
#asahi-dev · 2021-12-09 22:27
kettenisah, yes, the fifo size is only 16
#asahi-dev · 2021-12-09 22:25
kettenissorry, cs_setup
#asahi-dev · 2021-12-09 22:20
kettenisthat seems to be a relatively recent addition though
#asahi-dev · 2021-12-09 22:18
kettenisprobably should set the cs_delay member of struct spi_device appropriately
#asahi-dev · 2021-12-09 18:05
kettenisotherwise the corellium spi driver wouldn't work
#asahi-dev · 2021-12-09 18:04
kettenisthe clk, mosi and miso pins should already be set correctly

plus ›