#asahi-dev · 2024-12-01 02:34
tpw_rulesbeen low on bandwidth myself recently, hope it's fun#asahi-dev · 2024-12-01 02:33
tpw_rulesyuka: well i'd be excited to see it run nixos!#asahi-dev · 2024-12-01 02:02
yukatpw_rules: can neither confirm nor deny :p#asahi-dev · 2024-12-01 01:56
tpw_rulesyuka: did you get an m4 mini?#asahi-dev · 2024-12-01 01:50
tpw_rulesjannau: hi, it looks like the "enable bootmenu by default" patch might only be in fedora's package now? is it still in the u-boot installed by the asahi installer?#asahi-dev · 2024-11-30 14:43
yukabut I won't touch the mac mini today#asahi-dev · 2024-11-30 14:43
yukathis - as I recall it - should "just work" up to the point of presenting the usb serials#asahi-dev · 2024-11-30 14:43
yukahttps://github.com/yu-re-ka/m1n1/commits/t8132/#asahi-dev · 2024-11-30 14:43
yukaor rather#asahi-dev · 2024-11-30 14:41
yukahttps://github.com/yu-re-ka/m1n1/commit/3ac6cbae12756f0e952c71e7588777841296e3a8#asahi-dev · 2024-11-30 14:40
yukaso the debug cycle is still very annoying#asahi-dev · 2024-11-30 14:40
yukaI couldn't get chainloading another m1n1 to work yet#asahi-dev · 2024-11-30 14:39
Marynot too sure what to tackle anyway, maybe it would make more sense if I could help on m1 stuffs#asahi-dev · 2024-11-30 14:38
Marynice, well I guess the custom usb pd breakout board I just receive today will be useless then ^^#asahi-dev · 2024-11-30 14:36
jannauI think Daniel already skipped the i2c init for m3 pro/max devs with spmi usb-c prot controller and usb2 just works#asahi-dev · 2024-11-30 14:33
yukaMary: with a few changes, like adding the early return to cpu_init, adding an appropriate code path for t8132 in mcc.c, and commenting out the gxf_init, the usb driver did "just work"#asahi-dev · 2024-11-30 13:02
chadmededid and audio* #asahi-dev · 2024-11-30 13:02
chadmedlast bit of work was stabilising edid audio #asahi-dev · 2024-11-30 13:02
chadmeddoesnt look like it#asahi-dev · 2024-11-30 12:48
jannaudid I add the face CRC support to bits/200-dcp?#asahi-dev · 2024-11-30 12:48
jannauI don't remember exactly. it was a basic overlay test and I was mostly concerned about the overlay parameters. iirc it well of a reasonable display area. and our off active area broke that obviously#asahi-dev · 2024-11-30 12:45
chadmedthe failures i got are all red herrings (tests that should have been skips or tests that failed because igt tried to swap a 0x0 rect which we can never support)#asahi-dev · 2024-11-30 12:45
chadmed[16:21] <chadmed> jannau: do you remember which igt test failures you were concerned about? <- also sorry for the bump but im not gonna have time to look at this again for a while#asahi-dev · 2024-11-30 12:43
jannauthat one shipped with macos 13.5#asahi-dev · 2024-11-30 12:43
chadmedso we know which devices get finalised first in the product cycle :p#asahi-dev · 2024-11-30 12:42
chadmedoh wow okay#asahi-dev · 2024-11-30 12:42
jannauchadmed: not expect, j504 (14-inch M3 mbp) still has the i2c ones#asahi-dev · 2024-11-30 12:41
jannauI was thinking of the adt from the device via `python3 -m m1n1.adt -r adt.bin` or the templates from the IPSW Firmware/all_flash/DeviceTree.j613ap.im4p#asahi-dev · 2024-11-30 12:41
chadmeddo we expect some m3 devices to still have the old i2c chip? #asahi-dev · 2024-11-30 12:39
jannausearch for hpm or usbc,sn201202x,spmi which answers the question already#asahi-dev · 2024-11-30 12:39
chadmedyoull get more readable and useful information since m1n1 handily offsets addresses etc for you#asahi-dev · 2024-11-30 12:39
chadmeddump it from m1n1 #asahi-dev · 2024-11-30 12:22
MikeWyxtti have the adt dumped now from ioreg. not as suggestive as i would have liked, what im i searching for here specifically?#asahi-dev · 2024-11-30 12:06
MikeWyxttdumping it, one moment#asahi-dev · 2024-11-30 12:01
jannauthe ADT, apple's devicetree#asahi-dev · 2024-11-30 12:01
MikeWyxttjannau: How do you find that? i dont see that in system profiler or from dmesg#asahi-dev · 2024-11-30 11:53
MikeWyxttlet me check#asahi-dev · 2024-11-30 11:51
jannauhas that still i2c hpm (usb-c PD/port controller (ACE)) or spmi ones?#asahi-dev · 2024-11-30 11:50
MikeWyxttI see. I have a 13" M3 MBA #asahi-dev · 2024-11-30 11:48
jannauthat tree boots on the m3 14" macbook pro. There is some issue with the display power domains. the display will stay on with "pd_ignore_unused" on the kernel command line and removing the power-domain from chosen.framebuffer in the device tree#asahi-dev · 2024-11-30 11:45
MikeWyxttokay will do#asahi-dev · 2024-11-30 11:44
jannauMikeWyxtt: use https://github.com/jannau/linux/tree/t8122-j504 as m3 starting point#asahi-dev · 2024-11-30 11:43
jannauMikeWyxtt: I'd recommend 14.x for m3 for now. It's easier for now since the SSD has a incompatible firmware change in 15.1. as long as you don't start working on firmware driven HW support (dcp, gpu, isp) 14.6 is fine#asahi-dev · 2024-11-30 11:14
mpsthough it works fine#asahi-dev · 2024-11-30 11:14
mpsjust for info, yesterday when building mesa-asahi 20241128 I've got this warning https://tpaste.us/oxvg#asahi-dev · 2024-11-30 11:10
MikeWyxttok i think that makes sense. thx#asahi-dev · 2024-11-30 11:09
chaos_princessasahi-wip #asahi-dev · 2024-11-30 11:09
j`eyMikeWyxtt: there's tags made#asahi-dev · 2024-11-30 11:08
MikeWyxtttethered boot setup is a go. last question, is there a particular branch of the asahi kernel fork i should clone and build? or just clone main and go?#asahi-dev · 2024-11-30 10:52
MikeWyxttyes. the work thats been done so far in spite of that fact by people with no docs or anything to reference is fascinating