#
#asahi-dev · 2025-03-14 16:07
fl0_idhehe
#asahi-dev · 2025-03-14 16:05
mischa85_so the asahi logo is laughing at me
#asahi-dev · 2025-03-14 16:05
mischa85_well i have a barebone m1n1 working. at least there's framebuffer lol
#asahi-dev · 2025-03-14 16:03
svengood luck :) would be nice to get at least m1n1 + hv to work on M4
#asahi-dev · 2025-03-14 16:01
mischa85_yeah i'll just block all pmgr reg access. these are just the early bringup struggles
#asahi-dev · 2025-03-14 15:58
svenM4 also has this weird SPTM thing which may or may not come with changes to GXF/SPRR and may or may not work with our current hv code
#asahi-dev · 2025-03-14 15:58
sveniirc the hv did something with pmgr as well, you may to patch that out and hope everything works
#asahi-dev · 2025-03-14 15:55
mischa85_but as you know i cannot turn anything on via pmgr
#asahi-dev · 2025-03-14 15:55
mischa85_well the slow serial is something that might be fixable
#asahi-dev · 2025-03-14 15:55
svenand i really wouldn't want to upload a full xnu kernel over that slow serial either :/
#asahi-dev · 2025-03-14 15:55
svene.g. if they changed anything with gxf/sprr which they may have done on M4 to support that exclave stuff (though that may be ios only? dunno)
#asahi-dev · 2025-03-14 15:53
svenit's much more complex and probably needs more random stuff to be up and running than usb 2
#asahi-dev · 2025-03-14 15:53
svenso... realistically you won't get the HV working before you get USB working :/
#asahi-dev · 2025-03-14 15:52
LarstiQmischa85_: I'm cheering for you!
#asahi-dev · 2025-03-14 15:46
mazthanks!
#asahi-dev · 2025-03-14 15:46
mischa85_but i'll send you the patch if i succeed
#asahi-dev · 2025-03-14 15:45
mischa85_i'm hacking cs-sw as we speak, but i'm running it on a pico 2 though
#asahi-dev · 2025-03-14 15:41
mazmischa85_: if you get there, I'll happily take patches.
#asahi-dev · 2025-03-14 15:30
fl0_ideven with a usb on the target it was a bit finicky for me. Most consistent was starting the target by plugging in the usb, but that's probably not your problem :)
#asahi-dev · 2025-03-14 14:56
mischa85_okay challenge accepted
#asahi-dev · 2025-03-14 14:56
mischa85_hmmm. i was able to archieve some bonkers baudrates on the uart port of a beaglebone the other day
#asahi-dev · 2025-03-14 14:44
mazalternatively, you can spend some quality time hacking the CS firmware to support higher baud dates. shouldn't be too hard...
#asahi-dev · 2025-03-14 14:41
alyssayeah the original m1 bringup was macvdmtool iirc
#asahi-dev · 2025-03-14 14:40
mischa85_because then the baudrate will be higher
#asahi-dev · 2025-03-14 14:40
mischa85_but you're right, if i really have to do hypervisor stuff before having usb i maybe gotta do so via another m1 device again
#asahi-dev · 2025-03-14 14:38
mischa85_just timeouts on me: m1n1.proxy.UartTimeout: Expected 1 bytes, got 0 bytes
#asahi-dev · 2025-03-14 14:37
mischa85_but now on my pc only terminal works but not the tooling
#asahi-dev · 2025-03-14 14:37
mischa85_yes i had it working on my laptop
#asahi-dev · 2025-03-14 14:37
mazit works, just slowly.
#asahi-dev · 2025-03-14 14:36
mischa85_lol yes
#asahi-dev · 2025-03-14 14:36
mazah, you're then stuck to 115200 then.
#asahi-dev · 2025-03-14 14:36
mischa85_yes but the target doesn't do usb yet
#asahi-dev · 2025-03-14 14:36
mazthat's a direct USB2 connection to the target.
#asahi-dev · 2025-03-14 14:36
mazif you want to interact with the proxy, you need to use the micro-usb connector on the CS itself.
#asahi-dev · 2025-03-14 14:36
mischa85_which is the only thing i have
#asahi-dev · 2025-03-14 14:35
mazthat's only for the serial console.
#asahi-dev · 2025-03-14 14:35
mischa85_i'm using the USB port on the rpi pico that's soldered onto it
#asahi-dev · 2025-03-14 14:35
mazthe only significant baud-rate is for the serial console, and that's firmly set to 115200 in the CS firmware.
#asahi-dev · 2025-03-14 14:34
mazagain, if you're using the USB passthrough that the CS is giving you, there is no baud-rate to speak of.
#asahi-dev · 2025-03-14 14:34
mischa85_that's the thing. i'm using the cs
#asahi-dev · 2025-03-14 14:33
mazif you're using a USB connection, this isn't a real serial connection, so the baud rate is irrelevant.
#asahi-dev · 2025-03-14 14:30
mischa85_i just really cannot get anywhere with this. fuck./
#asahi-dev · 2025-03-14 14:29
mischa85_it also doesn't do any baud rate switch at all. really seems like a pyserial issue of some sorts?
#asahi-dev · 2025-03-14 14:24
mischa85_i was on a mac earlier, now on linux. baud rate is set. what can it be?
#asahi-dev · 2025-03-14 14:23
mischa85_meh. now on a different machine the python proxy doesn't want to connect. picocom works perfectly fine
#asahi-dev · 2025-03-13 22:49
mischa85egh. another exception sync waterfall while trying to load the xnu kernel under hv: https://pastebin.com/W70jdbkC
#asahi-dev · 2025-03-13 22:24
mischa85but let's see what happens
#asahi-dev · 2025-03-13 22:23
mischa85happy days lol
#asahi-dev · 2025-03-13 22:23
mischa85the kernelcache is 110 mbyte and the CS works at 115200 baud
#asahi-dev · 2025-03-13 22:22
chaos_princessjust skip it

plus ›