#
#asahi-dev · 2025-12-22 16:16
fl0_idanything equal or above 2.0.0 works
#asahi-dev · 2025-12-22 16:15
fl0_idyes it's fixed in newer sdks https://github.com/raspberrypi/pico-sdk/blob/master/tools/pioasm/CMakeLists.txt
#asahi-dev · 2025-12-22 16:14
fl0_idmaz it's in pioasm of pico-sdk. but yet, bumping the sdk version / git commit should probably work. at least there was some disussion that this was fixed. lemme check pioasm
#asahi-dev · 2025-12-22 15:27
mazmaybe I should just bump the SDK version.
#asahi-dev · 2025-12-22 15:26
mazor is that in the bowels of pico-sdk?
#asahi-dev · 2025-12-22 15:25
mazfl0_id: I'll take a patch if you can be bothered to write one.
#asahi-dev · 2025-12-22 14:16
nickchan...fixes itself after a reboot, so whatever
#asahi-dev · 2025-12-22 14:10
nickchanand if i specify a custom path with the -d option, and I tried each of /sys/class/i2c-dev/i2c-1/device/1-... those do nothing
#asahi-dev · 2025-12-22 14:10
nickchanfirst the default i2c path is gone so the tool panics
#asahi-dev · 2025-12-22 14:09
fl0_idok fixed by just bumping the version requirement, once I found the right file
#asahi-dev · 2025-12-22 14:02
nickchanjannau: tuxvdmtool isn't working with 6.17.12-400.asahi.fc42.aarch64+16k on a j314s host
#asahi-dev · 2025-12-22 13:58
fl0_id(for flashing to the pi-pico)
#asahi-dev · 2025-12-22 13:58
nickchanugh i replied to v5 instead of v6 but v6 still has the same issue
#asahi-dev · 2025-12-22 13:58
fl0_iddoes anybody have a quickfix for building cs-sw with a newer cmake? some part of pico-sdk apparently expects an older cmake version and I cannot easily install one
#asahi-dev · 2025-12-22 13:57
nickchanno wonder buttons on a11 don't work the macsmc-input series had a wrong kconfig option
#asahi-dev · 2025-12-22 13:09
leiotypical traditional place would be at least after the demux (either before or after h264parse should be fine) and before kmssink
#asahi-dev · 2025-12-22 13:08
leiopipeline looks obvious, but I'd put 1 or 2 queue somewhere to have some multithreading in there
#asahi-dev · 2025-12-22 13:03
chadmedyeah thats the plan for tomorrow or after christmas. just wanted to keep as many things out of the pipeline as possible to make sure the stuff i did to the driver actually works
#asahi-dev · 2025-12-22 13:01
jannauah. you could try waylandsink full screen or with enabled overlays in kwin
#asahi-dev · 2025-12-22 12:48
chadmedwe have to skip vsync as kmssink relies on VBIs
#asahi-dev · 2025-12-22 12:47
chadmedgst-launch-1.0 filesrc location=[path] ! qtdemux ! h264parse ! avdec_h264 ! videoconvert ! videoscale ! video/x-raw,format=NV12,width=1024,height=576 ! kmssink driver-name=apple skip-vsync=true
#asahi-dev · 2025-12-22 12:43
chadmedoh right, well it is demuxing an mp4, decoding the h264 within, then converting the yuv420p to nv12 in software, then scaling that down to a sane resolution for the overlay plane
#asahi-dev · 2025-12-22 12:43
leioI meant in terms of anything suspicious to be reason for tearing
#asahi-dev · 2025-12-22 12:40
chadmedjannau: no clue, but the videosrc test didnt do it
#asahi-dev · 2025-12-22 12:39
chadmedleio: its not complicated its just gross :P
#asahi-dev · 2025-12-22 12:27
jannauwhy would it tear at all unless gstreamer writes to currently scanned-out surfaces
#asahi-dev · 2025-12-22 12:22
leioif it helps, I can peek at that pipeline
#asahi-dev · 2025-12-22 12:19
chadmedcould just be my insane gstreamer pipeline too
#asahi-dev · 2025-12-22 12:19
chadmednv12 scanout tears quite badly on both planes but does work
#asahi-dev · 2025-12-22 11:10
nickchanneed to start by assuming the mgmt endpoint a system endpoint as that's required by HELLO
#asahi-dev · 2025-12-22 10:45
nickchanah i think i found my problem
#asahi-dev · 2025-12-22 10:42
nickchanbut i still need to get the hello message before the smc driver can do anything
#asahi-dev · 2025-12-22 10:39
nickchannevermind i think i just misinterepted some logs
#asahi-dev · 2025-12-22 10:27
nickchanI need to block inside apple_smc_probe() until rtkit at least the hello message is processed
#asahi-dev · 2025-12-22 10:25
nickchani need the hello message to tell the start of app ep
#asahi-dev · 2025-12-22 10:25
nickchan...how come apple_rtkit_wake() returns before apple_rtkit_management_rx_hello() is called
#asahi-dev · 2025-12-22 09:55
nickchaninstead of hardcoding their endpoint number
#asahi-dev · 2025-12-22 09:53
nickchanand the rtkit consumer needs to be modified to use that interface
#asahi-dev · 2025-12-22 09:53
nickchanokay v10 will be a bit more complicated at least drivers/soc/apple/rtkit needs a new interface to convert an endpoint number relative to app endpoint start to an absolute endpoint number
#asahi-dev · 2025-12-22 09:12
chadmedwe havent even touched anything there in ages
#asahi-dev · 2025-12-22 09:12
chadmedstarting to think this driver might be a bit of a maintenance nightmare ;)
#asahi-dev · 2025-12-22 08:47
jannauNULL ptr deref in DCP's afk code in asahi-wip/6.18. not sure what could have changed there
#asahi-dev · 2025-12-22 08:40
chadmedyeah looks like it. theres another call with around about the same amount of data. ive got 13.5 on my test machine now anyway
#asahi-dev · 2025-12-22 08:39
jannauchadmed: it might have been renumbered
#asahi-dev · 2025-12-22 08:09
nickchanmin app ep is 0x6 instead of 0x20 - so smc endpoint is 0x6 instead of 0x20
#asahi-dev · 2025-12-22 08:08
nickchanfigured the other important difference needed to do anything specific to rtkit v10
#asahi-dev · 2025-12-22 07:49
chadmedA408/swap_submit_dcp disappeared with macos 14 fantastic
#asahi-dev · 2025-12-22 07:03
nickchannamely - macsmc 236000100.smc: error -EINVAL: Failed to start SMC endpoint
#asahi-dev · 2025-12-22 07:01
nickchanans2 works as is after adding rtkit v10 support while smc needs additional modifications
#asahi-dev · 2025-12-22 06:21
chadmedoh they pad unswapped surfaces with 0xaa in the IOSurface array

plus ›