#
#asahi-dev · 2026-01-18 16:31
yukaif the initial baud rate on the other side is not 1.5M, it will always fail get the iodev_whami(), and then wrongly assume it's already set to 1.5M
#asahi-dev · 2026-01-18 16:31
yuka(and adjust the baudrate)
#asahi-dev · 2026-01-18 16:31
yukaI still don't see any way for proxyclient to work if the initial baud rate does not match (before even attempting to check)
#asahi-dev · 2026-01-18 16:21
yukathat works
#asahi-dev · 2026-01-18 16:21
yukaSo, if I use a stage 1 m1n1 with usb support (no BRINGUP), I can connect via usb and set the uart baud rate to 115200, and then hardcode it to the same in bootstrap_port()
#asahi-dev · 2026-01-18 16:16
yukayes, still 0xc on t8132 too
#asahi-dev · 2026-01-18 16:07
jannauit is still 0xc on m3 so ~24 MHz
#asahi-dev · 2026-01-18 16:06
nickchando some math and the UART_CLOCK can be recovered if it changed
#asahi-dev · 2026-01-18 16:05
nickchanwhat would be useful is reading the default UBRDIV when it's 115200
#asahi-dev · 2026-01-18 16:04
jannauI doubt that t8132 is too slow for 1.5M baud
#asahi-dev · 2026-01-18 16:03
yukait's already not happening
#asahi-dev · 2026-01-18 16:03
jannauyuka: https://paste.centos.org/view/4dc54de9 disables the baud rate switch
#asahi-dev · 2026-01-18 16:02
yukamaybe I don't understand how baud rates work
#asahi-dev · 2026-01-18 16:02
yukain my case, it does the iodev_whoami(), which fails so it sets do_baud = False and assumes 1500000. If I set this to anything else, it would mismatch the baud rate configured on the m1n1 side, no?
#asahi-dev · 2026-01-18 16:01
yukaso it will never work on devices where 150000 baud rate does not work?
#asahi-dev · 2026-01-18 15:58
nickchanhttps://github.com/AsahiLinux/m1n1/blob/717054aaf02c5419cd59fe9c78bae65afda70713/proxyclient/m1n1/proxyutils.py#L543
#asahi-dev · 2026-01-18 15:58
nickchanyuka: it assumes the other side is already 1500000
#asahi-dev · 2026-01-18 15:57
yukaI'm not sure how it works, how does the proxyclient tell m1n1 to adjust its baudrate if the m1n1 receiving baud rate is initially wrong?
#asahi-dev · 2026-01-18 15:56
nickchanyuka: the proxyclient does
#asahi-dev · 2026-01-18 15:55
yukaI don't see m1n1 configuring its local baud rate to anything by default
#asahi-dev · 2026-01-18 15:55
nickchantry a lower baud then
#asahi-dev · 2026-01-18 15:54
yukawithout cpufreq
#asahi-dev · 2026-01-18 15:54
yukamaybe t8132 is too slow for 1500000?
#asahi-dev · 2026-01-18 15:46
yukafull output: https://termbin.com/zpil
#asahi-dev · 2026-01-18 15:41
yukaNo, I just tested it with my Asahi machine, the uart works bidirectionally
#asahi-dev · 2026-01-18 15:40
yukabut maybe the other direction does not work
#asahi-dev · 2026-01-18 15:39
yukawith picocom
#asahi-dev · 2026-01-18 15:39
yukaI do see the boot log from m1n1
#asahi-dev · 2026-01-18 15:39
jannauthat sounds if there is nothing on the uart. either m1n1 is broken or it fails to switch the remote port to debug
#asahi-dev · 2026-01-18 15:38
yukathe noop command
#asahi-dev · 2026-01-18 15:38
jannauyuka: what does fail? a proxy noop command or the baud rate switch?
#asahi-dev · 2026-01-18 15:36
yuka> m1n1.proxy.UartTimeout: Expected 1 bytes, got 0 bytes
#asahi-dev · 2026-01-18 15:35
yukasadly, proxyclient still does not work
#asahi-dev · 2026-01-18 15:35
yukamade the central scrutinizer firmware present two serial ports for control commands and the uart
#asahi-dev · 2026-01-18 15:35
yukahttps://cyberchaos.dev/yuka/cs-sw/-/commit/35b9d757c9885900be00d4b98c18572c7eb72131
#asahi-dev · 2026-01-18 14:26
jannaunvme coproc crashes on m3/14.8.3
#asahi-dev · 2026-01-18 13:31
Shiz-rw------- 1 io staff 13 18 jan. 14:30 /Users/io/.m1n1-history
#asahi-dev · 2026-01-18 13:31
Shizoverriding readline with the `gnureadline` modules 'fixes' it but uhh
#asahi-dev · 2026-01-18 13:31
Shizhas anyone gotten similar readline errors like this? https://txt.shiz.me/YzhmMDdkOT
#asahi-dev · 2026-01-18 12:56
integralpiloti'll send it again as a reply all, sorry!
#asahi-dev · 2026-01-18 12:56
integralpilotoh that was only for jannau's
#asahi-dev · 2026-01-18 12:55
integralpilotOOOPS i replied instead of reply all :(
#asahi-dev · 2026-01-18 12:27
svendon't see any suspicious change in drivers/thunderbolt
#asahi-dev · 2026-01-18 12:27
sveni think my tbt issue is something in atcphy at this point
#asahi-dev · 2026-01-18 12:21
nickchanACPW doesn't exist on t8015 so keeping the current check would be good
#asahi-dev · 2026-01-18 12:18
noopwafelI only just realized that I can chainload macos, which is _amazing_.
#asahi-dev · 2026-01-18 12:17
jannaunickchan: I guess the point is moot if we do dynamic properties anyway. I was my assumption
#asahi-dev · 2026-01-18 12:16
nickchani don't get the logic there
#asahi-dev · 2026-01-18 12:16
jannauyes, it switches by default to 1.5M
#asahi-dev · 2026-01-18 12:16
nickchanjannay: why must AC-n and AC-i be present if only ACPW is present

plus ›