#
#asahi-dev · 2026-02-21 21:42
jannauI use `tio -m INLCRNL,OCRNL -b 500000 /dev/m1n1-sec` instead of picocom-sec.sh. can deal on its own with absent device nodes
#asahi-dev · 2026-02-21 21:41
jannauin that case ACM1 as provided by m1n1 over USB will be used
#asahi-dev · 2026-02-21 21:40
jannauthere won't be anything on the m1n1 provided cdc acm ports unless you boot u-boot under HV
#asahi-dev · 2026-02-21 21:39
jannausiirko[m]: it will log on hw uart, so on another mac on ttySAC (connect to dfu port on both system) or the central scrutinizer one
#asahi-dev · 2026-02-21 21:39
siirko[m]From my understand ACM1 is just here for enabling proxy and then ACM0 to send payloads (https://asahilinux.org/docs/sw/m1n1-user-guide/#backdoor-proxy-mode-in-stage-1-release-builds mentionned at the end of documentation) I tried to picocom on ACM0 and send payloads on ACM1 but it wont work
#asahi-dev · 2026-02-21 21:35
fl0_id(or use by-id/... or whatever it's called, so that numbers do not change on reconnect potentially
#asahi-dev · 2026-02-21 21:35
fl0_idwell, based on my understanding the proxy uses one part, f.e. ttyACM0, the second one will use ttyACM1 (for example). or if you use the udev files, it should figure it out automatically
#asahi-dev · 2026-02-21 21:32
siirko[m]fl0_id: wait, for on which port do I have to listen with that script ?
#asahi-dev · 2026-02-21 21:27
fl0_idor sth like that
#asahi-dev · 2026-02-21 21:27
fl0_idand you are listening to uart with picocom-sec.sh?
#asahi-dev · 2026-02-21 21:26
siirko[m]fl0_id: Yes I have the right port, I’m sending the payload through the proxy from my main workstation through a usb cable
#asahi-dev · 2026-02-21 21:22
fl0_idyeah that's my understanding usually, but wasn't sure about uboot
#asahi-dev · 2026-02-21 21:12
chaos_princessif my understanding is right - cs/another mac if you are booting as payload; usb uart if you are booting as guest
#asahi-dev · 2026-02-21 21:11
fl0_id(also not sure if you need sth like central scrutinizer for this uart or if it should work with usb-c)
#asahi-dev · 2026-02-21 21:10
fl0_iddo you have the right port? is your cable the right one?
#asahi-dev · 2026-02-21 21:06
siirko[m]Apparently you can have uart output for u-boot debugging https://docs.u-boot.org/en/latest/board/apple/m1.html#debug-uart, I retrieved correct uart base addr for M3 (0x2a1200000) but still nothing shows up. If anyone have some more experiences with u-boot I would be happy to talk
#asahi-dev · 2026-02-21 20:43
fl0_id(my changes are not online anywhere yet)
#asahi-dev · 2026-02-21 20:43
fl0_idbtw, i modified https://github.com/Dil4rd/dpp/tree/main/apfs (MIT) to work with no_std + alloc. maybe interesting for m1n1. seems to work, but needs more testing. reading only so far and muti volume support is just added
#asahi-dev · 2026-02-21 14:58
siirko[m]jannau: oh, really sorry didn't know about that
#asahi-dev · 2026-02-21 14:58
jannauplease do not edit messages. it's very annoying on irc side
#asahi-dev · 2026-02-21 14:58
siirko[m]s///
#asahi-dev · 2026-02-21 14:58
siirko[m]* jannau Hi, I've dumped my ADT, there is a lot of info but I found some infomration about pcie addr/size, but I'm not sure of other information ... For example in actual layout it is mapped like... (full message at <https://matrix.org/oftc/media/v1/media/download/AfzThpj74tiwzv0eXkpdHAkbqJf0xtA6-wUrqpiNGGEDPIs-vZGnxNKIwlutLSOyTKYrqYsRzVFxEWr3b1WDZS9CecyM5ijgAG1hdHJpeC5vcmcveHRNQm9sa1NFeWxmd3FpS2NxQWJodVht>)
#asahi-dev · 2026-02-21 14:58
siirko[m]* jannau Hi, I've dumped my ADT, there is a lot of info but I found some infomration about pcie addr/size, but I'm not sure of other information ... For example in actual layout it is mapped like... (full message at <https://matrix.org/oftc/media/v1/media/download/AWMa5WStWfqYloN29OoatvKumcZRSuTuLLxOUUNEghGMRmuMjsTHYRlqcLjyvdo_ACjL8CHruXlBrHsuXFEt7whCecyM4thgAG1hdHJpeC5vcmcvVVd2dGVIY0diV1BtQ2t3dU9WcU56Vm1W>)
#asahi-dev · 2026-02-21 14:57
siirko[m]* jannau Hi, I've dumped my ADT, there is a lot of info but I found some infomration about pcie addr/size, but I'm not sure of other information ... For example in actual layout it is mapped like... (full message at <https://matrix.org/oftc/media/v1/media/download/ASkFqE_uvqRcCcBh4F3dL9N5QpRhXQqV8A5aHnGXz-RTlL81vyYd9NxsZ3vxBetl4GTaiysXkey2_wV7fXnuLkNCecyM39pgAG1hdHJpeC5vcmcveEJZUkRVRm1SbU94alFJbndPcmF4Skxu>)
#asahi-dev · 2026-02-21 14:57
siirko[m]jannau Hi, I've dumped my ADT, there is a lot of info but I found some infomration about pcie addr/size, but I'm not sure of other information ... For example in actual layout it is mapped like... (full message at <https://matrix.org/oftc/media/v1/media/download/AYj-CEJLKXcxW2evs2YdmMcFjYBaxsECdz1VBNpbEh8co9N2lK8QteOgrrrDWo9kFH7YxACncfbkArsK4By4CDtCecyM3TCgAG1hdHJpeC5vcmcvT2J2VHNjdE1VYkJLeUZWaWNRb1dMR2V1>)
#asahi-dev · 2026-02-21 12:40
fl0_id:)
#asahi-dev · 2026-02-21 12:36
JamesCalligeros[m]Well im sure they had to get the monitors in to test to repro the bugs :p
#asahi-dev · 2026-02-21 12:36
fl0_idor that, but that's not as fun
#asahi-dev · 2026-02-21 12:36
JamesCalligeros[m]I imagine its more like years and years of bug reports
#asahi-dev · 2026-02-21 12:34
fl0_idnow I imagine one engineer having the sole job of testing different monitors for quirks
#asahi-dev · 2026-02-21 07:53
leionicolas17: I used to have one of those U3224KB, wonder what they needed to quirk there, looked OK for that one, unlike my current G80SD
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 04:21
curl_alx_shKArchive joined the game
#asahi-dev · 2026-02-21 04:21
curl_alx_shKArchive left the game
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 04:21
curl_alx_shsamongus
#asahi-dev · 2026-02-21 03:54
nicolas17curl_alxsh: it has been cancelled because you asked too much
#asahi-dev · 2026-02-21 03:53
curl_alxshm3 when?
#asahi-dev · 2026-02-21 03:52
linuxuseralx.sh
#asahi-dev · 2026-02-21 03:51
linuxuseroftc
#asahi-dev · 2026-02-21 03:49
linuxuseralx.sh
#asahi-dev · 2026-02-21 03:47
linuxuserhi
#asahi-dev · 2026-02-21 03:44
linuxuserhttps://www.youtube.com/watch?v=5xlN1W4TuSI
#asahi-dev · 2026-02-21 03:37
nicolas17curl_alx_sh: https://asahilinux.org/docs/project/when-will-asahi-be-done/
#asahi-dev · 2026-02-21 03:32
curl_alx_shm3 when?
#asahi-dev · 2026-02-21 03:31
linuxuserjiggle physics
#asahi-dev · 2026-02-21 03:27
jnwhen it's done; people are working on it, as reported in the last status update

plus ›