#
#asahi-dev · 2026-05-19 11:36
chadmedhmm kCFI does not like the rtc driver
#asahi-dev · 2026-05-19 11:07
NickChan[m]kloenk: S5 is based on A12 so probably too old
#asahi-dev · 2026-05-19 10:53
mazhanging at this stage makes me suspicious of the I2C pups.
#asahi-dev · 2026-05-19 10:51
flokliOk, soldering issue
#asahi-dev · 2026-05-19 10:45
flokliMultimeter says no
#asahi-dev · 2026-05-19 10:43
flokliI checked the soldering once more. It could be there's a connection between the pads on the back of the CS, next to the tx and gnd labels
#asahi-dev · 2026-05-19 10:43
maztry and add some traces to the init code around the FUSB probing in m1_pd_bmc_fusb_setup()
#asahi-dev · 2026-05-19 10:40
flokliI also tried yuka's branch, and pressing ? on ACM0 there doesn't print any further help messages
#asahi-dev · 2026-05-19 10:38
mazthe fact that you don't see any message about the FUSB302 being detected is not good.
#asahi-dev · 2026-05-19 10:38
mazright, that's what I'm using on all my machines.
#asahi-dev · 2026-05-19 10:37
floklib51d9e090b90fe5224f5fab22a3d7c303095cb73
#asahi-dev · 2026-05-19 10:35
mazflokli: what firmware did you flash? can you provide the hash of the top commit?
#asahi-dev · 2026-05-19 10:33
mazif that's not the case, something is odd.
#asahi-dev · 2026-05-19 10:32
mazyou should see some of that: https://git.kernel.org/pub/scm/linux/kernel/git/maz/cs-sw.git/tree/README#n169
#asahi-dev · 2026-05-19 10:32
floklithat's all it spits out, nothing about probing port 0.
#asahi-dev · 2026-05-19 10:31
flokliPress ^_ + ? for help
#asahi-dev · 2026-05-19 10:31
flokliControl character is ^_
#asahi-dev · 2026-05-19 10:31
mazplease read the documentation, all that is explained.
#asahi-dev · 2026-05-19 10:31
flokliThis is the Central Scrutinizer
#asahi-dev · 2026-05-19 10:31
flokli[12:31:29.647] Connected to /dev/ttyACM0
#asahi-dev · 2026-05-19 10:31
mazyes.
#asahi-dev · 2026-05-19 10:31
flokliwhat's the deal with the blinking to stop once I connect to the port? is it expected?
#asahi-dev · 2026-05-19 10:31
mazflokli: do you see any other messages from the CS, indicating the status of VBUS, for example?
#asahi-dev · 2026-05-19 10:30
flokliI have a known-good cable, just tried booting both the m2air and the m4 pro mac mini, both don't spit anything out on the serial
#asahi-dev · 2026-05-19 10:26
mazyuka: I though that was obvious...
#asahi-dev · 2026-05-19 10:26
mazflokli: as long as you use a full-bodied USB-C cable, there is nothing else to do. but the CS should output some other stuff immediately.
#asahi-dev · 2026-05-19 10:26
yukaThe + in ^_+? means 'afterwards' not 'at the same time
#asahi-dev · 2026-05-19 10:25
yukaRight
#asahi-dev · 2026-05-19 10:25
mazno idea about yours.
#asahi-dev · 2026-05-19 10:25
mazyuka: on my keyboard, that's CTRL+SHIFT+- followed by ?
#asahi-dev · 2026-05-19 10:24
yukanope, but make sure it has power
#asahi-dev · 2026-05-19 10:24
floklimaz: Do I need to press any control characters to get the other device into serial mode?
#asahi-dev · 2026-05-19 10:24
yukaHow do you do that on a keyboard?
#asahi-dev · 2026-05-19 10:24
yukaright
#asahi-dev · 2026-05-19 10:23
mazyuka: it is ^_+?
#asahi-dev · 2026-05-19 10:23
yukaflokli: I'm pretty sure your central scrutinizer is fine
#asahi-dev · 2026-05-19 10:22
yukaAnd the serial itself is split out on ACM1
#asahi-dev · 2026-05-19 10:21
yukaThen the help command is just a '?' on ACM0
#asahi-dev · 2026-05-19 10:21
yukaIf you have problems sending the escape codes you can try https://cyberchaos.dev/yuka/cs-sw
#asahi-dev · 2026-05-19 10:21
yukaThe call for help is ctrl+?
#asahi-dev · 2026-05-19 10:15
flokliIs this a soldering issue, or PEBKAC?
#asahi-dev · 2026-05-19 10:14
floklimmh, I got a central scrutinizer flashed with the firmware. it blinks its LED, once I connect to /dev/ttyACM0 it stops blinking, tells me it's the central scrutinizer, and how to get help. the LED stops blinking, and as hard as I try it seems it's not reading the call for help.
#asahi-dev · 2026-05-19 09:53
yukaMaybe useful for debugging
#asahi-dev · 2026-05-19 09:52
yukaBtw kisd also works on macOS if you kill deviceinterfaced before ;)
#asahi-dev · 2026-05-19 09:18
svenit’s not the other end of the one the SoC itself sees though afaict so there must be something else inbetween
#asahi-dev · 2026-05-19 09:18
svennot sure if you noticed, but it’s really just the base of a dockchannel MMIO
#asahi-dev · 2026-05-19 09:17
svenper-chip makes sense
#asahi-dev · 2026-05-19 08:14
kloenkhomepod mini also has no debugusb (and thats the end of devices I have right now :) )
#asahi-dev · 2026-05-19 08:10
yukaand not per-model
#asahi-dev · 2026-05-19 08:10
yukaBut I'm assuming for now the base is per-chip

plus ›