#asahi-dev · 2026-06-25 20:51
yukaI think I might have had the same problem on an M5 Max which I had access to for one evening, but i don't fully remember if it worked with tuxvdmtool or there was some other workaround#asahi-dev · 2026-06-25 20:29
enverbalalicbut that still doesn't give me any output#asahi-dev · 2026-06-25 20:29
enverbalalicif i manually do first reboot, then serial faster then macvdm, it will be a success in putting both target and local into serial mode#asahi-dev · 2026-06-25 20:29
enverbalaliclooks like the reason i'm getting the VDM failed while putting target into serial mode is because the timeout on macvdmtool after reboot and before serial is too big#asahi-dev · 2026-06-25 20:18
fl0_id_afkmmh yeah then it shouldn't matter I guess#asahi-dev · 2026-06-25 20:18
enverbalalicwith the cable connected#asahi-dev · 2026-06-25 20:18
enverbalalicwell i'm doing reboot serial, so it will reboot anyways ?#asahi-dev · 2026-06-25 20:18
fl0_id_afknot sure about macvdmtool, but when I first started with m1n1, my mistake was that I needed to connect the cable before boot on the target. (not sure if relevant here, but just in case...)#asahi-dev · 2026-06-25 20:17
enverbalalicfl10_id_afk: what *exactly* do you mean by that ? :D #asahi-dev · 2026-06-25 20:16
fl0_id_afkenverbalalic dumb question, when did you connect the cable?#asahi-dev · 2026-06-25 20:16
yukaand the hauntedness on M4 is back#asahi-dev · 2026-06-25 20:14
yukaand there is now a prototype linux driver which I'm currently testing#asahi-dev · 2026-06-25 20:13
yukanot useless#asahi-dev · 2026-06-25 20:11
enverbalalicthen again debugusb is useless because linux doesn't support it, right ?#asahi-dev · 2026-06-25 20:08
jvoisinyuka: https://next.ink/244236/apple-applique-des-hausses-vertigineuses-de-prix-sur-les-mac-et-ipad/ the article is in French, but prices raise list is language-agnostic. Sad news :/#asahi-dev · 2026-06-25 20:06
enverbalalicserial does not work on t6041 it seems#asahi-dev · 2026-06-25 20:06
enverbalalicok i get it now through debugusb and cu.kis-100000-ch-0#asahi-dev · 2026-06-25 20:00
sventhat one was just disabled for a few macOS releases for some reason #asahi-dev · 2026-06-25 20:00
svenif that debug_console node exists everything is fine #asahi-dev · 2026-06-25 19:56
enverbalalicthe macos 12 and 13 note in the readme doesn't apply for 26 ?#asahi-dev · 2026-06-25 19:56
yukayes#asahi-dev · 2026-06-25 19:55
enverbalalicand m1n1 should start dumping stuff to it#asahi-dev · 2026-06-25 19:55
yukaso that you don't miss any messages#asahi-dev · 2026-06-25 19:55
yukaor picocom before the reboot serial#asahi-dev · 2026-06-25 19:55
yukayes#asahi-dev · 2026-06-25 19:55
enverbalalicwhat's the full workflow with this if someone is using this day to day ? is it really as simple as connect -> reboot serial -> picocom tty.debug-console#asahi-dev · 2026-06-25 19:55
yukamaybe serial is not on the dfu port anymore, what do we know#asahi-dev · 2026-06-25 19:55
yukastill, you can of course try all usb-c ports#asahi-dev · 2026-06-25 19:54
jannauand also only the 14-inch version#asahi-dev · 2026-06-25 19:54
chaos_princessoh, i see#asahi-dev · 2026-06-25 19:54
enverbalalicso just base m4 ?#asahi-dev · 2026-06-25 19:53
enverbalalicchaos_princess: excluding pro or max#asahi-dev · 2026-06-25 19:53
yukaWow#asahi-dev · 2026-06-25 19:52
chaos_princesshttps://support.apple.com/en-us/120694 - they changed it on m4#asahi-dev · 2026-06-25 19:51
enverbalalicyuka: so i have a target macbook pro 16 m4 max, using the port nearest to the magsafe, the source is a m2 air, again using the port nearest to the magsafe, so rear left as it should be#asahi-dev · 2026-06-25 19:50
jannauenverbalalic: have you tried it in the reverse direction?#asahi-dev · 2026-06-25 19:49
yukaenverbalalic that looks like you're not using the dfu port#asahi-dev · 2026-06-25 19:49
enverbalalicre:macvdmtool serial. I got another fat USB4 cable that supports display out, again no serial on it.. macvdmtool is again 9/10 times returning vdm failed when putting target into serial mode (reply: 0x05ac80d2). macvdmtool logs from the m2 are https://pastebin.com/u5LThCha#asahi-dev · 2026-06-25 19:48
fl0_id_afkgargantua where are you, puh#asahi-dev · 2026-06-25 19:42
gargantuawas 46c here#asahi-dev · 2026-06-25 19:41
svenoh.. right, monday's down to 29 now. nice.#asahi-dev · 2026-06-25 19:41
svensaturday seems to be worst here, 39°C#asahi-dev · 2026-06-25 19:31
jannaumonday should be already reasonable. In Berlin Sunday will probably the hottest day. currently predicted with 40°C (down from 41°)#asahi-dev · 2026-06-25 19:27
svenstill not sure how i'll survive saturday without AC#asahi-dev · 2026-06-25 19:27
svenguess it'll work fine until tuesday or so then :(#asahi-dev · 2026-06-25 19:25
yukaprobably because it's 5 degrees warmer in here (/j)#asahi-dev · 2026-06-25 19:21
yukaOdd: I wanted to debug the M4 crashes a bit more, returned to the exact setup from last time (switch_boot_cpu and then boot linux with maxcpus=1 on a secondary), but this time it boots reliably#asahi-dev · 2026-06-25 19:18
jannauso there is no reason to rush #601 in before the release, not that I would expect any issues from it#asahi-dev · 2026-06-25 19:12
flokliyuka and I usually use the build deps from nixpkgs (which follows the releases) as a basis for a development shell to tinker with the python scripts. But we didn't package the scripts themselves in there, as chances are you already have an m1n1 checkout somewhere if you use the scripts.#asahi-dev · 2026-06-25 18:57
jannauis anyone using releases for m1n1 proxyclient / python scripts?