#
#asahi-dev · 2026-07-09 18:28
svenwonder if there's another weird issue like that hiding somewhere in the hv code. i really don't want to debug another one like that though ;)
#asahi-dev · 2026-07-09 18:26
svenyeah
#asahi-dev · 2026-07-09 18:25
chaos_princesswell, that is why i haven't done it yet, don't see how it might be relevant
#asahi-dev · 2026-07-09 18:25
svenonce they’re up everything should be fine
#asahi-dev · 2026-07-09 18:25
sventhat should only matter during smp bringup
#asahi-dev · 2026-07-09 18:24
chaos_princessbut i haven't pulled in your cache maintenance patches yet
#asahi-dev · 2026-07-09 18:23
chaos_princessyes, when running on >1 cpu
#asahi-dev · 2026-07-09 18:23
svenhuh, is the hv still unstable on m3?
#asahi-dev · 2026-07-09 18:22
chaos_princesson c, --cpus=4 helps a lot
#asahi-dev · 2026-07-09 18:21
jannauI can try but I do not have much luck with hv / macos, especially with tracers
#asahi-dev · 2026-07-09 18:19
chaos_princessmind running the isp tracer on j504 and j514s and sending the logs (it will most likely crash, that is expected).
#asahi-dev · 2026-07-09 18:18
jannauj504, j514s, j514c
#asahi-dev · 2026-07-09 18:17
chaos_princessbtw, which m3 devices do you have
#asahi-dev · 2026-07-09 18:17
jannauasahi-wip refreshed. I've merged avd and t6031 isp. bits/001-devicetree-m3 is gone. commits moved to bits/000-devicetree. yuka's m4 devicetrees are merged as well
#asahi-dev · 2026-07-09 18:01
jannauoh, I completely missed that there is already a workflow
#asahi-dev · 2026-07-09 17:59
chaos_princessthe version is pinned there
#asahi-dev · 2026-07-09 17:59
chaos_princesshttps://github.com/jannau/avd-fw/blob/af25aaca0bc48f7cc91c263f08f5bb01f563c05e/.github/workflows/ci.yml#L5
#asahi-dev · 2026-07-09 17:59
chaos_princessupstream is not running on latest
#asahi-dev · 2026-07-09 17:57
jannauresulting in https://github.com/jannau/avd-fw/actions/runs/29038426817/job/86189245232 vs. https://github.com/AsahiLinux/avd-fw/actions/runs/29038443342/job/86189301239?pr=3
#asahi-dev · 2026-07-09 17:56
jannauhow does github determine what ubuntu-latest is? In my repo it's resolute but in https://github.com/AsahiLinux/avd-fw it's noble
#asahi-dev · 2026-07-09 17:20
jannauon normal devices the eusb repeater is reset via atc to make hotplug work
#asahi-dev · 2026-07-09 17:19
jannauah, I thought the repeater had a function-reset as well
#asahi-dev · 2026-07-09 17:17
yukayes, only the hub has a "function-reset"
#asahi-dev · 2026-07-09 17:17
yukaand what was the way to reset it again?
#asahi-dev · 2026-07-09 17:17
yukaor was it the opposite?
#asahi-dev · 2026-07-09 17:17
yukaonly the hub needed resetting?
#asahi-dev · 2026-07-09 17:16
yukabut I think the usb2 repeater was always present on the i2c bus?
#asahi-dev · 2026-07-09 17:16
yukaAh, no
#asahi-dev · 2026-07-09 17:16
jannaudo you reset the usb2 repeater?
#asahi-dev · 2026-07-09 17:01
yukait's very possible some setup of the usb repeater over i2c is necessary
#asahi-dev · 2026-07-09 16:41
yukaI don't know yet how to tell which smc keys are gpios
#asahi-dev · 2026-07-09 16:41
yukaAnd then write an automated test
#asahi-dev · 2026-07-09 16:40
yukathe uart is too slow for smccli
#asahi-dev · 2026-07-09 16:40
yukaI should probably add a more specialized proxy command which is small enough to run over the broken/slow uart, takes a gpio name and state and toggles that gpio before turning on usb
#asahi-dev · 2026-07-09 16:38
yukathis pulls the port out of debugusb mode (I confirmed that this works in principle on a device without usb hub)
#asahi-dev · 2026-07-09 16:38
yukathen run the INIT_USB command and quickly re-plug the usb cable
#asahi-dev · 2026-07-09 16:38
yukaI start out in debugusb mode, enable/disable the gpio(s) via smccli
#asahi-dev · 2026-07-09 16:37
yukathe way I currently test is using a new INIT_USB proxy command which has 5 seconds of delay built in
#asahi-dev · 2026-07-09 16:37
yuka* by pass the usb hub
#asahi-dev · 2026-07-09 16:37
yukaOne of the following to assumptions is wrong: 1. toggling the gpio is enough to bypass the usb, 2. the gpio is one of gP?? on the SMC
#asahi-dev · 2026-07-09 16:36
yukano luck so far
#asahi-dev · 2026-07-09 16:35
yukaI took a stab at finding the gpio to bypass the usb hub on the NEo
#asahi-dev · 2026-07-09 16:31
svenhttps://github.com/AsahiLinux/m1n1/pull/619
#asahi-dev · 2026-07-09 16:26
svenphew... i expected this bug to be much worse :-)
#asahi-dev · 2026-07-09 16:25
svenyup, it's stable now
#asahi-dev · 2026-07-09 16:11
sveni'll just clear it in chickens.c
#asahi-dev · 2026-07-09 16:11
svenyup, on first boot of the secondaries the bit is clear, then if i do stop -> start that bit is still set
#asahi-dev · 2026-07-09 16:09
chaos_princessthat would make sense then
#asahi-dev · 2026-07-09 16:09
svenso start secondaries -> stop secondaries -> start again -> set wfe mode and it all explodes
#asahi-dev · 2026-07-09 16:09
chaos_princessoh

plus ›