#asahi-dev · 2026-08-13 19:26
jannausven: https://paste.debian.net/hidden/a248a14a#asahi-dev · 2026-08-13 19:26
svenif we saw interrupts then the packets would arrive and something else would be broken#asahi-dev · 2026-08-13 19:25
svenbut we should see interrupts on ring1 and chaos' /proc/interrupts showed there was nothing there#asahi-dev · 2026-08-13 19:25
chaos_princessit kinda does, there is arp involved#asahi-dev · 2026-08-13 19:24
svenit's essentially ethernet frames with an additional header iirc#asahi-dev · 2026-08-13 19:24
jannauit's direct host to host network without ethernet. so the MAC address shouldn't matter#asahi-dev · 2026-08-13 19:23
nicolas17how does thunderbolt networking work anyway? is it IP over Thunderbolt or is there an Ethernet frame layer in between too?#asahi-dev · 2026-08-13 19:23
jannauswitched to acio2 on the t6001 without change. I'll switch back to acio1 for the hv read32#asahi-dev · 2026-08-13 19:22
svenon the t6001#asahi-dev · 2026-08-13 19:22
svenread32(0xb01f84008)#asahi-dev · 2026-08-13 19:22
svenplease :)#asahi-dev · 2026-08-13 19:22
svenread32(0xb01fd0000)#asahi-dev · 2026-08-13 19:22
svenread32(0xb01f14008)#asahi-dev · 2026-08-13 19:22
svenread32(0xb01f10008)#asahi-dev · 2026-08-13 19:21
jannauyes, still in the hv on both systems, using acio1 on both#asahi-dev · 2026-08-13 19:20
jannauthe thunderbolt0 devices have the same MAC but that doesn't seem to be an issue (was the same for t8103/t8103)#asahi-dev · 2026-08-13 19:20
svenif yes, which acio port are you using?#asahi-dev · 2026-08-13 19:20
svenare you still in the hv on the t6001?#asahi-dev · 2026-08-13 19:19
jannauping reports "Destination unreachable: Address unreachable" / "sendmsg: No route to host" so I'd assume no#asahi-dev · 2026-08-13 19:15
svenand i assume you also see no packets in tcpdump on either side?#asahi-dev · 2026-08-13 19:15
sveni'm really running out of ideas at this point#asahi-dev · 2026-08-13 19:14
svencan you compare the atcphy bringup that macos does vs. what we do?#asahi-dev · 2026-08-13 19:11
jannauboth tbt_net and _stream appear to be broken for t8013/t6001. I did not test tbt_stream for t8103/t8103 but would expect it to work#asahi-dev · 2026-08-13 18:51
RafayYeah. It still has usable speeds.#asahi-dev · 2026-08-13 18:50
svenas long as it kinda-sorta-works i'm happy to send a v1 even without lane bonding though#asahi-dev · 2026-08-13 18:50
svenbut will have to check again#asahi-dev · 2026-08-13 18:50
sveni thought i saw in one trace that it failed to negotiate lane bonding and i also saw some syslog messages#asahi-dev · 2026-08-13 18:49
RafayYeah. Does it work for you? I think you said it's broken for you as well?#asahi-dev · 2026-08-13 18:49
svenit just wasn't the root cause of the m1 pro issue#asahi-dev · 2026-08-13 18:49
svenoh right, that was broken for you as well#asahi-dev · 2026-08-13 18:48
RafayWhat about the other lane? #asahi-dev · 2026-08-13 18:45
svennow there's that m1 pro mystery left and then cleaning all this up. and dt-bindings ofc...#asahi-dev · 2026-08-13 18:44
Rafaysven: done#asahi-dev · 2026-08-13 18:18
sven*your#asahi-dev · 2026-08-13 18:18
svenhttps://lore.kernel.org/asahi/20260813-b4-tipd-vdo-fix-v1-1-70317f2cd554@kernel.org/T/#u tipd fix, if you wanna send you tested-by Rafay. i removed one redundant line from the version you tested fwiw#asahi-dev · 2026-08-13 18:07
svenack#asahi-dev · 2026-08-13 18:07
jannauok. I'll test after dinner#asahi-dev · 2026-08-13 18:07
sveni don't think any of the "fixes" we tried did anything#asahi-dev · 2026-08-13 18:06
jannauok, shall I test the same commit I tested for M1<->M1 or have there been fixes I need to take?#asahi-dev · 2026-08-13 18:05
chaos_princesssince it just failed to link between m1 macos and m3max macos#asahi-dev · 2026-08-13 18:04
chaos_princessno, a "is my cable just broken"#asahi-dev · 2026-08-13 18:04
svenfabric firewall that's only enabled on his machine in raw boot mode? :P#asahi-dev · 2026-08-13 18:03
jannauyes, I can test later. not sure what that suspicion would be assuming you have tested that m1/linux to m1max/macos usb4net works#asahi-dev · 2026-08-13 18:02
svenuh oh#asahi-dev · 2026-08-13 18:00
chaos_princessjannau: you have a j314c too, right? Could you also test whether usb4net works? I am having suspicions of the kind i don't want to have#asahi-dev · 2026-08-13 17:16
RafayAround 250-400 Mbits/sec.#asahi-dev · 2026-08-13 17:15
RafayAlso, there was some issue with the other hosts thunderbolt controller from tracing and breaking in m1n1, after reset I am getting much better speeds.#asahi-dev · 2026-08-13 17:14
svenlooks much better