#
✕ nick:yuka
#asahi-dev · 2026-04-12 18:46
yukaHowever, the watchdog is still rebooting after ~120s even though I added the wdt node :(
#asahi-dev · 2026-04-12 18:45
yukafor serial0
#asahi-dev · 2026-04-12 18:45
yukaI was missing the alias in the device tree
#asahi-dev · 2026-04-12 18:45
yukaSo on my t8132 I made some progress in the sense that I figured out why the serial console wasn't properly working except with earlycon=s5l,...
#asahi-dev · 2026-04-10 21:06
yukaAnd I can't write anything to +0x2004, it just stays as 0x000000
#asahi-dev · 2026-04-10 21:03
yukaso yeah I can keep resetting the cur_time to 0 for all the three watchdogs (+0x0, +0x10, +0x20), but then it still reboots after ~120sec
#asahi-dev · 2026-04-10 20:59
yukajannau: what is +0x2000 in your opinion? the kernel driver doesn't use or mention it
#asahi-dev · 2026-04-10 20:22
yukabecause for me it's at 0xaf[something] before it reboots
#asahi-dev · 2026-04-10 20:22
yukaResets = wraps around?
#asahi-dev · 2026-04-10 19:50
yukaOh I commented out the part in wdt_disable to see what was the original value
#asahi-dev · 2026-04-10 19:26
yuka0x1c contains '4' but setting it to 0 (like done by wdt_disable) doesn't stop it from rebooting
#asahi-dev · 2026-04-10 19:26
yukaon m4, +0x0, +0x1, +0x2 are all counting up. 0x04, 0x14, 0x24 contain some non-zero numbers
#asahi-dev · 2026-04-10 19:25
yukabut I guess I have to run it on the m1 pro to get some idea what to expect when the watchdog is disabled
#asahi-dev · 2026-04-10 19:24
yukaThe monitor is useful
#asahi-dev · 2026-04-10 16:11
yukado you have this as well?
#asahi-dev · 2026-04-10 16:11
yuka compatible = [wdt,t8132, wdt,s5l8960x]
#asahi-dev · 2026-04-10 16:11
yukawdt-version = 2
#asahi-dev · 2026-04-10 16:09
yukaOn M4?
#asahi-dev · 2026-04-10 16:02
yukaI will look at this next
#asahi-dev · 2026-04-10 16:01
yukaso the old wdt_disable no longer works
#asahi-dev · 2026-04-10 16:01
yukayeah the watchdog compatible in the adt also changed
#asahi-dev · 2026-04-10 16:00
yukabut I guess wdt_disable
#asahi-dev · 2026-04-10 16:00
yukaI did not know m1n1 did take care of the watchdog unless it went into the hv mode
#asahi-dev · 2026-04-10 16:00
yukaI'm not sure if it's 2 minutes but it does reboot
#asahi-dev · 2026-04-10 16:00
yukaAh
#asahi-dev · 2026-04-10 15:53
yukaFor now this happened from leaving the m1n1 running and after some time the watchdog rebooted the box and then it counted as panic
#asahi-dev · 2026-04-10 15:52
yukaSo I could also modify m1n1 to do this on each boot
#asahi-dev · 2026-04-10 15:52
yukaAh!
#asahi-dev · 2026-04-10 15:30
yukaI thought I was somehow able to remotely put it back into a state where it starts m1n1 again
#asahi-dev · 2026-04-10 15:30
yukabut now the mac mini keeps going back into the "startup disk needs to be repaired" mode which only shows up as Apple, Inc. Mac on usb
#asahi-dev · 2026-04-10 15:29
yukawith the central scrutinizer, I had it set up for a while so that I could reliably boot into the (known good) m1n1 remotely by sending the DUT reset
#asahi-dev · 2026-03-22 10:54
yukait does
#asahi-dev · 2026-03-21 20:39
yukaor else I don't understand how the new 6.19 tag could have any impact on 6.18 kernels
#asahi-dev · 2026-03-21 20:39
yukado you mean in case a 6.18 kernel gets booted with a new 6.19 device tree?
#asahi-dev · 2026-03-21 20:22
yukaThanks!
#asahi-dev · 2026-03-21 09:07
yukaI'm running the 6.19 based asahi-wip branch since it was pushed. What is still missing to tag it? Are there any known issues?
#asahi-dev · 2026-03-11 08:09
yukaquestion is how much power saving we get from shutting all except one vs all
#asahi-dev · 2026-03-11 08:06
yukachaos_princess: re sleep does this fully shut down all cores? If yes, would shutting down all cores except one E-core work?
#asahi-dev · 2026-03-10 08:34
yukaI think completely shutting the core so that it would boot back up at RVBAR
#asahi-dev · 2026-03-03 08:16
yukaAkechiShiro: there is no M3 Mac Mini?
#asahi-dev · 2026-03-01 23:06
yukaabrender: nnym_: you could test https://github.com/AsahiLinux/m1n1/pull/536
#asahi-dev · 2026-03-01 18:35
yukaworking nicely for me
#asahi-dev · 2026-02-12 09:30
yukacongrats :)
#asahi-dev · 2026-02-09 09:48
yukaon downstream
#asahi-dev · 2026-02-09 09:48
yuka* https://lore.kernel.org/asahi/20260205-asahi-iio-aop-cfg-v1-1-c83e3b00fd0e@kloenk.dev/T/
#asahi-dev · 2026-02-09 09:48
yukaCan someone apply https://lore.kernel.org/asahi/20260205-asahi-iio-aop-cfg-v1-1-c83e3b00fd0e@kloenk.dev/T/#raw ?
#asahi-dev · 2026-02-08 21:26
yukaI also try to use a small config when I don't need more, so even a full rebuild takes <1min
#asahi-dev · 2026-02-08 20:39
yukaI found the uncompressed Image in some nix store path
#asahi-dev · 2026-02-08 20:39
yukait wasn't necessary as far as I can tell
#asahi-dev · 2026-02-08 19:20
yuka(that assumes the problem is from upstream, and not new asahi downstream changes)

plus ›