#asahi-dev · 2022-11-25 22:01
jannauthere's a segment-range for text? dcp misses that on t8103/t600x#asahi-dev · 2022-11-25 21:58
jannauare the top 4 bytes all zero? iirc for dcp it had bits set which didn't make sense as size#asahi-dev · 2022-11-25 21:53
jannaupovik: "32 byte per segment, 8-byte physical addr, 8 bytes unknown, 8-byte device address, 4-byte size, remeining 4 bytes look like flags"#asahi-dev · 2022-11-25 21:47
jannaudart-dcp has them as well but it's a little more complicated since some of the ranges have to be mapped to disp0-dart as well#asahi-dev · 2022-11-25 21:46
jannauI have notes how to parse segment ranges#asahi-dev · 2022-11-25 20:43
jannaudmesg from m1n1 device detection to after powering the device off: https://paste.debian.net/1261876/#asahi-dev · 2022-11-25 20:41
jannausven: looking good here as well. m1n1 device is reliably detected and I haven't triggered the warning so far#asahi-dev · 2022-11-25 15:52
jannauI find it surprising that dwc3_set_mode and __dwc3_set_mode can race each other#asahi-dev · 2022-11-25 15:42
jannauI'll test later#asahi-dev · 2022-11-24 18:08
jannauseems to be often an issue on first cold boot of the device#asahi-dev · 2022-11-24 18:07
jannauit might be related to not detecting m1n1 as device (not sure if that's a host or device problem)#asahi-dev · 2022-11-24 07:16
jannauinstalled here: 22.2.3^t(22:15:21 11/15/22) with set USE=(X gles2 llvm proprietary-codecs wayland zstd) and no setted VIDEO_CARDS#asahi-dev · 2022-11-24 07:11
jannauchadmed: please define massively slow. here (mesa-22.2.3) some operations are noticeably slow (virtual desktop switch, window resize), scrolling in firefox is not smooth but nowhere near of what I would describe as massively slow#asahi-dev · 2022-11-23 18:56
jannaubut I've tested the whole time with identical code in drivers/phy/apple#asahi-dev · 2022-11-23 18:55
jannaunow testing with atcphy-WIP directly#asahi-dev · 2022-11-23 18:54
jannaucable disconnect seems to trigger it as well when the m1n1 device wasn't detected at all#asahi-dev · 2022-11-23 18:50
jannauphy/apple was identical to atchphy-WIP#asahi-dev · 2022-11-23 18:50
jannaupowering it down by long-press on the power button. phy/apple was identical, there were some changes in usb/dwc3 which were probably upstream#asahi-dev · 2022-11-23 18:44
jannaulet me check your tree directly#asahi-dev · 2022-11-23 18:42
jannaurebased on asahi-wip but without differences in phy/apple, usb/typec/tipd, usb/dwc3 except for your irq event initialization patch#asahi-dev · 2022-11-23 18:41
jannaudo you want (the same) tracing?#asahi-dev · 2022-11-23 18:40
jannausven: still a warning on powering the apple silicon m1n1 device down: https://paste.debian.net/1261624/#asahi-dev · 2022-11-23 18:24
jannautouchbar?#asahi-dev · 2022-11-23 18:23
jannauSPI only is for the keyboard unfortunately not interesting#asahi-dev · 2022-11-23 18:23
jannauChaosPrincess: I don't think I saw that while tracing the keyboard/mouse. the sio tracer in hv/trace_keyboard.py had sharp edges but I can't remember any SPI only issues#asahi-dev · 2022-11-22 21:41
jannaufor 4) the kernel is include in the ipsw system images, see https://ipsw.me/product/Mac#asahi-dev · 2022-11-22 21:40
jannaucyrozap: ifixit says asm3142 for the 4 port 24" imac https://www.ifixit.com/Teardown/iMac+M1+24-Inch+Teardown/142850#s288729 not sure about the mac studio. those are the two models which have the asmedia usb host controller#asahi-dev · 2022-11-22 18:42
jannaureboot, there are occasional probe errors with spi-hid or the hid drivers#asahi-dev · 2022-11-22 18:39
jannauon which device?#asahi-dev · 2022-11-22 17:54
jannauand https://lore.kernel.org/all/20221116115348.517599-1-javierm@redhat.com/#asahi-dev · 2022-11-22 17:54
jannauhttps://lore.kernel.org/all/20221114104333.3695531-1-javierm@redhat.com/#asahi-dev · 2022-11-22 17:32
jannauis it probed after 10 seconds? could be probe dependencies inferred from the devicetree and giving up after 10 seconds#asahi-dev · 2022-11-22 17:27
jannauit still turns off the backlight completely but I think kde guesses the correct backlight#asahi-dev · 2022-11-22 15:05
jannauah, yes. I made no change to restore the brightness on reactivating the display. curse of not using a device where the problem occurs#asahi-dev · 2022-11-22 14:57
jannaumarcan: yes, mkinitcpio can be dropped, there was an mkinitcpio upstream release with compressed kernel support, which we don't even need anymore#asahi-dev · 2022-11-22 13:34
jannaumarcan: reads good besides above notes#asahi-dev · 2022-11-22 13:32
jannaufor the 2nd-stage m1n1 update maybe mention https://www.mail-archive.com/tech@openbsd.org/msg72613.html in addition to "linux packages"#asahi-dev · 2022-11-22 13:30
jannaumaybe make "please don't suspend with mounted USB drives" bold#asahi-dev · 2022-11-22 13:23
jannaumarcan: CS42L84 is in the m2 macbook pro 13" as well: s/M2 MacBook Air/M2 MacBooks/#asahi-dev · 2022-11-22 13:08
jannauand I forgot modeset for external displays which are not 1920x1080#asahi-dev · 2022-11-22 13:04
jannaumarcan: notes for the dcp part of the progress report: https://www.jannau.net/asahi/asahi-progress-dcp.txt feel free to edit as you like#asahi-dev · 2022-11-22 12:18
jannauit looks similar to the youtube being issue, i.e. it reproduces the behavior. pipewire doesn't show the same behavior on the same machine#asahi-dev · 2022-11-21 21:00
jannauI'm not really happy about all those static dependencies, especially since there were 2 m1 mbp 13" where booting dcpext failed#asahi-dev · 2022-11-21 20:59
jannauhow the the oob hotplug supposed to work? ensuring probe order via device links?#asahi-dev · 2022-11-21 20:56
jannauI was thinking of the somewhat constructed case of connecting a second display to a m1 device but I guess switching from that was always going to be problematic#asahi-dev · 2022-11-21 20:54
jannaumarcan: one post install issue: audio is broken when starting firefox with headphones connected, replugging the headphones fixes it#asahi-dev · 2022-11-21 20:51
jannauupgraded all asahi installs to the latest asahi-dev (from asahi-dev) without issues#asahi-dev · 2022-11-21 20:49
jannaumarcan: 3 installs without installation related problems. devices: j274, j314c, j375d, macOS: 12.3, 13.0, 12.3 1tr, all into free space, 1 expert mode install#asahi-dev · 2022-11-21 20:46
jannauI think drm expects that available modes/edid are already avaiable at the connector level#asahi-dev · 2022-11-21 20:44
jannauso someone has to look into dynamic connector <-> crtc/dcpext linking? not sure how well that will work