#asahi-dev · 2023-01-18 18:40
jannaus is pro, c is max assuming they kept the m1 scheme#asahi-dev · 2023-01-18 18:36
jannauj41{4,6}{c,s}, j473 and j474#asahi-dev · 2023-01-18 17:37
jannaualyssa: mostly 0xaa though#asahi-dev · 2023-01-18 12:59
jannaubut annoyingly the swap surfaces call data increase from less than 3k to over 6k bytes#asahi-dev · 2023-01-18 12:57
jannaudcp on 13.2 beta looks not terrible but certainly annoying. there are not too many renumbered calls/callbacks. most of that can be probably fixed up from logs alone#asahi-dev · 2023-01-18 08:26
jannaucooling might be an issue with the max assuming keeping it silent (compared to intel mac minis) is a goal#asahi-dev · 2023-01-17 22:45
jannaudid anyone already ran ventura 13.2 beta or earlier in the HV? panics here immediately with "trust cache module 0 has unsupported version 2 @trustcache.c:113" and some AppleImage4 errors before#asahi-dev · 2023-01-17 22:02
jannaustill no new 13.2 beta/rc#asahi-dev · 2023-01-17 22:01
jannauj414s probably#asahi-dev · 2023-01-17 21:57
jannausigh, 16GB to 32GB m2 pro RAM upgrade cost as much as the 32GB to 64GB#asahi-dev · 2023-01-17 17:24
jannauany idea how to wake from s2idle in upstream v6.2-rc4 (without macsmc)? I tried enabling wakeup for usb devices and ttySAC0 but both don't appear to work#asahi-dev · 2023-01-17 16:15
jannaumarcan: with https://github.com/jannau/linux/commit/e941a3e8a1dd7ecdcaa032d1fe75b2fb97ccff3c there is at least no breakage with DART runtime PM, not sure if runtime PM would work correctly if any of the pcie drivers supported it#asahi-dev · 2023-01-17 16:09
jannauruntime pm might be annoying, the internal pcie devices are runtime pm enabled on probe_device#asahi-dev · 2023-01-17 16:00
jannauthis would be for the m2 mb air and and pro 13" which support only 1 external display officially#asahi-dev · 2023-01-17 15:26
jannauI wonder whether the display out switching will work on the m2 laptops too. 2 external displays in clamshell mode could be interesting. I doubt apple will support that in macos#asahi-dev · 2023-01-17 14:40
jannau8k 60 Hz HDMI seems to require two dcpext#asahi-dev · 2023-01-17 14:25
jannauthe second thunderbolt display seems to exclude hdmi#asahi-dev · 2023-01-17 14:24
jannauit looks like they can somehow route dcp over thunderbolt#asahi-dev · 2023-01-17 14:24
jannauno, for the base m2#asahi-dev · 2023-01-17 14:23
jannaum2 mini tech specs say thunderbolt 4 ports and supports two displays over thunderbolt#asahi-dev · 2023-01-17 14:20
jannau10 core is 6p4e#asahi-dev · 2023-01-17 14:19
jannauyes#asahi-dev · 2023-01-17 14:19
jannauwith m2 pro#asahi-dev · 2023-01-17 14:18
jannauapparently also new mac mini#asahi-dev · 2023-01-17 14:17
jannau19/38 gpu cores#asahi-dev · 2023-01-17 14:15
jannauwith wifi 6e and hdmi 2.1 apparently#asahi-dev · 2023-01-17 14:13
jannauhttps://www.apple.com/newsroom/2023/01/apple-unveils-macbook-pro-featuring-m2-pro-and-m2-max/#asahi-dev · 2023-01-17 13:15
jannauit is on the thunderbolt to firewire adapter#asahi-dev · 2023-01-17 13:14
jannausven DSL2210 seems to be a thunderbolt 1 device controller so that is might already be on the ethernet adapter#asahi-dev · 2023-01-15 22:50
jannaunot sure how much that helps though#asahi-dev · 2023-01-15 22:49
jannauthe finger data#asahi-dev · 2023-01-15 22:48
jannauChaosPrincess: the touch data looks like it uses the same format as the touchpad, see struct tp_finger in drivers/hid/hid-magicmouse.c#asahi-dev · 2023-01-15 12:18
jannauI can't repro "fixing" the issue by switching headphone playback mux either, obvious difference is that we're using pipewire while mps uses plain alsa#asahi-dev · 2023-01-15 12:16
jannauI don't see "PLL failed to lock" but PLL_LOCK_STATUS reads back 0x30 instead of 0x10 witj trace_codecs.py#asahi-dev · 2023-01-15 12:11
jannaucs42l42 has sample rate converters#asahi-dev · 2023-01-14 18:35
jannaus/is //#asahi-dev · 2023-01-14 18:35
jannau0x20 is appears in the broken v6.2-rc* builds#asahi-dev · 2023-01-14 18:35
jannauno, 0x10 is the locked bit#asahi-dev · 2023-01-14 18:32
jannaumps said switching the headphone playback mux to secondary and back to primary fixes the distortion (without pipewire/pulseaudio). on j375 with pipewire running that doesn't fix the distortion#asahi-dev · 2023-01-14 18:30
jannauand "REG: R.8 PLL_LOCK_STATUS = 0x30" instead of 0x10#asahi-dev · 2023-01-14 18:29
jannauonly difference I see in a codec trace is a couple of additional "REG: W.8 CCM_CTRL1 = 0x0 (MCLK_SRC=0(RCO), MCLK_FREQ=0(F_12MHZ))" writes#asahi-dev · 2023-01-14 18:28
jannaucs42l83 (j274) has no distortion#asahi-dev · 2023-01-14 18:28
jannausanity check on our changes doesn't show any differences in the codec or device tree#asahi-dev · 2023-01-14 18:26
jannauso introduced with the rebase onto v6.2-rc2#asahi-dev · 2023-01-14 18:26
jannaupovik: asahi-6.1-3 and asahi-6.2-rc2-1 and still present in later asahi-6.2-rc* tags#asahi-dev · 2023-01-14 11:19
jannauno, tas2764 is the speaker codec#asahi-dev · 2023-01-14 11:18
jannauthe only signigficant difference I see with cs42l84 codec tracing is that PLL_LOCK_STATUS changes from 0x10 to 0x30#asahi-dev · 2023-01-14 11:17
jannauok, that means we have to do the reset in suspend anyway to shut rtkit down cleanly#asahi-dev · 2023-01-14 10:55
jannausven: is there a reason why the nvme_disable in apple_nvme_reset_work() is done before (re-)starting rtkit?#asahi-dev · 2023-01-13 06:56
jannaumarcan: we still have a cs42l84 playback regression in 6.2-rc2. looks like a regression caused by an incompatibility of the cs42l84 driver with 6.2-rc2