#asahi-dev · 2026-05-05 07:14
jannauthe fedora44 images from the installer are not bootable because m1n1 and u-boot miss m3 support#asahi-dev · 2026-05-05 07:08
jannauhopefully that will make the wifi firmware hacks obsolete#asahi-dev · 2026-05-05 07:08
jannauthat is waiting on the final m1n1 1.6.0 release and it needs to switch to 14.8.3 update#asahi-dev · 2026-05-05 07:06
jannauunifiedgravity[m]: see https://github.com/jannau/asahi-installer/tree/wip-m3-ipsw-14.6.1 for the patched installer#asahi-dev · 2026-05-05 05:52
jannaumanually#asahi-dev · 2026-05-04 15:25
jannauprobably a different reg then#asahi-dev · 2026-05-04 15:19
jannauiirc dump_pmgr also SErrors on some things on t60xx#asahi-dev · 2026-05-04 11:38
jannaupossible that usb2 can bypass the hub#asahi-dev · 2026-05-04 11:37
jannauthe neo has https://www.ti.com/product/TUSB2E22 which has a mux and is reachable via i2c#asahi-dev · 2026-05-04 11:33
jannauhttps://asahilinux.org/docs/hw/soc/usb-pd/#pin-sets and information how USB-C orientation symmetry works. It will need hardware since those pins are not connected in any standard usb cable#asahi-dev · 2026-05-04 11:07
jannauno, that still prevents you from using usb under HV#asahi-dev · 2026-05-04 11:05
jannauand use the neo's usb2 port#asahi-dev · 2026-05-04 10:54
jannauI think the best bet for the neo is to map debugusb to the non-connected usb2 pins (needs a special cable / breakout board)#asahi-dev · 2026-05-04 10:51
jannauone usb port on the SoC#asahi-dev · 2026-05-04 10:50
jannauthere is only one usb port. usb2 on both ports is through the hub#asahi-dev · 2026-05-03 21:27
jannauany idea why power-states are turned of despite pd_ignore_unused? turning power domains of the lpddr interfaces off has funky effects#asahi-dev · 2026-05-03 17:14
jannau"m1n1 uartproxy v1.6.0-rc1-dirt" works#asahi-dev · 2026-05-03 17:13
jannau"m1n1 uartproxy v1.6.0-rc1-dirty" is 32 chars so the descriptor length is over 64 bytes#asahi-dev · 2026-05-03 17:10
jannauafaik the strings fields can be 255 bytes as utf-16 so that shouldn't be the issue#asahi-dev · 2026-05-03 16:55
jannaureproduced the USB issue. apparently caused having "v1.6.0-rc1-dirty" as BUILD_TAG instead of "v1.6.0-rc1". The build tag is added to the product descriptor. not sure why a longer string would cause this issue#asahi-dev · 2026-05-03 10:21
jannausigh, ideal time for freedesktop-sdk build infra to break down: https://gitlab.com/freedesktop-sdk/freedesktop-sdk/-/work_items/1985#note_3309172658#asahi-dev · 2026-05-03 09:25
jannauthis makes using t603x a little strange. I think I'll just use t6031 even for the multi die stuff#asahi-dev · 2026-05-03 09:22
jannaut6030 (M3 Pro) looks more like an extended M3 or prototype for M4 (6 e-cores, 2 dcpext) than a chopped down M3 Max. it even uses parent_addr 0x210000000 for MMIO instead of 0x200000000 for t603[124]#asahi-dev · 2026-05-03 08:37
jannauJamesCalligeros[m]: doesn't really matter. if it's based on 7.1-rc1 it also has time because I won't start rebasing onto v7.1* before -rc6 (usually later)#asahi-dev · 2026-05-03 08:22
jannauget_reg() translates it to the HW addr#asahi-dev · 2026-05-03 08:21
jannauwhich maps mmio to the parent address 0x210000000#asahi-dev · 2026-05-03 07:33
jannausven: updated qualcomm tbt NHI un-PCI patches https://lore.kernel.org/all/20260428-topic-usb4_nonpcie_prepwork-v2-0-452fb9d63f77@oss.qualcomm.com/#asahi-dev · 2026-05-02 20:02
jannauflokli: I might still have one I can spare#asahi-dev · 2026-05-02 19:35
jannaueverything works now after recompilation#asahi-dev · 2026-05-02 19:34
jannauthe m1n1 usb issue I was talking about in the last hours seems to be a random miscompilation #asahi-dev · 2026-05-02 19:32
jannaufreetolga: I'm missing context. if we're speaking about fuOS on M4 then yes, most likely all macOS 15 versions are broken in one way ore another#asahi-dev · 2026-05-02 19:08
jannaubuild with gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7)#asahi-dev · 2026-05-02 19:08
jannaurandom build issue. bisect ended up blaming a my github workflow change from yesterday and now v1.6.0-rc1 is working#asahi-dev · 2026-05-02 18:46
jannaum1n1 logs sometimes "invalid state in usb_dwc3_ep0_handle_xfer_not_ready: 7, STATE_DATA_RECV_STATUS_DONE for ep 1 (3)"#asahi-dev · 2026-05-02 18:46
jannauissue in m1n1, happens on macOS 13.5 / m2 as well#asahi-dev · 2026-05-02 18:41
jannauthe same thing happens on m2 for a macOS 14.8 install. let's test if it is current m1n1 or macOS 14.8#asahi-dev · 2026-05-02 15:36
jannauit fails with "usb 3-1: can't set config #1, error -71" on the host so it works partially#asahi-dev · 2026-05-02 15:34
jannauit does on the m4 mac mini#asahi-dev · 2026-05-02 15:34
jannauI thought it works without touching the type-c port controller#asahi-dev · 2026-05-02 15:30
jannauis m1n1 usb device mode supposed to work on t603x?#asahi-dev · 2026-05-02 15:24
jannauI need to verify that it is indeed the 14.8.3 installassistent#asahi-dev · 2026-05-02 15:24
jannauyou mean upgrading in place? I dfu restored the 14.6.1 ipsw, and then used the 14.8.3 installassistent to install to a new volume. I got macOS 14.8.5#asahi-dev · 2026-05-02 15:13
jannauwas the trick to get the intended version with installassistent to create a bootable usb storage device?#asahi-dev · 2026-05-02 11:22
jannauv1.6.0-rc1 tageed and pushed, please tests and check the release notes in the tag #asahi-dev · 2026-05-02 09:56
jannauDoes anyone know a reason for not tagging current m1n1 main as 1.6.0? I'll probably tag a rc first to make testing easier#asahi-dev · 2026-05-02 09:53
jannauu-boot asahi-v2026.04-1 pushed out for fedora#asahi-dev · 2026-05-02 09:52
jannaunot planning to work on it for now, I was hoping someone else will take a look#asahi-dev · 2026-05-02 09:51
jannauI get "dockchannel-hid 2fab38000.input: Received packet for uninitialized iface 2" on keypresses#asahi-dev · 2026-05-02 09:48
jannauthat is only the multi touch firmware. I not sure we get to the point of loading it. the initialization is broken#asahi-dev · 2026-05-02 09:45
jannauyes