#asahi-dev · 2026-05-19 10:51
flokliOk, soldering issue#asahi-dev · 2026-05-19 10:45
flokliMultimeter says no#asahi-dev · 2026-05-19 10:43
flokliI checked the soldering once more. It could be there's a connection between the pads on the back of the CS, next to the tx and gnd labels#asahi-dev · 2026-05-19 10:40
flokliI also tried yuka's branch, and pressing ? on ACM0 there doesn't print any further help messages#asahi-dev · 2026-05-19 10:37
floklib51d9e090b90fe5224f5fab22a3d7c303095cb73#asahi-dev · 2026-05-19 10:32
floklithat's all it spits out, nothing about probing port 0.#asahi-dev · 2026-05-19 10:31
flokliPress ^_ + ? for help#asahi-dev · 2026-05-19 10:31
flokliControl character is ^_#asahi-dev · 2026-05-19 10:31
flokliThis is the Central Scrutinizer#asahi-dev · 2026-05-19 10:31
flokli[12:31:29.647] Connected to /dev/ttyACM0#asahi-dev · 2026-05-19 10:31
flokliwhat's the deal with the blinking to stop once I connect to the port? is it expected?#asahi-dev · 2026-05-19 10:30
flokliI have a known-good cable, just tried booting both the m2air and the m4 pro mac mini, both don't spit anything out on the serial#asahi-dev · 2026-05-19 10:24
floklimaz: Do I need to press any control characters to get the other device into serial mode?#asahi-dev · 2026-05-19 10:15
flokliIs this a soldering issue, or PEBKAC?#asahi-dev · 2026-05-19 10:14
floklimmh, I got a central scrutinizer flashed with the firmware. it blinks its LED, once I connect to /dev/ttyACM0 it stops blinking, tells me it's the central scrutinizer, and how to get help. the LED stops blinking, and as hard as I try it seems it's not reading the call for help.#asahi-dev · 2026-05-17 08:13
flokliMmh, debugusb chainloading still is unreliable on the m1n1 side, no?#asahi-dev · 2026-05-16 19:17
flokli🎉#asahi-dev · 2026-05-10 13:59
floklii have a J773s here where I had to disable the secondary wd#asahi-dev · 2026-05-10 13:58
floklibut the ADT lies#asahi-dev · 2026-05-10 13:58
flokliwell, not M4 Max, M4 Pro#asahi-dev · 2026-05-10 13:58
floklinickchan: yes#asahi-dev · 2026-05-10 13:57
flokliok, I'm successfully confused now :D#asahi-dev · 2026-05-10 13:56
flokli(even though it might not be necessary)#asahi-dev · 2026-05-10 13:56
floklidid you test current m1n1 with t8103, is writing to the secondary wd ok there as well?#asahi-dev · 2026-05-10 13:54
flokliIn the dumps I have here, which might be from a more recent macos version, j274ap's wdt/wdt-version is also '2'.#asahi-dev · 2026-05-10 13:52
floklihttps://github.com/AsahiLinux/m1n1/commit/0e88df7bc989a71bda2b8acccc0bd6f5657c3ecb planned to only apply for t814x. j274ap has an offset of 0xeb0000, so it doesn't trigger there currently.#asahi-dev · 2026-05-10 13:52
flokli> the current 0x8008 logic triggers on t8103, that probably shouldn't be changed#asahi-dev · 2026-05-10 13:20
floklijannau: https://github.com/AsahiLinux/m1n1/pull/579#asahi-dev · 2026-05-10 12:21
flokliand t8140 is the A18Pro, we'd also meed to match T8132 or however the adt calls it#asahi-dev · 2026-05-10 12:10
floklijannau: you mean various of these checks for each model?#asahi-dev · 2026-05-10 12:01
flokliok, so j773s and j714 both have a different offset to the secondary watchdog (0x3bff8 instead of 0x8008). Tempted to add this as another check to m1n1's wdt.c#asahi-dev · 2026-05-06 13:06
floklijannau: ty, will check and report back#asahi-dev · 2026-05-06 11:48
floklijannau: yeah, a few seconds. it's a bit hard to time, as I'm using some 'portable screen' that receives power and signal from the mac mini and that whole chain take a bit to wake up#asahi-dev · 2026-05-06 11:39
flokliI will try with another rebased m1n1 tree plus https://github.com/AsahiLinux/m1n1/pull/568 on top. But probably not before tomorrow, lots of travels today#asahi-dev · 2026-05-06 11:36
flokliarryn: 26.4.1, I hear the boot chime, then it shows the support.apple.com/macsetup slideshow#asahi-dev · 2026-05-06 11:08
floklimmh, anyone got some m1n1 booted so far on t6040? maybe it's another instance of iboot being broken or something.#asahi-dev · 2026-05-05 20:59
floklimmpf, same. will debug tomorrow :-D#asahi-dev · 2026-05-05 20:51
flokliThen `csrutil disable`, cause it complained. ignored the 'need to reboot for changes to take effect'. ran again the kmutil command. /macsetup error screen, rebooted into 1tr again, and tried to run kmutil again. still same behaviour#asahi-dev · 2026-05-05 20:49
flokliI ran `kmutil configure-boot -c m1n1-bla.bin --raw --entry-point 2048 --lowest-virtual-address 0 -v /Volumes/m1n1`#asahi-dev · 2026-05-05 20:48
floklithe 'choose startup disk' window apparently also shows the version. both are listed as macOS 26.4.1#asahi-dev · 2026-05-05 20:46
floklisven: how do I know which macOS version is running / was used to install into the second partition? mac mini m4 pro here, I get the boot chime, a progress bar, and then it drops me into a slideshow with support.apple.com/macsetup at the bottom, instead of running m1n1#asahi-dev · 2026-05-02 20:02
flokliCool! DM.#asahi-dev · 2026-05-02 19:46
flokliAnyone has a central scrutinizer left, ideally in Germany or close? I have an m4 pro mini inbound...#asahi-dev · 2026-04-11 13:32
flokliVery nice! Do you expect this to be upstreamable?#asahi-dev · 2026-04-06 17:08
flokliJamesCalligeros[m]: poke on the speakersafetyd tag ;-)#asahi-dev · 2026-03-29 21:13
flokliSo I'll keep my downstream package bump putting to the rev a draft PR ;-)#asahi-dev · 2026-03-29 21:13
flokliOk#asahi-dev · 2026-03-29 15:45
flokliJamesCalligeros[m]: ty! I successfully ran this on my m2air for a while, using DynamicUsers. You plan to tag current main soon?#asahi-dev · 2026-03-28 17:58
flokliJamesCalligeros[m]: https://github.com/AsahiLinux/speakersafetyd/pull/31#asahi-dev · 2026-03-28 15:36
flokliAh, it's not included yet. But seems it should be fairly trivial to add what's still necessary from that PR.