#
✕ nick:chadmed
#asahi-dev · 2026-06-27 13:39
chadmed"yeah cm3 ram base is 0x20000000 except for all the times its not also you might get 4k of ram or 512m of ram who knows"
#asahi-dev · 2026-06-27 13:39
chadmedoh its banked smh
#asahi-dev · 2026-06-27 13:37
chadmedah that'd do it then. also interesting that the ap only has 16k of the cm3's memory mapped
#asahi-dev · 2026-06-27 13:26
chadmed(ive added a memset/memclear and initialised 0x10010000 + 0x4000 to all zeroes, so after i do a bootup log the write cursor should be 1)
#asahi-dev · 2026-06-27 13:26
chadmedhm ive got the ring buffer working on the fw side but idk if the sram mapping is correct. ive put the ring buffer at 0x10010000 + 0x4000, but reading avd->sram + 0x4000 which should be the write cursor gives nonsense values that may or may not be encoded instructions
#asahi-dev · 2026-06-27 13:23
chadmedback in my day naplan was an OMR "shade the bubble" piece of paper
#asahi-dev · 2026-06-27 13:22
chadmedlets goooo
#asahi-dev · 2026-06-26 22:43
chadmedsadly i think we only really have three choices. given that it's abandoned, we could adopt it and fix it so that it works properly, wait and see if that vkvideo shim goes anywhere.... or write a drm/accel driver for the hw and port all the v4l2 bits to vk video in mesa
#asahi-dev · 2026-06-26 13:46
chadmedsofus: your branch is trivial to rebase on top of current asahi-wip, its how ive been testing
#asahi-dev · 2026-06-26 13:04
chadmedit's annoying but imagine if we had to write ASL and build ACPI tables instead
#asahi-dev · 2026-06-26 13:01
chadmedif alsa-ucm-conf-asahi is not version 9 then yeah it will cause issues
#asahi-dev · 2026-06-26 12:59
chadmedthink of how funny it will be trying to explain to mymac flinders st that you melted your speakers
#asahi-dev · 2026-06-26 12:59
chadmedyou could also make sure the volume is *very very low* and comment out the check for -ve power and see what happens
#asahi-dev · 2026-06-26 12:58
chadmedyeah its late
#asahi-dev · 2026-06-26 12:57
chadmed(speakersafetyd also does this so you can also just look at the code there)
#asahi-dev · 2026-06-26 12:57
chadmedthe tas2764 datasheet has the info you need to do the samplewise multiplication to get the voltage and current
#asahi-dev · 2026-06-26 12:56
chadmedyou may need to capture the raw samples from the VISENSE PCM and see what's there
#asahi-dev · 2026-06-26 12:45
chadmedno i think this is more wrong, the voice coil should not be 120 degrees lmao
#asahi-dev · 2026-06-26 12:37
chadmedthought it mightve been the bus keeper masks but that's a 7.1 problem
#asahi-dev · 2026-06-26 12:37
chadmedoh ok yeah try swapping the vi slots then
#asahi-dev · 2026-06-26 12:36
chadmedis your kernel based on 7.1 by any chance?
#asahi-dev · 2026-06-26 12:36
chadmedoh oh oh
#asahi-dev · 2026-06-26 12:35
chadmed-10 W is... not right
#asahi-dev · 2026-06-26 12:35
chadmedin the devicetree, can you swap the v and i slots for each codec
#asahi-dev · 2026-06-26 12:34
chadmedintegralpilot: did it play any sound at all?
#asahi-dev · 2026-06-26 12:27
chadmedi was younger and much stupider (if you can believe thats even possible)
#asahi-dev · 2026-06-26 12:27
chadmedyeah it wouldve been that
#asahi-dev · 2026-06-26 12:27
chadmedi should just delete that from the repo, it's a crime against humanity
#asahi-dev · 2026-06-26 12:26
chadmeddid you use the scuffed genstrap script lol
#asahi-dev · 2026-06-26 12:25
chadmedre speakersafetyd, can you bump the loglevel to debug and pastebin whatever it outputs
#asahi-dev · 2026-06-26 12:24
chadmedintegralpilot: booting from a usb with m1n1 is the _only_ supported way to install gentoo actually
#asahi-dev · 2026-06-26 12:07
chadmedasahi-audio, speakersafetyd and alsa-ucm-conf-asahi from git and you should be golden
#asahi-dev · 2026-06-26 12:07
chadmedyeah that should do it, seems like none of the updates have landed in fedora yet
#asahi-dev · 2026-06-26 12:05
chadmeddid you grab asahi-audio from HEAD too?
#asahi-dev · 2026-06-26 12:05
chadmedoh wait
#asahi-dev · 2026-06-26 12:05
chadmedhmm
#asahi-dev · 2026-06-26 12:05
chadmedalso the volume should not be 90% on the builtin sink, it should always be 100%
#asahi-dev · 2026-06-26 12:04
chadmedok it didnt instantiate the filter chain for some reason
#asahi-dev · 2026-06-26 12:01
chadmedintegralpilot: output of wpctl status pl0x
#asahi-dev · 2026-06-26 12:01
chadmedsofus: bingo, we got it!
#asahi-dev · 2026-06-26 11:59
chadmedsorry, -c /usr/share/speakersafetyd/
#asahi-dev · 2026-06-26 11:59
chadmedsofus: yea still the m1 test branch
#asahi-dev · 2026-06-26 11:59
chadmedintegralpilot: your systemd unit file is for an old version with the black box, just invoke it on the tty with speakersafetyd -c /usr/share/speakersafetyd/conf -m 7
#asahi-dev · 2026-06-26 11:58
chadmedhellsing ultimate abridged, the other h264 video i was testing last night
#asahi-dev · 2026-06-26 11:57
chadmedHUA still doesnt work possible vp offset issue again?
#asahi-dev · 2026-06-26 11:55
chadmedhl1 kleiner voice "thats odd"
#asahi-dev · 2026-06-26 11:55
chadmedit works!
#asahi-dev · 2026-06-26 11:55
chadmedwhat do you know :P
#asahi-dev · 2026-06-26 11:55
chadmedoh for fucks sake
#asahi-dev · 2026-06-26 11:54
chadmedtrue, but i dont recall t8110 being in the adt for it

plus ›