#asahi-dev · 2021-02-03 18:30
Blueriseif I use the mUART to send 1.8V TX through the voltage divier, the 1.8V serial can't read it#asahi-dev · 2021-02-03 18:30
BlueriseI'm testing the voltage divider circuit with the mUART + that 1.8V serial I bought#asahi-dev · 2021-02-03 18:29
Bluerisemarcan, kettenis: ok, one reason is that the HW I got cannot cope with 1.2V#asahi-dev · 2021-02-03 16:20
Blueriseset to 1.8V, but,.. hm#asahi-dev · 2021-02-03 16:19
BlueriseI wonder if my FTDI isn't well enough to recv on 1.2V#asahi-dev · 2021-02-03 16:11
Bluerisegood sign ;)#asahi-dev · 2021-02-03 16:10
Blueriseat least I know I'm still getting output#asahi-dev · 2021-02-03 16:10
Blueriseso there's no prompt, ok#asahi-dev · 2021-02-03 16:10
BlueriseI see, m1n1 prints something and then goes into proxy mode#asahi-dev · 2021-02-03 16:10
Bluerisethat works.#asahi-dev · 2021-02-03 16:10
Blueriseah#asahi-dev · 2021-02-03 16:08
Blueriseshould i see prints frim iboot?#asahi-dev · 2021-02-03 16:07
Bluerisem1 air and m1 mini#asahi-dev · 2021-02-03 16:04
BlueriseExiting DBMa mode... OK#asahi-dev · 2021-02-03 16:04
BluerisePutting local end into serial mode... OK#asahi-dev · 2021-02-03 16:04
BluerisePutting target into serial mode... OK#asahi-dev · 2021-02-03 16:04
BlueriseI'm booting a copy of m1n1 you gave me... nothing :(#asahi-dev · 2021-02-03 16:03
Bluerisethat should do?#asahi-dev · 2021-02-03 16:03
Bluerisepatrick@mone:~/work/github/macvdmtool$ sudo picocom -q --omap crlf --imap lfcrlf -b 115200 /dev/tty.debug-console#asahi-dev · 2021-02-03 16:01
Blueriseanything special I need to do to make picocom work?#asahi-dev · 2021-02-03 16:01
Bluerisethat's why you use picocom?#asahi-dev · 2021-02-03 16:01
Bluerisemarcan: when I use cu on /dev/tty.debug-console I get "couldn't enable hardwar eflow control"#asahi-dev · 2021-02-03 16:00
Bluerisee) my voltage divider doesn't work he#asahi-dev · 2021-02-03 16:00
Bluerised) the pinmuxing doesn't fit#asahi-dev · 2021-02-03 16:00
Bluerisec) the data lines aren't connect properly#asahi-dev · 2021-02-03 16:00
Blueriseb) I already shot my serial port#asahi-dev · 2021-02-03 16:00
Blueriseso either a) 1.8v serial can't read 1.2v serial data#asahi-dev · 2021-02-03 15:59
Bluerisehm#asahi-dev · 2021-02-03 15:59
Bluerisethe fourth cable he found finally had data. until then he blamed the hw :)#asahi-dev · 2021-02-03 15:59
BlueriseI once had someone on a discord who went through three power-only microUSB cables#asahi-dev · 2021-02-03 15:59
BlueriseNah, those have data#asahi-dev · 2021-02-03 15:57
Blueriseat least I'm rather sure they are dumb, because my employer wouldn't buy good ones :D#asahi-dev · 2021-02-03 15:57
BlueriseYeah, I have two dumb ones here that should work as well#asahi-dev · 2021-02-03 15:56
BlueriseAh, right.#asahi-dev · 2021-02-03 15:46
Bluerisethe more expensive, the better, right? ;)#asahi-dev · 2021-02-03 15:45
Bluerisemarcan: yes#asahi-dev · 2021-02-03 15:44
Bluerisewill have a look.#asahi-dev · 2021-02-03 15:44
Blueriseit was a 30-40 euro cable from belkin :P#asahi-dev · 2021-02-03 15:44
Blueriseyup#asahi-dev · 2021-02-03 15:43
Blueriseyeah, but the weird thing is when I flipped it, I only got SBU1 connected, but SBU2 connected nowhere#asahi-dev · 2021-02-03 15:43
Bluerise*sbu1#asahi-dev · 2021-02-03 15:43
Blueriseand check if sbu1 on one breakout board connects to sbu2 on the other#asahi-dev · 2021-02-03 15:43
BlueriseWell, what I tried was: connecting two breakout boards to the same cable#asahi-dev · 2021-02-03 15:41
BlueriseI have a breakout... but SBU1/2 don't work depending on the orientation of the cable... I'm testing it with ... uhm... you know, connection tester#asahi-dev · 2021-02-03 15:40
BlueriseYeah, I saw that, but I didn't see any text telling me which bit is which pinset#asahi-dev · 2021-02-03 15:39
Blueriseah, k#asahi-dev · 2021-02-03 15:37
Bluerisemarcan: how do I change the usb debug command to use a different pinset? 840306 is SBU1/2?#asahi-dev · 2021-02-01 00:11
Blueriseit's like no one cares about SBU :)#asahi-dev · 2021-02-01 00:08
Blueriseapparently you can use either fusb302 or ptn5110 eval board, as long as you don't want to use sbu...#asahi-dev · 2021-02-01 00:08
BlueriseThey are left open in the Type−C connector and no connections in the board.