#asahi · 2026-01-14 09:35
fl0_idyeah... or my soldering is still messed up :/#asahi · 2026-01-14 09:35
mazif you have all the lines, then it should work. the problem is that not even VBUS is seen.#asahi · 2026-01-14 09:33
fl0_idyeah... supposedly it's a usb-c with all lines etc, but I'll try differetn ones#asahi · 2026-01-14 09:32
mazfl0_id: you can hack the firmware to replace ^_ with anything else. but it appears that the FUSB doesn't even see the remote device.#asahi · 2026-01-13 23:36
fl0_id__usually in tmux or similar I don't have issues with C-b or whatever there#asahi · 2026-01-13 23:34
fl0_id__maz, https://www.pastery.net/xvnjhe/ this is prob without debug, I think there is some issue with my control characters not working. I tried my normal keyboard layout and a us one, neither works...#asahi · 2026-01-13 20:25
svenat least until usb works#asahi · 2026-01-13 20:24
svenfor any early bringup really#asahi · 2026-01-13 20:24
svenyou also need hardware serial or a second mac for this fwiw#asahi · 2026-01-13 20:24
freetolgaalright i already got SIP disable#asahi · 2026-01-13 20:24
freetolgagot it#asahi · 2026-01-13 20:24
freetolgapower manager#asahi · 2026-01-13 20:24
freetolgaah pmgr#asahi · 2026-01-13 20:24
pitustwell, it needs to be done anyway#asahi · 2026-01-13 20:24
svenrun strings on the pmgr kext i guess#asahi · 2026-01-13 20:23
svenpitust: sure, but getting the other cores up is going to be _much_ easier than getting the mmio tracer working again#asahi · 2026-01-13 20:23
freetolgadoes asahi wiki tell them?#asahi · 2026-01-13 20:23
freetolgaok any resource what the flags are?#asahi · 2026-01-13 20:23
sveni'd probably run xnu with all PMGR debug flags enabled and see what it prints#asahi · 2026-01-13 20:23
pitustcouldn't you make the mmio tracer work with only one core?#asahi · 2026-01-13 20:23
freetolgawhat do i need to RE#asahi · 2026-01-13 20:23
freetolgacan i try first 2?#asahi · 2026-01-13 20:23
svenonly the last part is related to SPTM#asahi · 2026-01-13 20:22
svenwe need to understand how to turn on power, then how to turn on the other cores and _then_ how to get the mmio tracer working again#asahi · 2026-01-13 20:22
svenno#asahi · 2026-01-13 20:22
freetolgaand that is the thing blocked by sptm anyway#asahi · 2026-01-13 20:22
freetolgagot it, we need to develop firmware right now#asahi · 2026-01-13 20:21
svenso it's much too early to even try booting linux right now#asahi · 2026-01-13 20:21
svenand we also don't know how to turn on the other cores iirc#asahi · 2026-01-13 20:21
svenon m4 we don't even know how to turn on power for the various blocks#asahi · 2026-01-13 20:20
freetolgacan i review the macos device tree to make a linux dts?#asahi · 2026-01-13 20:20
freetolgabut if linux can then initial device tree that prints some kernel logs over serial not impossible?#asahi · 2026-01-13 20:20
freetolgam4#asahi · 2026-01-13 20:20
freetolgaoh but running macos on m1n1 not possible on m#asahi · 2026-01-13 20:16
svenit's when you run linux or macos under m1n1 as a guest and we virtualize the serial and redirect it over usb#asahi · 2026-01-13 20:16
svendepends on what you're trying to do#asahi · 2026-01-13 20:16
freetolgacan i try it out without a second mac=#asahi · 2026-01-13 20:16
freetolgasven: svenpeter[m] hv_serial? what is that#asahi · 2026-01-13 08:52
mazfl0_id: enable debug from the session, disconnect the cable, reconnect it, dump the log somewhere where I can see it.#asahi · 2026-01-13 02:35
fl0_id__i just start with it connected like I would for m1n1. also redid my soldering. any hints welcome...#asahi · 2026-01-13 02:34
fl0_id__maz, hey, when using the cs, what's a good way to see if my solder joints, my cable, or some other part is bad? Like I see the cs in screen, but it never connects. does it a particular order of things#asahi · 2026-01-12 15:39
fl0_id(or it's actually getting further, but just uart through usb from the kernel is broken somehow)#asahi · 2026-01-12 15:22
fl0_idSo my interpretation is that I don't have the right place or it went on for long (in steps) before actually looping#asahi · 2026-01-12 15:21
fl0_idsvenpeter[m] yeah that's what I did / tried to do. at least so far as there is a "known good". however when single stepping it went on for quite some time, and I couldn't get it to the loop in the sense that it didn't return from a step.#asahi · 2026-01-12 15:10
svenpeter[m]where often here means “whenever printf debugging doesn’t cut it anymore and I remember that real debuggers exist” ;)#asahi · 2026-01-12 15:10
svenpeter[m]what I often do is hvc or breakpoint at a known good location and then single step and see what’s going on#asahi · 2026-01-12 14:40
fl0_idsvenpeter[m] yes, the single stepping worked. but somehow the hvc as breakpoints worked better for me, though this may just be a skill issue.#asahi · 2026-01-12 13:53
svenpeter[m]the hv should also support single stepping and breakpoints#asahi · 2026-01-12 13:32
fl0_idyeah that's what I did. but without stashing things, just looking at context manually#asahi · 2026-01-12 13:31
chaos_princesscan treat it like a breakpoint basically