#asahi · 2021-04-17 15:30
marcanarnd: will poke around nvme next btw (now that I can load kernels fast :))#asahi · 2021-04-17 13:45
marcanI thought the three instances were largely unique; what's shared?#asahi · 2021-04-17 11:15
marcan*something* has to change then#asahi · 2021-04-17 11:15
marcanhuh#asahi · 2021-04-17 11:10
marcansven: does it work again if you re-init the phy and such?#asahi · 2021-04-17 11:04
marcansven: in iphone schematics at least, there is a VBUS_DETECT pin on the soc#asahi · 2021-04-17 10:53
marcansven: I wonder if there is a VBUS pin going to the dwc?#asahi · 2021-04-17 09:47
marcanok, it's not the pin mapping; doing it doesn't fix it#asahi · 2021-04-17 09:29
marcannot getting replies#asahi · 2021-04-17 09:29
marcanactually, not sure, something about my vdm stuff is broken right now#asahi · 2021-04-17 09:22
marcansec#asahi · 2021-04-17 09:22
marcanI bet I know what this is; I bet the TI chip does not bring up the DFU mode by default#asahi · 2021-04-17 09:21
marcanso "reconnect" for me means only the USB link, not VBUS#asahi · 2021-04-17 09:21
marcanbut my cable breaks out only D+/D- to the USB end#asahi · 2021-04-17 09:21
marcan*dwc* handles reconnects fine#asahi · 2021-04-17 09:21
marcanthe problem isn't dwc, it's the TI chip#asahi · 2021-04-17 09:21
marcanrepro'd#asahi · 2021-04-17 09:21
marcanyeah okay#asahi · 2021-04-17 09:21
marcanHA#asahi · 2021-04-17 09:20
marcanwait, what happens when you try?#asahi · 2021-04-17 09:19
marcanyup#asahi · 2021-04-17 09:19
marcan:-)#asahi · 2021-04-17 09:19
marcansven: reconnects work fine for me#asahi · 2021-04-17 09:13
marcannobody saw anything#asahi · 2021-04-17 09:13
marcan*force pushes*#asahi · 2021-04-17 09:12
marcanwhaaa#asahi · 2021-04-17 08:55
marcandid you boot with debug enabled? :p#asahi · 2021-04-17 08:54
marcanuh, are you using --tty with the same device as M1N1DEVICE?#asahi · 2021-04-17 08:54
marcanand same with bulk in, you were sending ZLPs all the time which spams the bus#asahi · 2021-04-17 08:54
marcan(not stall)#asahi · 2021-04-17 08:54
marcanI never send anything, it just needs to be there and NAK#asahi · 2021-04-17 08:53
marcanI initialize the interrupt EP now, otherwise the host keeps retrying#asahi · 2021-04-17 08:53
marcanbut then showed up as IN#asahi · 2021-04-17 08:53
marcanI was very confused about the interrupt endpoint which you claimed was OUT :p#asahi · 2021-04-17 08:53
marcanyes, for bulk, because there are both anyway#asahi · 2021-04-17 08:52
marcan0x80 is IN#asahi · 2021-04-17 08:52
marcanyou had the endpoint constant defines backwards btw :p#asahi · 2021-04-17 08:52
marcanlol#asahi · 2021-04-17 08:49
marcanthere are still unimplemented requests but I added a few#asahi · 2021-04-17 08:49
marcanfixed some spec issues too, yeah#asahi · 2021-04-17 08:48
marcanand applied for a proper PID for us#asahi · 2021-04-17 08:48
marcanfixed some fail in USB too (it wasn't actually kicking tx/rx properly, same issue we had with the UART in linux)#asahi · 2021-04-17 08:48
marcan(well, it's not actually backwards compatible at the protocol level, but proxy.py tries the new way before falling back to the old way)#asahi · 2021-04-17 08:47
marcanit's all still backwards compatible with ancient versions. I want to see how long I can get away with my old installed m1n1 that doesn't even support the MMU :)#asahi · 2021-04-17 08:47
marcanso you can now do linux.py --tty /dev/<some uart> with M1N1DEVICE=/dev/ttyACM0 (the m1n1 ACM device)#asahi · 2021-04-17 08:47
marcansven: ^^#asahi · 2021-04-17 08:46
marcan(so the host doesn't see a dead USB device)#asahi · 2021-04-17 08:46
marcanok, USB is done and hooked up to the proxy, and I made Linux boot work properly with it, shutting down and such#asahi · 2021-04-17 07:10
marcanthat's just a funny bouncer#asahi · 2021-04-17 07:10
marcanif it's private it's ok