#asahi · 2023-10-17 13:58
janneghttps://github.com/AsahiLinux/alsa-ucm-conf-asahi/compare/v2...v3#asahi · 2023-10-17 13:53
jannegwhinge: I don't see how the 2 -> 3 update could have broken audio. it only added files for the new models#asahi · 2023-10-16 19:02
jannegI'm still astounded that plymouth doesn't grab the touchbar display on startup and causes problems#asahi · 2023-10-16 19:01
jannegI think kwin/plasma does#asahi · 2023-10-16 18:55
jannegChaosPrincess: bingo. and it does a terrible job in rendering on a 60 pixel wide display since it doesn't pay attention to the rotated display#asahi · 2023-10-16 13:58
jannegsadUser: not really, I'd start looking at https://wiki.t2linux.org/ . I think someone related to that started looking into using the daemon (tiny-dfr) for intel macbooks as well#asahi · 2023-10-16 09:51
jannegthere is / was HDMI USB-C altmode but that is dead and not supported on apple silicon devices. I suspect most usb-c <-> hdmi adapters are based on dp-altmode and a dp-2-hdmi converter#asahi · 2023-10-15 13:47
janneghttps://bodhi.fedoraproject.org/updates/FEDORA-2023-77120cf393#asahi · 2023-10-15 13:46
jannegNefsen402: fedora 39 takes longer since f39 is frozen so it needs a freeze exception. you can install alsa-ucm-asahi-3-1.fc39.noarch.rpm from https://koji.fedoraproject.org/koji/buildinfo?buildID=2306472 directly#asahi · 2023-10-14 20:30
jannegand yes, use 1.4.3#asahi · 2023-10-14 20:29
jannegI think so, iirc it fixed a different issue#asahi · 2023-10-14 19:49
janneggrubby modifies the bls files, you can edit them without it. grub will read them similar to its own config#asahi · 2023-10-14 19:45
jannegNefsen402: no need to recreate grub.cfg, look how grubby works#asahi · 2023-10-14 19:00
jannegeldondev: that means you have installed with 12.3 or 12.4 as stub and nvram should be in the old supported format#asahi · 2023-10-14 18:37
jannegthey won't work on fedora atm since 13.5 uses a different nvram format#asahi · 2023-10-14 18:17
jannegfedora uses bls spec files in /boot/loader/entries, grubby is used as management command#asahi · 2023-10-13 21:10
jannegoh, missed that you got ethernet to work, nevermind#asahi · 2023-10-13 21:09
janneghttps://packages.fedoraproject.org/pkgs/m1n1/m1n1/ and install that in the same go#asahi · 2023-10-13 21:09
jannegteteka: you can download kernel-16k-6*, kernel-16k-core-6*, kernel-16k-modules-6*, kernel-16k-modules-core-6*, kernel-16k-modules-extra-6* from https://download.copr.fedorainfracloud.org/results/@asahi/kernel/fedora-38-aarch64/06517501-kernel/ and install it with `dnf install update/*.rpm` assuming you have them all in the directory update. to be safe also download the latest m1n1 from#asahi · 2023-10-13 18:54
jannegshould be now up to date#asahi · 2023-10-13 18:54
jannegI was just editing the feature support page#asahi · 2023-10-13 18:51
jannegusb device mode in linux is known broken since usb3, the appropiate persion is afaik informed#asahi · 2023-10-11 21:29
jannegyou can delete the isp_* files from /lib/firmware/vendor/apple/ (they are loaded on each boot) and have a crappy camera image. will be fixed by the currently building kernel.#asahi · 2023-10-11 21:17
jannegon M1 and M1 Pro/Max devices that will break the camera but a fixed kernel is already being built#asahi · 2023-10-11 21:15
jannegif the files are missing, run `sudo asahi-fwupdate` and reboot#asahi · 2023-10-11 21:15
jannegit should run automatically on updates but doesn't for some reasons#asahi · 2023-10-11 21:14
jannegydalton: you probably have to run asahi-fwupdate, check if there 3 to 6 isp_* files in /lib/firmware/vendor/apple/#asahi · 2023-10-10 14:21
jannegwhois pb17#asahi · 2023-10-08 19:40
jannegkettenis: which m1n1 version is in stage 1? v1.3.3?#asahi · 2023-10-08 19:29
janneglet me think of a different way to handle the timeouts, I don't think it makes sense to torment you with 1st stage reinstalls#asahi · 2023-10-08 19:27
jannegI can image that the 2nd stage failure you saw could be caused timout due to timing issues in the 1st stage#asahi · 2023-10-08 19:07
jannegcomment the RTKIT_SYSLOG again, sounds like a timing issue and the 25ms are not enough for the studio#asahi · 2023-10-08 18:35
jannegleio: can you uncomment RTKIT_SYSLOG in config.h and #define DEBUG before the includes in src/afk.c#asahi · 2023-10-08 18:34
jannegleio, marcan: keeping the stage 1 m1n1 at a version which doesn't interact with the display is probably safer for now. stage 1 errors are invisible without hw-serial#asahi · 2023-10-08 18:32
jannegpitust: that's systemd preventing you from turning your display off, see https://github.com/WhatAmISupposedToPutHere/tiny-dfr/blob/master/etc/udev/rules.d/99-touchbar-backlight.rules how to prevent that#asahi · 2023-10-08 10:19
jannegleio: you want to update m1n1 to v1.4.2#asahi · 2023-10-08 10:17
jannegstintel: yes#asahi · 2023-10-08 08:22
jannegyes, sbin#asahi · 2023-10-08 08:05
jannegyou need to add /usr/bin/appleh13camerad from recovery/macos to /asahi/all_firmware.tar.gz on the ESP, run asahi-fwupdate and reboot#asahi · 2023-10-07 16:00
jannegChaosPrincess: works here on j314c (m1n1-1.4.0 + asahi-6.5-8 + current bits/{devictree,isp} merged)#asahi · 2023-10-07 14:31
jannegI think that's the wrong sensor config though. it just adds presets for the m1 air and the m1 and m2 macbook pro 13-inch. apparently no vertical video there#asahi · 2023-10-07 09:27
jannegso you have /boot/vmzlinuz-linux-asahi-edge in the rootfs but no initrd?#asahi · 2023-10-07 09:25
jannegthe standard install has just the ESP and the rootfs so everythng looks fine#asahi · 2023-10-07 09:23
jannegdid you get the kernel package(s) re-installed in the vm?#asahi · 2023-10-07 09:10
jannegif the latter does and is functional you can edit the grub entry and remove '-edge' from both kernel and initrd and should be able to boot into the system#asahi · 2023-10-07 09:08
jannegdid it exists in the vm? does /boot/vmzlinuz-linux-asahi exists?#asahi · 2023-10-07 08:46
jannegmilky62772: I suppose that's tricky from a macos VM, I would try to circumvent it by adding a `return 0` at the beginning of /usr/sbin/update-m1n1. this assumes that /m1n1/boot.bin on the ESP is still good (should be the case as long as you're not skipped severall kernel releases)#asahi · 2023-10-06 23:00
jannegI remember one u-boot issue. allocations would fail if some things were not page aligned#asahi · 2023-10-06 22:57
jannegthat 'below 0x0' seems not worrysome. that is just LMB_ALLOC_ANYWHERE#asahi · 2023-10-06 22:55
jannegnothing unexpected