#asahi · 2022-03-20 16:10
jannauRudraSaraswat|btwiusearchandub: 'make -jN bindeb-pkg' in the asahi kernel should work#asahi · 2022-03-20 09:01
jannaua first step towards updating would be a "use existing EFI system partition"#asahi · 2022-03-19 18:29
jannaumost people like their audio and video in sync. if audio isn't broken completely (missing audio device) it will affect video playback#asahi · 2022-03-19 17:10
jannaunot related to the DSP, it's most likely possible to destroy the speaker with too loud audio#asahi · 2022-03-19 17:04
jannausure but that was not asked#asahi · 2022-03-19 17:02
jannauGlanzmann: there is no DSP config for the air in https://github.com/chadmed/asahi-audio#asahi · 2022-03-19 17:00
jannaunyanpasu64: speaker DSP from asahi-audio are for now macbook pro 14/16" only#asahi · 2022-03-19 15:08
jannauthe only change necessary for the aquantia nic was a change to read the mac address from the device tree but that should be already upstream#asahi · 2022-03-19 15:07
jannaumps: no, 1GB is CONFIG_TIGON3, 10GB is CONFIG_AQTION#asahi · 2022-03-19 15:06
jannauit has 1GB thernet with and a 10GB ethernet option#asahi · 2022-03-19 15:03
jannauAQUANTIA is the 10GB ethernet in the mac mini and studio#asahi · 2022-03-19 14:54
jannaujoshtau: brightness is currently just off and on, strange that something turns it to 0% automatically#asahi · 2022-03-19 14:53
jannauChainfire: it's known what needs to be changed and someone was working on it and in contact with the chromium team#asahi · 2022-03-19 14:48
jannaujoshtau: does the screen comes back after pressing "brighter"/F2?#asahi · 2022-03-19 11:34
jannauWhyNotHugo: it's based on this arch linux arm image https://archlinuxarm.org/platforms/armv8/generic#asahi · 2022-03-19 10:34
jannauLucy[m]12: we have to validate https://github.com/AsahiLinux/alarm-PKGBUILDs/commit/c2459a0ae6fc04b7fe98bb04f10795248eca949b and submit it to arch linux arm. then you can at least rebuild all rust packages which uses jemalloc#asahi · 2022-03-19 10:22
jannaudcp seems to be stable from 12 beta to 12.3, at least the parts the linux driver uses#asahi · 2022-03-19 09:59
jannauyes, chainloading makes adding dcp support much less of trouble. it also requires m1n1 changes#asahi · 2022-03-19 09:57
jannauu-boot changes should be simple but depend on the devicetree bindings#asahi · 2022-03-19 09:56
jannaubrightness control and dpms are also not yet implemented in the dcp driver#asahi · 2022-03-19 09:56
jannauthere are two blockers for dcp: 1) device tree bindings for pre-mapped memory; 2) make u-boot not try to map the dcp iova#asahi · 2022-03-19 07:52
jannaumarcan: have you tested u-boot on a 4 or 8 tb nvme? silverocean[m] failure with a 4t nvme looks like the nvme doesn't come up in uboot#asahi · 2022-03-18 19:26
jannauopticron: there is https://github.com/AsahiLinux/asahi-installer/blob/main/tools/wipe-linux.sh as starting point#asahi · 2022-03-18 18:52
jannaualso access to the hw uart#asahi · 2022-03-18 17:28
jannau> 90% will have just one OS#asahi · 2022-03-18 17:27
jannautpw_rules: PR #3 is merged in https://github.com/AsahiLinux/u-boot/tree/releng/installer-release#asahi · 2022-03-18 17:24
jannautpw_rules: only efi is supported#asahi · 2022-03-18 17:23
jannaumarcan: ESP selection works fine, two old installations after updating m1n1-uboot to m1n1 and uboot-asahi and fresh desktop installation#asahi · 2022-03-17 20:20
jannauENODATA#asahi · 2022-03-17 20:17
jannaunot sure if that's the problem but it's something to start testing#asahi · 2022-03-17 20:16
jannauand it's a module in the current config#asahi · 2022-03-17 18:50
jannaumarcan: for the second install it has to be in the install binary. if it is missing u-boot will always boot from the 1st ESP#asahi · 2022-03-16 20:51
jannauno need to reinstall the 1st stage m1n1 then#asahi · 2022-03-16 19:32
jannauchosen.asahi,efi-system-partition is passed from the 1st stage forward to the second stage#asahi · 2022-03-16 19:31
jannauchosen.asahi,efi-system-partition is added to the dt mostly to allow u-boot to boot from the correct ESP#asahi · 2022-03-16 19:30
jannauchainload tell's the 1st stage m1n1 from where to load the second stage #asahi · 2022-03-14 21:42
jannaueven more cheating#asahi · 2022-03-14 21:42
jannauor use the binary from github actions and modify the installer's build.sh#asahi · 2022-03-14 21:28
jannaudon't we need nightly (unstable toolchain) anyway? at least that's what we have in the github workflow https://github.com/AsahiLinux/m1n1/blob/main/.github/workflows/build.yml#asahi · 2022-03-14 12:38
jannauor 'part uuid nvme 0:X' on the u-boot cmd line#asahi · 2022-03-14 12:37
jannaudoes busybox' mdev create /dev/disk/by-partuuid links? fdisk from util-linux prints it in expert mode#asahi · 2022-03-14 12:29
jannaublkid prints it as well#asahi · 2022-03-14 12:27
jannauj`ey: the kernel without initrd doesn't can handle filesystem UUIDs but gpt PARTUUIDs#asahi · 2022-03-13 09:49
jannaumps: it should be the PARTUUID and not the file system uuid#asahi · 2022-03-12 21:31
jannaumps: you probably need to append the esp partuuid and the chainload path as arguments#asahi · 2022-03-12 19:17
jannauok, looks reproducible on my end. I'll notify you after I've fixed it#asahi · 2022-03-12 19:15
jannauGlanzmann: how slow was dcp for you? slow as in the mouse pointer jumps 1-2 centimeter on the screen (14" display)? I hit bug today which resulted in that behavior after switching the display's refresh rate#asahi · 2022-03-12 14:50
jannauI wouldn't expect problems from dcp either given that there were no breaking changes from 12.0 beta to 12.2#asahi · 2022-03-12 14:47
jannaubut we will have to update to 12.3 for mac studio#asahi · 2022-03-12 14:46
jannausupported firmware is 12.1 for now. not a problem if you use the installer to install a stub partition