#asahi · 2022-10-19 19:11
jannauthe one in asahi-dev does. it will be updated soon-ish#asahi · 2022-10-19 19:10
jannauI think the m1n1 in the main asahi distro doesn't transfer the serial yet#asahi · 2022-10-16 18:26
jannau13" macbook pro might be a special case since the touchbar doesn't work in recovery, i.e. there is no way the user can correct a too low brightness#asahi · 2022-10-16 18:25
jannauI shut macos with brightness at barely readable and that did not stick#asahi · 2022-10-16 18:24
jannaunot sure it does anything at all for me and it certainly doesn't keep the macos brightness for me on the (m2 macbook pro)#asahi · 2022-10-16 18:13
jannauno, at whatever brightness It was used at macos. ~70% could be correct. I changed it to 0x006c0000 and haven't noticed much of difference on the next boot#asahi · 2022-10-16 18:07
jannauderzahl: no, at least not easily. you can read and mofy it from recovery though with the nvram command#asahi · 2022-10-16 18:06
jannau358.40 (divided by 100) could be correct#asahi · 2022-10-16 18:05
jannauraw value was for me 0x008c0000 (m2 macbook pro 13"). 35840 and 9175040 both are way to high for raw nits#asahi · 2022-10-16 18:00
jannauderzahl: there is a backlight-nits property in nvram but I'm not sure about the scale#asahi · 2022-10-16 17:45
jannauit is, the installer installs macos without issues into an existing (empty) apfs partition with further changes to the partition layout#asahi · 2022-10-16 17:18
jannauderzahl: yes, we currently only control the gpio to turn the backlight off and on#asahi · 2022-10-16 17:10
jannaualso the audio on devices with cs42l83 is not unsupported. it was previously working with a modified cs42l42 driver#asahi · 2022-10-16 17:08
jannaumps: I don't think you should leave but please keep in mind that what's working on your system with your effort is not equal to the state of the asahi distro#asahi · 2022-10-16 17:02
jannau-I #asahi · 2022-10-16 17:02
jannauand I working for months is a little bit of a stretch for the cs42l84#asahi · 2022-10-16 17:01
jannaumps: please remember that this is the asahi distro support channel, please do not claim that things are supported which are not yet in the distro kernel#asahi · 2022-10-16 16:59
jannaualso I think it would be much harder to fake the working gpu driver than implementing it with the live streams#asahi · 2022-10-16 16:58
jannauamateurece: it's currently not supported in the asahi distro but it will be soon#asahi · 2022-10-16 16:58
jannauthe opengl es parts are all in mesa / userspace#asahi · 2022-10-16 16:57
jannauderzahl: yes, it works if you use the right subset of software. you either missed the GPU code or you're expecting the wrong kind of gpu driver#asahi · 2022-10-16 06:37
jannauit misses a kernel config for the CS42L83 codec. we were using a patched cs42l42 previously#asahi · 2022-10-16 06:34
jannauderzahl: are you using the kernel from asahi-dev? that one has broken headphone jack audio for all m1 devices#asahi · 2022-10-15 15:30
jannauborisk: that's how apple advertises the ports. there isn't enough bandwidth anyway since the usb controller uses a single pcie 3.0 lane#asahi · 2022-10-15 15:28
jannauhttps://twitter.com/AsahiLinux/status/1581103659013722112#asahi · 2022-10-15 13:10
jannaudoes macos reveal how the ports/hubs are wired up? I would have expected that at least one port starts working and the other 3 are hooked up through the hub #asahi · 2022-10-15 13:08
jannauhas the lsusb output changed compared to without loaded firmware?#asahi · 2022-10-15 13:03
jannauborisk: any sign of life on the usb-c ports on the front?#asahi · 2022-10-15 08:13
jannauborisk: the package post install hook calls it. you can also run it manually but it just needs to run once per installed version#asahi · 2022-10-15 08:10
jannauborisk: well, if you ignore us it's hard to help you#asahi · 2022-10-15 08:09
jannauj`ey: the kernelchache should be a separate file and not in all_firmware.tar.gz#asahi · 2022-10-15 08:07
jannaumps: do they affect brcmfmac as well, I just saw mac80211 and assumed they affect only hw/drivers software mac#asahi · 2022-10-15 08:05
jannauborisk: have you already installed asahi-fwextract from the asahi-dev repository#asahi · 2022-10-13 21:44
jannauand macos or xcode ship per SoC plists with the event descriptions#asahi · 2022-10-13 21:42
jannauthere's https://github.com/dougallj/applecpu/blob/main/timer-hacks/bench.py#asahi · 2022-10-13 21:34
jannauif you have non public information see https://asahilinux.org/copyright/ first#asahi · 2022-10-13 21:31
jannauAdamTuby[m]: how would this go beyond current kernel PMU driver and the non secret event description inside macos/xcode?#asahi · 2022-10-13 19:16
jannauit is broken on multi-die devices, the kernel package in asahi-dev has broken headphone jack audio on all m1 devices#asahi · 2022-10-13 13:39
jannauafaik still needs to be prepared/loaded according to the kernel's boot protocol#asahi · 2022-10-13 13:34
jannauthere's no error. my first guess would be it doesn't load the initramfs#asahi · 2022-10-13 13:22
jannauthe interesting bit is how the only next boot from volume x is implemented. we could then have a boot picker in u-boot/grub/sd-boot... as well#asahi · 2022-10-13 13:15
jannaudefine available. there is no code which does that on linux side. but that's very likely how the boot picker implements that it. note that slecting a statup disk reboots the machine#asahi · 2022-10-13 13:11
jannauwhy do you want to boot into recovery? to select macos in the boot picker? it should be possible to select the startup disk from linux via nvram#asahi · 2022-10-12 22:05
jannaus/brave/dumb/#asahi · 2022-10-12 22:04
jannausorry, I wasn't paying attention before#asahi · 2022-10-12 22:03
jannauyou shouldn't use the same settings, the m2 air has just 2 woofer and 2 tweeters. if you're unlucky you've just driven your tweeters with the settings from the 2nd woofer pair of the macbook pro 14"/16".#asahi · 2022-10-12 21:21
jannautpw_rules: no idea, it could have been a while. it is a problem for sd card readers and similar devices without medium present. still not fixed u-boot upstream#asahi · 2022-10-12 21:10
jannaui.e not m2 specific#asahi · 2022-10-12 21:10
jannautpw_rules: just the usb-storage no medium/not ready issue which is iirc not fixed in the installer binaries#asahi · 2022-10-10 21:16
jannauno, with the minimal installtion you're at step 5 Post-installation. the root password is root