#
✕ nick:jannau
#asahi · 2024-08-05 18:11
jannaunicolas17: `echo performance > /sys/devices/system/cpu/cpufreq/policy4/scaling_governor` (policy0 for the efficiency cores) and `taskset -c 4-7 ...` / `taskset -c 0-3 ...`. that should be fine on devices with fans
#asahi · 2024-08-04 20:08
jannauI might have fixed modeset / swap races since 6.8.9
#asahi · 2024-08-04 20:07
jannauleio: the shutdown hang was fixed in asahi-6.9.4-1. a bug in the iommu code caused an oops on shutdown/reboot resulting on hanging
#asahi · 2024-08-04 20:02
jannauleio: which kernel version?
#asahi · 2024-08-04 19:56
jannaubut that's the only thing without any other effect
#asahi · 2024-08-04 19:55
jannauhmm, the only thing I see occasionally is a quick disconnect/reconnect after dpms off
#asahi · 2024-08-04 18:21
jannauI think it's working on m1 pro/max macbook pro and m2 pro mac mini. it was broken/not reliable in the beginning
#asahi · 2024-08-04 17:40
jannauit is? not known to me. Is this on m2 pro/max macbooks?
#asahi · 2024-08-04 11:48
jannaurunxiyu_: looking at the kernel log of a system running under m1n1's hypervisor
#asahi · 2024-08-03 17:25
jannauwhen using fedora / wpa_supplicant 2.11 try `dnf downgrade wpa_supplicant`
#asahi · 2024-08-03 13:58
jannaulooks like wpa_supplicant 2.11 triggers a NULL ptr dereference in our brcmfmac. worth holding the updating off until we can look into it
#asahi · 2024-07-28 13:06
jannau`sudo widevine-installer`
#asahi · 2024-07-27 10:52
jannauI think the current plan is to skip the firmware so probably not
#asahi · 2024-07-23 05:44
jannaugadnt: it might be possible to support custom modes but looking into that has no priority at all
#asahi · 2024-07-23 05:42
jannaugadnt: it is not possible to use other modes than offered by the driver. I wouldn't expect that the display dies when trying that. I would have expected that it recovers when it reverts to a supported mode
#asahi · 2024-07-09 17:08
jannautaniyama: possible missing for the type-c ports: xhci_plat_hcd, apple_dart, phy_apple_atc, i2c_pasemi_platform, tps6598x
#asahi · 2024-07-09 15:01
jannauCalandracas_: regarding asahi_clc? mesa has the same issue for other drivers, see https://gitlab.freedesktop.org/mesa/mesa/-/issues/9080 for reference. build issue should reproduce in upstream mesa
#asahi · 2024-07-03 07:39
jannauby deinstalling old kernel packages. `rpm -qa | grep kernel-16k` will list all installed versions
#asahi · 2024-07-02 19:55
jannauusb-c dp altmode or dp over thunderbolt is enough for 5120x2160 60Hz (4:4:4 10-bit) and DP supports dsc while hdmi 2.0 doesn't
#asahi · 2024-07-02 19:52
jannauon asahi the monitor might offer other modes. `cat /sys/class/drm/card*-HDMI-A-1/modes` or drm_info
#asahi · 2024-07-02 11:34
jannauno, that should be all
#asahi · 2024-07-02 11:31
jannauin /boot/loader/entries/
#asahi · 2024-07-02 11:31
jannauI don't think /etc/grub.d/10_linux is involved in creating the BLS loader entry files
#asahi · 2024-07-02 11:30
jannauadd "--force" to regenerate it if it exists. it probably is broken
#asahi · 2024-07-02 11:25
jannau`sudo dracut --kver 6.8.10-400.asahi.fc40.aarch64+16k`
#asahi · 2024-07-02 11:24
jannauDarkshadow44_m: there is a performance regression in the program creating the initramfs. It can several minutes instead of seconds. Once you got the system to boot `dracut --kver 6.8.10-400.asahi.fc40.aarch64+16k` should cretae the file and the default boot should work again
#asahi · 2024-07-02 11:09
jannauDarkshadow44_m: press escape immediately after you see "Booting: nvme 0". that should enter the grub menu and and you can select the old kernel
#asahi · 2024-07-02 11:08
jannauDarkshadow44_m: are you sure it can't find the new kernel and not just the initramfs for the new kernel
#asahi · 2024-07-02 11:07
jannauleio: 4k 144Hz 10-bit 4:4:4 works
#asahi · 2024-07-02 10:20
jannauI use https://tomverbeure.github.io/video_timings_calculator
#asahi · 2024-07-02 10:20
jannau4k 240Hz requires more bandwidth. number of pixels increases only by factor ~2.5
#asahi · 2024-07-02 06:49
jannauyes, that's dropped
#asahi · 2024-07-02 06:05
jannaublackMysticCat: Display with the largest resolution tested under Linux is the Dell 6k one. In general it should work in the same way as under macos and support the advertised resolutions. I'm still unsure if Apple has a trick to bridge the gap between DP HBR3 (32 gbps) and HDMI 2.1 (48 gbps) or if it has to rely on DSC for higher resolution, framerate, pixel format combinations
#asahi · 2024-06-25 21:37
jannaudur: wired microphone for the headset 3.5mm jack? if yes, does it work in macos? The integrated microphones for the laptops are currently not supported
#asahi · 2024-06-24 07:16
jannauif you feel strongly you can re-generate the old ones with `dracut --regenerate-all --force` but I wouldn't bother
#asahi · 2024-06-24 07:16
jannaumort_: after deleting the rescue kernel/initramfs you should have enough space, new initramfs will be smaller for new kernels
#asahi · 2024-06-24 06:50
jannaumort_: early adaptor woes: `dnf remove dracut-config-generic dracut-config-rescue` and you can delete the rescue kernel and initramfs
#asahi · 2024-06-23 15:03
jannauto my knowledge https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d7e9a9037de27b642d5a3edef7c69e2a2b460287 is still true, i.e. no 4K <> 16K page size interoperability in f2fs
#asahi · 2024-06-20 21:45
jannaunothing, that's inflated. I think we say 60-70 GB to be on the safe side but I believe for a fully unused macOS 45GB should be enough
#asahi · 2024-06-16 10:49
jannauvveapon: cura from fedora works on a m1 with 8gb and a 4k display. loading the first model takes a very long time (maybe 1-2 minutes, not sure what's going on) but works after that as expected
#asahi · 2024-06-15 10:22
jannauyes, but on macos so far only on the m3 macbook air. not sure where it's disabled for the m3 mbp
#asahi · 2024-06-15 10:05
jannauyes, just two display per port (I don't think single lane usb4 with dp altmode on 2 lanes is a thing). More displays would require DP MST support which apple silicon doesn't support
#asahi · 2024-06-15 10:00
jannaunot sure about 5k/6k, those come from apple. not sure what the actual limitation is but I suppose it is 6k, 60Hz, 10-bit RGB and not just the resolution
#asahi · 2024-06-15 09:40
jannauon m2* it makes sense to use dcpext since the dp2hdmi converter supports hdmi 2.1
#asahi · 2024-06-15 09:39
jannauyes, the not disabled dcp is used to drive thye dp2hdmi converter. they could do that since 5k were enough for hdmi 2.0
#asahi · 2024-06-15 09:34
jannauthere are no m2 ultra devices with internal display. if apple would release one (highly unlikely now) it would probably have/use dcp on one die
#asahi · 2024-06-15 09:33
jannauyes, internal display is always served by dcp (probably can't be switched)
#asahi · 2024-06-15 09:28
jannauM4 has 2 dcpext (from the ipad pro device tree)
#asahi · 2024-06-15 09:27
jannauyes, number of of dcpext is 1 for base M1/2/3, 2 for M1/2/3 Pro, 4 for M1/2/3 Max and 8 for M1/2 Ultra. M1 Ultra disables dcp on the second die, M2 Ultra on both dies
#asahi · 2024-06-15 09:26
jannauon m2 later dcp can be routed to the usb-c ports (in principle, FW might restrict it on laptops) and dcpext can be routed to the dp2hdmi converter

plus ›