#
✕ nick:Emantor
#asahi · 2023-11-07 10:43
EmantorThe mentality may still be a "we patch stuff anyway, lets just maintain our adjustments downstream"
#asahi · 2023-11-07 10:40
EmantorI guess cypress/infineon don't want to engage with mainline since they provide a 211 patch series for their chipsets in their driver releases: https://community.infineon.com/t5/Wi-Fi-Bluetooth-for-Linux/Cypress-Linux-WiFi-Driver-Release-FMAC-2023-09-01/td-p/492862
#asahi · 2023-11-07 10:36
EmantorCypress/Infineon seem to have no intrest whatsoever in upstreaming support for their wifi/bt chipsets. I have a Laird LWB5+ here where wifi using USB requires a clm blob to work and the downstream BT driver does some additional pokes to get BT to work…
#asahi · 2022-10-12 16:21
Emantorbecause they can, now get lost.
#asahi · 2021-10-18 18:00
Emantorsure :p
#asahi · 2021-10-18 17:54
EmantorGPU also scales up, multiple M1 & M1 Max variants.
#asahi · 2021-10-18 17:53
Emantor2249€ in germany
#asahi · 2021-10-18 17:38
EmantorHDR is coming slowly with the wayland color management extensions.
#asahi · 2021-10-18 17:36
EmantorThey fixed the keyboard, SD slot, HDMI, touchbar gone, more display controllers than current gen intel… not bad.
#asahi · 2021-10-18 17:20
EmantorM1 Max. lol.
#asahi · 2021-10-18 17:19
Emantorsweet
#asahi · 2021-09-28 17:54
Emantor10 tokens and I'll procrastinate giving you a washing machine :-)
#asahi · 2021-09-28 17:52
Emantorhands alyssa a procrastination token.
#asahi · 2021-09-16 09:03
EmantorLooks like one of the macOS updates pulled in a newer version and i was looking at an older dump, system-firmware-version = iBoot-6723.140.2 & firmware-version = iBoot-6723.120.36 is whats currently on my m1n1.
#asahi · 2021-09-16 08:50
Emantorsystem-firmware-version = iBoot-6723.120.36, firmware-version = b'iBoot-6723.120.36 for my mini.
#asahi · 2021-08-03 18:41
EmantorI have started to put together all necessary parts to boot m1 linux into a Yocto BSP (m1n1, u-boot, merged kernel branches). Next up I'll add an initramfs and than it should be good to go.
#asahi · 2021-06-16 11:01
EmantorI wouldn't even be remotely surprised if this is an i.MX8Q* issue…
#asahi · 2021-06-13 15:47
EmantorYep, setting this to %00 gets the chime back. So you'll want to run "nvram StartupMute=%01" in 1TR to disable it.
#asahi · 2021-06-13 15:45
EmantorI turned it off in macOS and haven't heard the chime since, my nvram value is %01
#asahi · 2021-06-13 15:44
Emantor" variable in nvram
#asahi · 2021-06-13 15:44
Emantorsven: There is a "StartupMute
#asahi · 2021-06-13 15:41
EmantorBut the last one points to the "Linux" partition, which in turn had the kernel replaced by m1n1.
#asahi · 2021-06-13 15:39
EmantorInterestingly I can't seem to finde the first two UUIDs in the colon separated boot-volumes list.
#asahi · 2021-06-13 15:30
EmantorLooks like the information is stored in the nvram as "boot-volume", not sure if thats the variable used by iBoot to device what to boot, but sounds like it.
#asahi · 2021-06-13 15:29
EmantorThe primary boot system should be configurable from 1TR.
#asahi · 2021-06-13 15:28
EmantorFor me, it always boots m1n1.
#asahi · 2021-06-13 15:26
Emantorwdym? AFAICS iBoot bundles the partition & kernel together.
#asahi · 2021-06-08 15:41
EmantorAnd enumeration of devices on the bus is done by the PCIe bus driver.
#asahi · 2021-06-08 15:41
Emantort have support before because usual nvme devices are connected to the PCIe bus.
#asahi · 2021-06-08 15:40
EmantorNVMe didn'
#asahi · 2021-06-08 12:06
Emantor*PCIe
#asahi · 2021-06-08 12:06
EmantorWith PCI XHCI on the Minis USB-A ports may also work.
#asahi · 2021-06-08 12:05
EmantorNo, I don't have any USB-C adapters here :D
#asahi · 2021-06-08 12:05
EmantorEh, MMU also needs to be disabled.
#asahi · 2021-06-08 12:03
Emantorpipcet[m]: I don't have a MBP, can't really without the hardware ;) But if ehci works you should be able to use a USB keyboard.
#asahi · 2021-06-08 12:01
EmantorEven when chainloading.
#asahi · 2021-06-08 12:01
Emantorpipcet[m]: It was the serial driver, disabling that lets simple FB work.
#asahi · 2021-06-08 09:52
Emantorpipcet[m]: can you gist your config somewhere? Really wondering why gadget/chainloading barebox from m1n1 is not working for me.
#asahi · 2021-06-08 08:42
Emantorkicad
#asahi · 2021-06-08 08:37
Emantorbgb: I did a small redesign of the Reclaimerlabs FUSB302 breakout board (https://www.tindie.com/products/reclaimerlabs/usb-c-power-delivery-phy-breakout-board/) which includes the SBU pins: https://github.com/Emantor/USB-PD-Breakout/tree/topic/separate_sbu_port
#asahi · 2021-06-08 08:22
Emantoryes, they are.
#asahi · 2021-06-08 08:21
EmantorNice :-)
#asahi · 2021-06-08 08:18
EmantorNow waiting for Digikey to send the FUSB302 and USB connectors.
#asahi · 2021-06-08 08:17
EmantorMy USB PD PCB arrived.
#asahi · 2021-06-07 20:17
EmantorAren't we all? :-)
#asahi · 2021-06-07 20:03
Emantorpipcet[m]: Yep, should work on boards with an nvme slot, which are the zii imx8mq boards AFAIK.
#asahi · 2021-06-07 19:18
Emantordebug apple logo == color stripped apple logo.
#asahi · 2021-06-07 19:18
EmantorRunning under the hypervisor gives me nice simplefb output with debug apple logo. Where does that even come from?
#asahi · 2021-06-07 19:15
Emantoryep, white apple logo smack down in the middle.
#asahi · 2021-06-07 19:13
EmantorYou are not alone. No m1n1 is running with a logo and correctly sets up the asahi logo.

plus ›