2022-03-27
00:02PatrickWozniak[m] has joined #asahi
00:03pat42smith has joined #asahi
00:06PatrickWozniak[m] is now known as pparker[m]
00:19creechy has joined #asahi
00:20BenFE has joined #asahi
00:21BenFEi forgot to tell y'all bc i was busy ricing but my install was a success! it's pretty insane how straightforward it is
00:25BenFEim not super familiar with linux audio, but i tried using the headphone jack and an external dac that i have, and i couldn't get any sound to come out
00:27creechy has quit [Ping timeout: 480 seconds]
00:33BenFE has quit [Quit: Konversation terminated!]
00:34BenFE has joined #asahi
00:36creechy has joined #asahi
00:36al3xtjames has quit [Quit: Ping timeout (120 seconds)]
00:37al3xtjames has joined #asahi
00:39pat42smithHello, all! I just installed Asahi on my Mini... thanks for all the hard work.
00:39kameks has joined #asahi
00:40pat42smithThere were a couple of issues. First, when installing, after doing the boot picker part and the security stuff, when the system rebooted, the display was just blank.
00:41pat42smithAfter an hour or so, I shutdown with the power button and then restarted, and it came up into Linux.
00:42chadmed has joined #asahi
00:42pat42smithSo something strange happened there, I don't know what. And I don't know if there was more configuration I missed hiding under that blankness.
00:42robinppat42smith: I had the same issue - I swapped mointors and it worked (I added an issue in the installer), but your saying it just came good after waiting a while ?
00:43pat42smithNo, I pressed and held the power button until the system shutdown, and then started the system again. That fixed the blankness.
00:44pat42smithBTW, this was on my second install. My first install, the same thing happened, but I realized it was because I was using DisplayPort. For the second install, I had HDMI all the time.
00:44robinppat42smith: i had tried restarting a few time (and booting from the boot picker) - but didn't have any luck with the Lenovo monitor i was trying to use.
00:45Adie[m]https://pastebin.com/raw/JgLzHvEU Not really relevant to asahi but it is stopping me from running the installer. Mystery error pops up when trying to run some commands.
00:46pat42smithrobinp: I'm not needing to use the boot picker - it boots into Asahi by default.
00:48pat42smithSecond issue: I have a 4K display, but the resolution being used is 1920x2160 - so everything is distorted.
00:49pat42smithIn "Display Configuration" under settings, it says the monitor only supports that one resolution. Weird.
00:55nathan has joined #asahi
00:56pat42smithchadmed: Is there any documentation on how to use or control simpledrm? I'm not finding any in my first Internet searches...
00:56nathan has left #asahi [WeeChat 3.4.1]
00:58BenFE has quit [Quit: Konversation terminated!]
01:00BenFE has joined #asahi
01:05user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
01:05chadmedyou cant control it, it just takes control of whatever framebuffer is set up by the platform firmware
01:05chadmedfor proper control over monitors and stuff you just have to wait for display controller support to land in linux-asahi
01:07BenFEfya for some reason restarting the pulseaudio daemon got the audio working on plasma kde ¯\_(ツ)_/¯
01:09user982492 has joined #asahi
01:10chadmedoh well yeah of course thats going to work, its just a UAC device and we have USB support
01:10pat42smithchadmed: Thanks. I'll wait, then.
01:12chadmedprobably something flaky in its udev module. try migrating to pipewire and pipewire-pulse
01:13chadmedpulse used to dislike my USB DAC on my amd64 machine fwiw, i dont think its a problem endemic to these machines
01:19kode54pulseaudio's current state of bluetooth is, SBC, and AAC/aptX/LDAC that are dependent on unmerged changes to gstreamer
01:19user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
01:20kode54and that popular AUR package for a bluetooth module for pulseaudio that imports the libraries directly, is no longer compatible
01:22BenFE-2 has joined #asahi
01:24BenFE has quit [Ping timeout: 480 seconds]
01:24BenFE-2 has quit []
01:25BenFE has joined #asahi
01:26BenFEand to think that when i woke up this morning i had no idea that linux would ever be bootable on my mac lol
01:28kode54I wondered why my own attempt to use virtual surround downmix on pipewire failed to work on Arch (on a not-asashi machine)
01:30BenFEim just curious to see how the linux laptop lifestyle will hold up with the daily college grind
01:31kode54oh, and if you use Go at all, it compiles like 5x as fast under Linux than macOS on the same machine
01:31BenFEim normally working in js/ts for full stack stuff, but my job this summer is probably gonna be mostly working with Go
01:34BenFEyeah a couple of my projects are electron apps, but i'm not really rushing to add support for arm64 linux lmao
01:36chadmedyeah wireplumber is a pseud, it tries to be way smarter than it actually is and almost always breaks something
01:36chadmedit just does not route the filter chain to the output because it thinks you dont "want" to do that
01:39BenFEdo you guys know if there are any packages that will decrease the brightness of the video stream (essentially put a black filter with variable opacity over the screen)? I once did that on Windows when it wouldn't talk to a monitor properly and it worked well enough to save my eyes.
01:42nicolas17BenFE: I think you can set the backlight brightness from macOS, and it will persist when you boot back to Linux
01:44creechy has quit [Ping timeout: 480 seconds]
01:45xqz has joined #asahi
01:50kode54like, nobody wants to have to plug in external hardware to replace unsupported internal functionality
01:54kode54well, by "fairly high" I mean, hobbyists should have no trouble getting one most of the time, since Digi-Key stocks several thousand at a time usually
02:10creechy has joined #asahi
02:18creechy has quit [Ping timeout: 480 seconds]
02:19PhilippvK has joined #asahi
02:22phiologe has quit [Ping timeout: 480 seconds]
02:24user982492 has joined #asahi
02:32Guest282 is now known as go4godvin
02:56eotdlt^ has joined #asahi
03:02creechy has joined #asahi
03:05artemist has joined #asahi
03:10THX1984 has quit [Quit: Leaving]
03:10creechy has quit [Ping timeout: 480 seconds]
03:22BenFE has quit [Quit: Konversation terminated!]
03:25kov has quit [Quit: Coyote finally caught me]
03:25kov has joined #asahi
03:27BenFE has joined #asahi
03:28chadmedhttps://github.com/AsahiLinux/docs/wiki/Partitioning-cheatsheet#do-not-use-the-disk-utility-application
03:29tpw_rulesyou could further shrink your macos partition, then run some live system to move the other partitions back
03:29tpw_rulesbut it's questionable if it would be less slow and painful than just deleting and recreating
03:32chadmedwell yeah but the fact that hes in disk utility suggests to me that hes trying to do stuff on macos
03:32xqz has quit [Ping timeout: 480 seconds]
03:33tpw_rulesdisk0s3 is the stub macos and disk0s4 is the EFI. you shouldn't run out of space on those
03:34chadmedoh ok right, the way you said it before sounded like you were trying to use the APFS stub as a rootfs
03:34tpw_rulesit looks like you already have free space, so just use gdisk and resize2fs to grow your root partition
03:34chadmedyou should be able to resize your rootfs from inside linux since you have 20gb of free space below it
03:36creechy has joined #asahi
03:37nicolas17 has quit [Ping timeout: 480 seconds]
03:44creechy has quit [Ping timeout: 480 seconds]
03:48creechy has joined #asahi
03:48psykose has quit [Ping timeout: 480 seconds]
03:49marvin24 has joined #asahi
03:53marvin24_ has quit [Ping timeout: 480 seconds]
03:54BenFE has quit [Quit: Textual IRC Client: www.textualapp.com]
04:01psykose has joined #asahi
04:05BenFE has joined #asahi
04:12BenFEis there a good walkthrough on resizing the root partition? im pretty clueless when it comes to linux filesystems
04:17tpw_rulesthen n to make a new one, put in the exact same start sector it lists there (110352390), then accept the default end and type
04:18kameks has quit [Ping timeout: 480 seconds]
04:20creechy has quit [Ping timeout: 480 seconds]
04:21tpw_rulesok looks good. hit w to save it, then run the command resize2fs /dev/nvme0n1p5 to expand your / to fill it
04:21romain_ has joined #asahi
04:21romain_ is now known as rominou66
04:24BenFE has quit [Quit: Konversation terminated!]
04:25BenFE has joined #asahi
04:29tpw_rulesyeah i thought there was a script that automatically expanded the partition and resized it on boot
04:30BenFEim now remembering that i did something something similar on AWS, but it was a while ago and i just cluelessly followed a guide
04:32BenFE has quit [Quit: Konversation terminated!]
04:56user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
05:00Ry_Darcy has joined #asahi
05:02rominou66 has quit [Remote host closed the connection]
05:02rominou66 has joined #asahi
05:07nicolas17 has joined #asahi
05:10user982492 has joined #asahi
05:10nicolas17 has quit []
05:11juancri has quit [Quit: WeeChat 3.4.1]
05:13ciggi_ has quit [Read error: Connection reset by peer]
05:14creechy has joined #asahi
05:18ciggi has joined #asahi
06:03CarlosDiazPlaza[m] has joined #asahi
06:04CarlosDiazPlaza[m] is now known as Carlitos[m]
06:19creechy has quit [Ping timeout: 480 seconds]
06:35user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
06:43leah2 has quit [Ping timeout: 480 seconds]
06:48ciggi has quit [Ping timeout: 480 seconds]
07:19romain_ has joined #asahi
07:25rominou66 has quit [Ping timeout: 480 seconds]
07:35Guest288 is now known as Skirmisher[m]
07:41user982492 has joined #asahi
07:42romain_ has quit [Ping timeout: 480 seconds]
07:46pat42smith has quit [Remote host closed the connection]
08:05leah2 has joined #asahi
08:17LinuxM1 has joined #asahi
08:19LinuxM1hello, the battery icon has disappeared, it is not detected. i think it's a bug. how can i restore the vision of the battery icon? I went to the tray settings and put the check mark on "always visible" but it is not shown
08:20hir0pro has joined #asahi
08:23LinuxM1I think it is not detected at the hardware level. perhaps resulting from some update or installation of programs. Until yesterday it was shown correctly, then I remember that it had reached critical level and I then clicked on the notification to remove that message. from that moment it is no longer shown
08:25leah2 has quit [Ping timeout: 480 seconds]
08:25j`eycat /sys/class/power_supply/macsmc-battery/capacity (that path is slightly wrong, but im doing it from memory)
08:26LinuxM1I can't always give the command to check the battery status. at the moment it gives me the value "69"
08:33LinuxM1 has quit [Quit: Leaving]
08:35Skirmisheroh, okay (intentional channel switch?)
08:36SkirmisherI'm off for the night but will be looking at this again tomorrow
08:37LinuxM1 has joined #asahi
08:37SkirmisherI see, I just saw it mentioned in the "open OS ecosystem" wiki page
08:37Skirmisheranyway, night
08:38Ry_Darcy has quit [Remote host closed the connection]
08:43doggkruse has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
08:44leah2 has joined #asahi
08:55marcanfor people with HDMI issues or who want to change the boot time resolution, I have a test thing here: https://github.com/AsahiLinux/m1n1/issues/159#issuecomment-1079882919
08:59kameks has joined #asahi
09:03hir0pro has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
09:11marcanthe good news is doing a DCP init is very fast, and setting the mode to the current mode does not cause a cycle/flicker, and we don't reinit the FB when the mode did not change
09:11hir0pro has joined #asahi
09:11marcanso that means I can ship something to update-m1n1 to pull the display= config from /etc/m1n1.conf or whatever, and ship a default config file with "display=auto" in it
09:11marcanand that will fix the display in stage 2 for people with issues in stage 1, including bad mode selection, and hopefully not really affect anyone else
09:14user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
09:25jannaumarcan: argh, I started working on the same functionality, I have a proptoype for allocating a larger framebuffer. it will be too small for 4k on the mac mini
09:28marcando we have (unmapped) reserved VRAM for larger FBs, or do we need to steal some of main RAM?
09:30marcanI guess the sane thing to do is to give up on the "search the DART for the framebuffer" business and just carve our own FB off the top of RAM unconditionally, though it would be nice to somehow figure out how to unmap those leftover IOVAs so they don't pollute the DART unnecessarily
09:36Glanzmann has joined #asahi
09:37Glanzmannjannau: If you have the patch with the bigger vram, please send it to me. Ry Darcy would like to try it.
09:38marcanGlanzmann: you really need to stop asking people for patches that aren't done yet, especially when we literally just had a merge conflict here...
09:40jannauI haven't checked yet, it seemed so obvious that it should be the frame buffer that I ever investigated
09:41marcanso that's easy then, make display.c use that if it's available and the new mode fits in it, otherwise allocate, map, and clear a new one before the swap, pulling from the top of RAM (which nothing else does, so that should be safe)
09:43marcanactually we might want to just outright mutate the ADT at that point, and point /vram at the new location, and just accept the loss of the old vram
09:43Glanzmannmarcan: I was not asking for a broken patch, I asked jannau for the patch once he finished, I litterary just send you an email about it 10 minutes ago.
09:50Tano70 has joined #asahi
10:09m6wiq has joined #asahi
10:22eotdlt^ has quit [Remote host closed the connection]
10:44bluetail[m]can I upgrade to macOS 12.3 and will asahi still work?
10:49marcanthe system is designed to be backwards compatible, but I can't guarantee we won't run into a corner case because obviously we can't talk to apple directly about what the expectations are
10:50marcannot unless something goes wrong with the stub which would be very unlikely since it doesn't really try to do anything complicated
10:51marcanuntil either the next machines are released or we decide to upgrade for some important reason
10:52Tano70 has quit [Quit: Leaving]
10:54m6wiq has quit []
11:04Sobek[m]Also, can you update the stage 2 stub to using more recent firmware etc, or must stage 1 and 2 be based off the same macOS version ?
11:07Sobek[m]Isn't there a firmware bundle that's derived from a specific version of macOS (for ABI reasons)
11:11chadmedthe installer just gets the fw blobs from where macos keeps them and writes them to the ESP. we arent allowed to redistribute them ourselves
11:12Sobek[m](It grabs them by streaming the recovery bundle, so as to be independent from the macOS version on the computer too)
11:13Glanzmann has quit [Quit: leaving]
11:13Sobek[m]If at some point you need to update to the firmware bundle from say macOS 12.5 ou 13.0, will you switch only new installation and keep supporting the old installs ? Or will you write a utility that from linux streams the new OS, extracts the rights bits and dumps them at the firmware location ?
11:30kameks has quit [Ping timeout: 480 seconds]
11:39sjbtrn[m] has joined #asahi
11:50pparker[m]Hey all, I just installed the desktop version on my Mac mini m1. But the screen shows now "no signal" on my Xiaomi Mi Curved 34° monitor. It works fine on my tv screen. Any idea why?
11:54pparker[m]Oh great. I will do that. Thank you!
12:03bluetail[m]<j`ey> "pparker: https://github.com/..." <- Can we have a monitor compatibility sheet?
12:04chadmedconsidering this is not going to be a problem for much longer i dont think its worth the effort
12:04bluetail[m]You are right but I still assume some monitors are inherently NOT fully compatible with m1 macs
12:04bluetail[m]or in general with macs
12:05bluetail[m]ok...
12:05bluetail[m]how does it work?
12:05chadmedHDMI and DP are very standard interfaces. once we have full control over the DCP and framebuffer memory from linux this will literally just not ever be a problem
12:06chadmedand before loading the kernel, m1n1 will init the DCP at whatever mode we give it from configuration
12:06chadmedlike the only reason this is a problem is because we cant yet control the DCP and rely on whatever iBoot is doing to it, which turns out to be wrong sometimes
12:26hir0pro has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
12:28userll has joined #asahi
12:38pparker[m]j`ey: hm no it doesn't work
12:38pparker[m]tried it with echo display=1920x1080@59.94 >> /boot/efi/m1n1/boot.bin and echo display=1920x1080 >> /boot/efi/m1n1/boot.bin
12:38pparker[m]both didn't work
12:42pparker[m]cd /boot/efi/m1n1... (full message at https://matrix.org/_matrix/media/r0/download/matrix.org/MdIOACwssFgDozyCGqddeHIX)
12:42m6wiq has joined #asahi
12:47pparker[m]ok now I tired all variations. also the first one without "echo" doesn't work
12:47pparker[m]cp boot_display-test.bin boot.bin
12:47pparker[m]reboot
12:47pparker[m]s/tired/tried/
12:50hir0pro has joined #asahi
13:01bluetail[m]whats the output of
13:01bluetail[m]`cat /boot/efi/m1n1/boot.bin`
13:01bluetail[m]`cat /boot/efi/m1n1/boot.bin`
13:01bluetail[m](trying to help, not having asahi installed myself :D)
13:08chadmed has quit [Remote host closed the connection]
13:09pparker[m]It's just 1,5mb of data and my ssh connection freezes after running cat over the binary :D
13:12bluetail[m]pparker[m]: wait....
13:12bluetail[m]I thought you are writing into those bin files
13:12bluetail[m]I mean
13:13bluetail[m]doesnt it say write to the bin file this content: `display=1920x1080@59.94`
13:13bluetail[m]* bin file a new line with this content:
13:19hir0pro has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
13:23LinuxM1 has quit [Read error: Connection reset by peer]
13:24Radical[m] has joined #asahi
13:27Stary has quit [Quit: ZNC - http://znc.in]
13:32hir0pro has joined #asahi
13:33hir0pro has quit []
13:33Stary has joined #asahi
13:34hir0pro has joined #asahi
13:36qiuren[m]<bluetail[m]> "doesnt it say write to the bin..." <- Exactly. It seems that the last section of the file is configuration. Such string append to `boot.bin` appears in some places of Asahi docs.
13:38qiuren[m]> <@bluetail:matrix.org> doesnt it say write to the bin file a new line with this content: `display=1920x1080@59.94`
13:38qiuren[m] * Exactly. It seems that the last section of the file is configuration. Such config string append to `*.bin` appears in some places of Asahi docs.
13:42___nick___ has joined #asahi
13:45qiuren[m]So I think Sobek's comment is better. pparker you can use: `tail /boot/efi/m1n1/boot.bin` and see if any other configuration is already added into it.
13:52___nick___ has quit []
13:53___nick___ has joined #asahi
14:00bluetail[m]`The tail command displays, by default, the last 10 lines of a text file in Linux.` I see
14:12BrenoMaia[m] has joined #asahi
14:24kalios[m] has joined #asahi
14:26mr_zomka has joined #asahi
14:26kalios[m]The error I got was `Failed to run process: diskutil apfs resizeContainer disk0s2 218175111168`
14:26mr_zomkaHi. Would Asahi Linux have support for emulating amd64 apps like Rosetta2 on macOS in the near future?
14:26* kalios[m]posted a file: (46KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/xwofuVBVkPtXWEknRtLaNhfb/installer.log >
14:27kalios[m]I got a bunch of warnings about overallocation. And then `error: orphan/invalid physical extent (1677613)`
14:27tpw_ruleskalios[m]: ok, you have APFS corruption. reboot into recovery mode, then run disk utility's first aid
14:28tpw_rulesmacOS did at some point. but the installer checks for corruption before it resizes the disk
14:29tpw_rulesa bug in apple's APFS driver. there have been a worrying amount of people coming here to report this
14:29tpw_rulesi feel like everyone should put a first aid check on their calendar every month or so...
14:37opticronmr_zomka, rosetta2 isn't a magic solution that makes everything run like native code, there is still overhead there
14:38bluetail[m]something runs in rosetta2 faster though :D
14:38bluetail[m]I think for Adobe it did
14:38kalios[m]tpw_rules: ran the disk utility. didn't pick anything up. am going to try run the installer again
14:39opticronbluetail[m], that sounds like a poorly optimized native build (or they were using a bunch of things available in x86 that they don't have or haven't ported over to the AArch64 build yet)
14:39kalios[m]I only had one volume to check. well, two ... I think one was a system volume? anyway I checked both. it ended with `everything appears to be ok`
14:49creechy has joined #asahi
14:49tpw_ruleswhat does "diskutil list" say? you should be able to open safari and paste it somewhere
14:50kalios[m]Not sure I understand. I can open safari but where do I paste that? Is it a terminal command?
14:53___nick___ has quit []
14:55___nick___ has joined #asahi
14:55Radical[m]Hey, how do you connect to the internet on the minimal version? I tried iwd but got errors trying it
14:57Radical[m]ieee80211 phy0: brcmf_p2p_send_action_frame: Unkown Frame: category 0x5, action 0x4
14:58___nick___ has quit []
14:59Radical[m]I’m apparently "connected" but i have no network access
14:59hir0pro has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
15:00___nick___ has joined #asahi
15:01Radical[m]Trying to ping any ip’s on my local network i get "network is unreachable" and pinging anything outside my network just says "Could not resolve host"
15:16m6wiq has quit []
15:20amarioguy has joined #asahi
15:25kita99 has joined #asahi
15:26LinuxM1 has joined #asahi
15:26Radical[m]Ah alright
15:26Radical[m]I see it says disabled
15:26Radical[m]Thanks
15:30leo60228- has joined #asahi
15:30leo60228 has quit [Ping timeout: 480 seconds]
15:31the_lanetly_052___ has quit []
15:37hir0pro has joined #asahi
15:40amarioguy has quit [Ping timeout: 480 seconds]
15:43meowcat285[m]1<EvadingEvasions[m]> "16k page issue." <- Well, whenever chromium gets fixed, it probably wont take too long
16:11creechy has quit [Quit: WeeChat 3.4]
16:11creechy has joined #asahi
16:11creechy has quit []
16:12creechy has joined #asahi
16:13johey has quit [Ping timeout: 480 seconds]
16:16user982492 has joined #asahi
16:20creechy has quit [Quit: WeeChat 3.4]
16:20creechy has joined #asahi
16:21johey has joined #asahi
16:26creechy has quit [Quit: WeeChat 3.4]
16:37kreechy has joined #asahi
16:43THX1984 has joined #asahi
16:47user982492 has quit [Quit: Textual IRC Client: www.textualapp.com]
16:55M80h[m] has joined #asahi
17:05tomtastic has quit [Quit: ZNC - https://znc.in]
17:09hir0pro has quit [Quit: Textual IRC Client: www.textualapp.com]
17:10tomtastic has joined #asahi
17:17pparker[m]VinDuv: Hey, patlux from GitHub here. How do I restore the boot.bin when I can't boot into the system? Can I somehow mount the boot partition when I boot into macOS?
17:19VinDuvFrom macOS open a Terminal, run diskutil list, and find the identifier (disk0sX) of the EFI - ASAHI partition
17:20VinDuvThen run sudo diskutil mount disk0sX and the partition will show on the desktop (and in /Volumes)
17:23pparker[m]Thanks! Works great :)
17:28user982492 has joined #asahi
17:33doggkruse has joined #asahi
17:46armin has joined #asahi
17:50dwib has joined #asahi
17:51dwibHi there, i am planning on getting a new laptop soon, and I was thinking of getting a mac but I really want to be able to use Linux. I'm wondering if Asahi would be viable? Like would it be a relatively seamless transition for me from using arch, and are there limitations?
17:52j`eydwib: look at the what works / what doesnt list https://asahilinux.org/2022/03/asahi-linux-alpha-release/
17:54m6wiq has joined #asahi
17:54dwib has quit []
18:00user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
18:00Glanzmann has joined #asahi
18:05Tano70 has joined #asahi
18:07Glanzmannjannau: I had to try your display_fb_alloc branch. So I updated my stub to 12.3 because it was still 12.1 on the mini. But I have different results: So hdmi hotplug (turn monitor off/on again never gives me the picture back) And with your branch while 2k works for m1n1 and u-boot, as soon as the kernel boots, i get a black screen on the mini. But I can log in remotely. Framebuffer module is loaded:
18:07Glanzmannsimple-framebuffer be3a18000.framebuffer: [drm] fb0: simpledrmdrmfb frame buffer device. I only tied the 2k eizo with and without display=2560x1440.
18:08Glanzmannjannau: And since you mentioned that reinitializing give issue, I tried reboots as well as cold boots. Same result for me.
18:27the_lanetly_052 has quit [Ping timeout: 480 seconds]
18:30jannauGlanzmann: I can confirm the black linux screen. that seems to be unrelated to my changes. I see that with the stage 1 m1n1 from the installer (not recent) and linux.py
18:31VinDuvSkirmisher: I was wondering, does macOS correctly detect the resolutions supported by your monitor?
18:33mr_zomka has quit [Quit: Konversation terminated!]
18:34Glanzmannjannau: I see. I also used m1n1-rust.bin which I build myself but is a little bit older: (22th march). I'll upgrade to latest and retry. Thank you for confirming.
18:46_andy_t_ has quit [Quit: https://quassel-irc.org - Chat comfortably. Anywhere.]
18:47_andy_t_ has joined #asahi
18:47THX1984 has quit [Quit: Be nice to others]
18:50SkirmisherVinDuv: yeah, it works fine under macOS. can't adjust the brightness over USB like you could in 10.4 though lmao
18:51Skirmisher(I have no idea when they removed that, I was never a home OS X user until I started getting into PowerPC Macs)
18:53Skirmisherupdated my GH comment to clarify
18:53Tano70 has quit [Quit: Leaving]
18:57user982492 has joined #asahi
19:01fncraft[m]is there any way to fix audio permanently? It is inconvenient to switch to input then input+output every time
19:01ktz_[m]Guys ever since this https://github.com/AsahiLinux/docs/wiki/_compare/53f75b7a76a6f1c3a562ccab91617745be7da5ae I'm having a really bad time navigating the wiki, please consider re-populating the sidebar
19:04ktz_[m]I'm missing relevant content in the sidebar, most of the times I don't know which page might contain any relevant info to what I'm searching so I'm glancing through the contents and open pages that could contain some info
19:07ktz_[m]Yes I know that but they're always folded by default and you totally get what this commit tried to sort out (which wasn't necessary at this point)
19:08ktz_[m]This doesn't have to do with usability of course, please don't get me wrong, its just a QOL change for people visiting the wiki
19:08serge133[m] has joined #asahi
19:09colemickens has joined #asahi
19:09ktz_[m]Not a personal thing, just populate the entries with pages you think people will be finding useful, the prime ones
19:09colemickensIs there any reason to hold out hope that M2-powered iPads might be able to run Asahi?
19:11fncraft[m]colemickens: i might be wrong but iirc iPad’s are much more locked down than macs so that probably isn’t possible
19:13colemickenstpw_rules: 👋. I did assume as much, it was a very speculative question. Some things about the M1 made it seem like they had maybe intentionally-not made it hard to run linux on the MBP, so I wondered if there was any speculation/hope/code hints that similar flexibility would be present on the iPads. But I also historically know that what @fncraft has been true.
19:14j`eyktz_[m]: im not trying to be contrary, just trying to understand. the sidebar has: Project related:, Platform documentation:, For users:, For developers:, each with multiple links
19:15colemickensI guess I imagine that a M2 Macbook and M2 iPad are built and boot pretty similarly. I certainly understand they still get to control the initial bootloader, etc.
19:16colemickens* bootloader, etc and might make different business decisions per-sku, etc.
19:16amarioguy has joined #asahi
19:16colemickensAnyway, it's the answer I anticipated, but thought I'd ask :)
19:18colemickensIt wouldn't surprise me if they just see or hope to hold onto marketing the Mac lineup as more dev-oriented still compared to super-locked-down/secure vibes of iPad/iPhones.
19:18fncraft[m]btw is the gpu driver still being worked on? The last commit on github repo is way too old
19:18colemickens* of iPad/iPhones. (though, I also understand allowing Asahi doesn't have to mean compromising security)
19:18ktz_[m]j`ey: https://github.com/AsahiLinux/docs/wiki/Partitioning-cheatsheet... (full message at https://matrix.org/_matrix/media/r0/download/matrix.org/kzqhkdvRgzymQsuWRxhxpuZP)
19:20ktz_[m]Also sorry for being vague in my description j`ey I just didn't want to point to specifics that I'm personally interested rather than leaving it out to you to populate it what you think would be more relevant to everyone
19:20colemickensktz_: also there are related mesa repos with much more recent commits, but not sure if its appropriate to link those around willy-nilly
19:20kita99 has quit []
19:20colemickenss/ktz_/fncraft/
19:23Glanzmannktz_[m]: I also missed a few entries, however what you can do is clonening the git reposistory and open the md files directly.
19:25ktz_[m]j`ey: by the way I in the logs you mentioning some user named saxung running voidlinux, is he still around? I'll try running void as well once I figure my way around good enough and I was wondering if he got any resources he could share
19:29mpsGlanzmann: I would like to add url of your video about setting machine with asahi installer to my guide
19:30ktz_[m]hey mps what is this guide for if I might ask? is it relevant to the draft you wrote about alpine?
19:34ktz_[m]By the way I think you forgot to fetch the fwupdate in the script, if the link is any relevant
19:34fncraft[m]<colemickens> "ktz_: also there are related..." <- yeah i noticed that
19:35Glanzmannmps: So I have a few videos. This is the latest. But marcan improved the installer a lot since I recorded it: https://tg.st/u/m1debian.mp4
19:36ktz_[m]@mps great, thanks for updating it already I had a hard time getting to finish the installation properly on my own but I got a bit more into things and I might be able to do it from scratch on my own
19:36maxung[m]<ktz_[m]> "j`ey: by the way I in the logs..." <- ktz_: i mentioned in another reply already, but i dont have many resources to share at this point
19:36Glanzmannktz_[m]: Btw, but I often do with the wiki if I want to see what's new I run git log -p | less -R -i -p "^commit" # use 'n' to browse
19:36mpsGlanzmann: this is about debian, I watched it today, but iirc you had one about generic install
19:37maxung[m]ktz_: i installed asahi, booted a debian live stick, installed the void tarball onto the asahi partition (wiping it basically) and then compiled the kernel + m1n1 to boot void directly (because I had problems with the efi setup and grub)
19:38ktz_[m]maxung[m]: No problem, I think just compiling the kernel is that part that I'm not familiar with yet but I'll do it as well eventually.. I'll need to put asahi and zfs into the same kernel to get zfsbootmenu working and have root on zfs
19:39Glanzmannjannau: I see, strange. I'll make you a video and upload it, just in case that I don't miss something.
19:43Glanzmannmps: If you want I can make you a script which creates an asahi installer image for alpine. Do you have a link for the kernel config and the rootf?
19:43mpsGlanzmann: this will be for end users who like to watch video to get idea how it works, not as official guide
19:44ktz_[m]maxung[m]: Okay, I guess I'll be finished with installing alpine as my basic OS today, have myself setup and then try more from there
19:45maxung[m]Maybe I will try to make a script and let the experts here have a look, as for now (other then possibly kernel development) I'm not so much interested yet as a daily driver or something
19:45mpsktz_[m]: I prepared image which could be 'dd'-ed to usb disk, no hassle with script if some users wants simpler solution
19:46mpsGlanzmann: and if you want to make script which add alpine to installer I'm not against this
19:47maxung[m]mps: mps: I wanted to ask, does alpine use a different kernel format? In your script it has an apk ending?
19:47ktz_[m]mps: Yeap I used the image couple of times already, I couldn't figure out a couple of steps properly after booting from the usb but there are plenty of resources and I think I'll sort it out
19:47Glanzmannmps: Maybe I find some time to it tomorrow. Does alpine execute a /etc/rc.local if it is there?
19:49mpsI worked on draft guide and disk image so didn't had time to merge linux-asahi kernel to alpine repo, have to clean it somewhat
19:51mpsktz_[m]: it must be built as separate package, we (alpine) don't like big patches to kernels
19:52ktz_[m]there are zfs packages available already I just thought they wouldn't be combatible cause its a different kernel or am I wrong?
19:52mpsktz_[m]: you have to install linux-asahi-dev (which I didn't uploaded yet) and then build external modules
19:52Skirmishermaxung[m], ktz_[m]: I'm working on packaging + a live image for void on M1 right now. almost done with the former, only known issue rn is that USB doesn't work in the initrd for some reason. then I'll just glue it all together in void-mklive
19:53mpsktz_[m]: zfs pkg in alpine works only with linux-lts pkg, for other kernels it must be rebuilt by end users
19:53jannauGlanzmann: 4k is still roughly truncated after 11 / 15 of the height. which is good match for the preallocated fb size of 0x1500000
19:54ktz_[m]mps: Okay, I'll get back to making my installation boot properly and I'll try building it, thanks
19:55Glanzmannjannau: Maybe, I did something really stupid. Maybe, but only maybe I had the dtbs of your dcp branch ... I'm now rebuilding everything from scratch, just to be safe and try again.
19:58THX1984 has joined #asahi
20:00maxung[m]Skirmisher: I had to specify some kernel modules in the dracut configuration, because not all required kernel modules are built-in
20:02Glanzmannjannau: So turns out, I did something stupid. So with your m1n1 branch and the right dtb. I get 2k resolution without specifying the resolution (normally I get the default 1080p). But hdmi hotplug still does not work for me ( I tested by turning my monitor off and on again while I'm in X).
20:05Skirmishermaxung[m]: I mean in the dracut shell, for boot failures or if you invoke it manually. I already added the modules from the config in asahi-scripts but apparently that's not all the necessary ones, I looked at `lsmod` in the alarm initcpio shell and there are some extras
20:06Skirmishereither that or dracut is blowing up in the middle just because some of the modules are built in and don't exist, and it doesn't add the rest
20:06Skirmisherwish there was a way to make kmods optional, but oh well
20:07Skirmishermaxung[m]: https://github.com/AsahiLinux/asahi-scripts/blob/main/initcpio/install/asahi
20:07maxung[m]i compared the modules load by the asahi-script and which are builtin and these were the ones
20:07Skirmisheranyway I probably just solved my own problem :)
20:07___nick___ has quit [Ping timeout: 480 seconds]
20:07m6wiq has quit []
20:09Skirmisherthat's what I did already, but thank you
20:11Glanzmannmarcan[m]: With the latest changes from the m1n1 branch, the right mode for my eizo is selected automatically (2560x1440).
20:11bluetail[m]then*
20:16amarioguy has quit [Ping timeout: 480 seconds]
20:20Glanzmannmarcan[m]: I now also installed the newest m1n1 in stage1 and with that, the resolution is again wrong 1080p 'adding display=auto to stage2' did not help, but settings the resolution explicitly works: echo display=2560x1440 >> /boot/efi/m1n1/boot.bin
20:35fly_0ut[m] has joined #asahi
20:51LinuxM1 has quit [Quit: Leaving]
21:03Tano70 has joined #asahi
21:20LukeTheWalker has joined #asahi
21:31Tano70 has quit [Quit: Leaving]
21:50LukeTheWalker has quit [Remote host closed the connection]
21:52nicolas17 has joined #asahi
21:54user982492 has quit [Quit: My MacBook has gone to sleep. ZZZzzz…]
22:00yrlf has quit [Quit: The Lounge - https://thelounge.chat]
22:01amarioguy has joined #asahi
22:18yrlf has joined #asahi
22:22SangLe has joined #asahi
22:23SangLe has quit []
22:29psydroid[m]1I think audio was mentioned as not working well or at all in the latest report
22:29kode54I think maybe the corruption might also happen from kernel panics and improper disk cleanup afterward
22:51pequalsnp[m] has joined #asahi
22:56userll has quit [Remote host closed the connection]
22:58THX1984 has quit [Quit: Be nice to others]
23:14ktz_[m]The rest should be working out of the box tho, usbs etc. I think the audio jack is working for out only if you want to use that
23:18MajorBiscuit has joined #asahi
23:20pat42smith has joined #asahi
23:21Ata[m] has joined #asahi
23:28* Ata[m]uploaded an image: (525KiB) < https://matrix.org/_matrix/media/r0/download/matrix.org/YYqMUIMprkWLUcXTJsZflYHF/Ekran%20Resmi%202022-03-28%2002.28.30.png >