#
…

2022-06-29

03:43L1Q has quit [Quit: Leaving]
06:24m1n1m4[m]no worries, thanks for the answers!
06:26m1n1m4[m]<mps> "and I have this https://arvanta..." <- i was looking recently for this link on this list of links of your site https://arvanta.net/alpine/ , and could not find it.
06:26m1n1m4[m]thanks again for your help!
06:41m1n1m4[m]oh, sorry it is there, "setting XFCE4 in qemu VM on Alpine Linux 3.12-stable" ...
06:42m1n1m4[m]i see by the notes that i missed some steps.... Thanks again
07:09m1n1m4[m]<m1n1m4[m]> "i see by the notes that i missed..." <- By running setup-xorg-base, i get the OK message and the byte count of the transfer, but after i get these two errors:
07:09m1n1m4[m]*rc-update service 'mdev' is not in the runlevel 'sysinit'
07:10m1n1m4[m]*rc-service: exec format error
07:11m1n1m4[m]Do you want me to debug it deeper? Is there a log? Thanks
07:12m1n1m4[m]Another question, how do i get dd to show progress on alpine-asahi?
07:40mpsm1n1m4[m]: alpine basic tools are busybox applets, so dd is simple one and doesn't have progress option
07:41mpsre: exec format error, looks like rc-service not from aarch64 but other architecture
07:42mpsm1n1m4[m]: there is https://dev.alpinelinux.org/~mps/m1/install-nvme.sh script which you can follow to install alpine on nvme or any other disk
07:43mpsbut it would be better if you follow this guide https://arvanta.net/alpine/install-alpine-m1/
07:53mpsm1n1m4[m]: also https://wiki.alpinelinux.org/wiki/Xfce if it is not outdated
07:56j`eyalso run: file $(which rc-service)
08:41m1n1m4[m]<mps> "m1n1m4!: also https://wiki...." <- i confirm, got a clean install and i have XFCE4 running!
08:44m1n1m4[m]BUT... i had to uninstall libudev-zero and re-run the setup-xorg-base, then all went smooth.
08:45m1n1m4[m]Second thing: was using iwd for wifi at install with internet and i think that the setup of xfce changed it to some sort of network manager that i do not have control. How can i change it back to iwd?
08:45m1n1m4[m]Thanks again!!!
08:50mpsI guess lightdm requires udev
08:51m1n1m4[m]UPDATE: after checking the issues of running network manager over iwd here: ( https://wiki.alpinelinux.org/wiki/NetworkManager ) i think it is better to stop using iwd and just configure the wpa_s etc...
08:51mpsah, actually setup-xorg-base require udev
08:51mpsiwd is better on M1
08:51m1n1m4[m]mps: yes, and udev is not compatible with libudev-zero
08:52mpsyou can have wpa_s and iwd installed at same time, and chose which one to use
08:53m1n1m4[m]mps: Perfect, i just want iwd, simple and if possible purge wpa_s ...
08:53mpsand you can remove network manager
08:53mpsNM is a mess
08:53m1n1m4[m]yes, please, how do i do that?
08:53m1n1m4[m]mps: exactly my experience also!
08:54mpsfor iwd there is iwgtk pkg, gui
08:54mpsapk del $network_manager_pkg_name
08:54m1n1m4[m]cool but i have to disable the networkmanager service first no?
08:55mpsapk del network-manager-applet
08:56mpsapk info | grep network-manager
08:56mpsand remove all them
08:56mpsrc-update will show services which runs on boot
08:57m1n1m4[m]and how to disable some of them?
08:57mps`rc-update del $service` to disable
08:58m1n1m4[m]same interface than apk, that is nice
08:59mpsguide about working with services
08:59m1n1m4[m]ehe, i read the handbook but did not get there... Sorry
08:59m1n1m4[m]i mean... I did but forgot...
09:00mpsalpine is more like hackers distro and not for users who want 'install and set by clickety'
09:01mpsand my guides is extreme ones to minimalism
09:01m1n1m4[m]is there a way using apk to detect the dependencies of network-manager and list them so that i can test removing them?
09:02m1n1m4[m]but only those...
09:02mpsapk info -r network-manager-applet
09:02m1n1m4[m]mps: now that is PERFECT!
09:02mpsapk info -h will tell
09:03mpsbut apk will remove deps automatically if some dependant pkgs are not installed manually or pinned
09:04m1n1m4[m]mps: yes i agree on this Alpine philosophy, i am always upset with the bloated stuff
09:05m1n1m4[m]for example, i do not have a printer, and i always get cups, it is anoying...
09:05mpsm1n1m4[m]: you could probably get more exhaustive info on #alpine-linux IRC channel on OFTC
09:06mpsthere are a lot more people with alpine experience
09:07mpsbut I'm not there, because some people likes to babble to much
09:10m1n1m4[m]<mps> "m1n1m4!: you could probably..." <- yes yes good, i am at that room, good idea, but i think i have enough to solve this
09:16mpsm1n1m4[m]: did you installed on internal nvme with btrfs as root filesystem?
09:18m1n1m4[m]mps: yes, pretty simple, i followed your guide and formatted nvme linux partition with btrfs before the "install nvme" step i think.
09:21m1n1m4[m]<mps> "there are a lot more people with..." <- yes, i see, but in this case having M1 experience, as a beta user, i think here is better.
09:21m1n1m4[m]just one thing, because i have to reboot to comeback here, since matrix on phone is just to complex, so i try to take all the info at one time
09:22m1n1m4[m]so i will disable the network manager service then how do i get iwd back to work, because i cannot even see the device with iwctl
09:22mpsrc-update add iwd
09:22m1n1m4[m]on iwctl: device list, i get nothing
09:23mpscheck if dbus and iwd running
09:24mpsthere is gomuks matrix text mode client on alpine
09:24mpsthere is also element but I don't know how to use it
09:25mpsoh, and weechat irc client with matrix plugin could work
09:25m1n1m4[m]OK so rebooting to fix this already 2 and a half day adventure... I am happy with the result, because i am learning a lot, which is great.
09:26m1n1m4[m]mps: element is text mode also?
09:27mpsno, it is gui
09:27m1n1m4[m]mps: OK, thanks!
09:27m1n1m4[m]rebooting now!
09:47Catyre_ has quit [Remote host closed the connection]
09:48Catyre has joined #asahi-alt
10:27m1n1m4[m]OK so, great the command line interface of rc-update show
10:27m1n1m4[m]very simple and quick to understand
10:33m1n1m4[m]i disabled networking, hostname and chronyd ( because they are network related ) . Enabled iwd. rebooted but the thing is, i think modprobe for loading the brcmf ( wifi drivers ) is constantly echoing on the screen messages. The drivers it is using are a fallback to some generic raspberry thing. It should be associated with BCM4378/3 that i find on the nvme install.
10:34m1n1m4[m]so maybe i have to reverse the process ( unload the kernel module ) and reinstall the firmware.
10:34m1n1m4[m]came here to check how to unload the brcmf kernel module
10:35mpsrmmom brcmfmac
10:35mpsrmmod*
10:36mpshostname could be left in boot
10:36mpsit just sets hostname
10:37m1n1m4[m]since the wifi is not working i have to come here for internet and apk seems to need net too
10:37m1n1m4[m]anyway things are moving...
10:38j`eyyes apk downloads packages, so needs internet!
10:40mpsdid you installed firmware on nvme root FS
10:41m1n1m4[m]mps: i am using only USB
10:41m1n1m4[m]to have a separate visual env when i need it
10:41m1n1m4[m]just for writer and calc
10:42m1n1m4[m]just to inform that modprobe page on alpine wiki does not have info. https://wiki.alpinelinux.org/wiki/Modprobe
10:43mpsdid you installed firmware on usb disk
10:43m1n1m4[m]mps: i did that on the usb boot/
10:44m1n1m4[m]mps: yes i did, iwd was working before the install of the xfce4
10:44m1n1m4[m]all was cool
10:44mpsok, did you removed /etc/modprobe.d/blacklist-brcmfmac.conf
10:44m1n1m4[m]that is how i used apk to be able to install it
10:45mpsbrcmfmac modules shows some msgs on boot but this are irrelevant for work
10:47mpsm1n1m4[m]: could you check with rc-update is the dbus enabled
10:47mpsand iwd
10:47m1n1m4[m]mps: before installing setup-xorg-base, i followed your guide and all worked. I had the firmware installed on USB and iwd just started at boot with the correct wifi connection and i had internet right away.( I have an .img of that that i backed up before any changes )
10:48mpscould you paste 'rc-update' output
10:49mpsand does 'ip l' shows wlan0
10:49m1n1m4[m]Also the guide of installing the XFCE4 desktop worked, but then it replaced iwd with networking and this is the situation i am now trying to revert back to iwd.
10:50mpsyes, I don't have networking in rc-update list
10:50m1n1m4[m]mps: on iwctl ( device list ) is empty, i do not see wlan0. The driver somehow is not the correct one so it was lost whith the desktop install.
10:51mpsand 'ip l'
10:51m1n1m4[m]i will check after reboot
10:51mpsdoes it show wlan0
10:55m1n1m4[m]mps: i will check after reboot, but i am constantly having a message on the screen ( 2 lines ) something starting with brcmfmac failed to load driver and the second message also starting with brcmfmac says it loaded some fallback driver arduino or something, not the correct one i said above.
10:55mpshm, didn't had this problem
10:56m1n1m4[m]*BCM4378/3
10:56m1n1m4[m]and this BCM... is correctly loaded when i boot with this system on nvme, so the name comes from there
10:56m1n1m4[m]and i could see the difference
10:57m1n1m4[m]mps: i can make a video or something, i am making a USB install with mba 2020
10:58mpsno, BCM4378/3 is variant of brcmfmac driver, it is ok
10:58m1n1m4[m]yes, that is the correct one
10:58m1n1m4[m]but it loads a fallback driver
10:59m1n1m4[m]on the USB, it used to load that one BCM$#&*/#
10:59m1n1m4[m]sorry BCM4378/3
10:59m1n1m4[m]after the install of xfce and after reboot it lost it
11:00j`eyare you sure you didnt do anything else in the mean time?
11:01j`eyif you can get a picture/video of the actual messages that would help
11:01mpsm1n1m4[m]: lsmod | grep brcm
11:07m1n1m4[m]<j`ey> "if you can get a picture/video..." <- yes will try that, thanks
11:07m1n1m4[m]<mps> "m1n1m4!: lsmod | grep brcm" <- great and to disable it i will check this: Module Loading
11:07m1n1m4[m]'/etc/init.d/modules' loads all modules specified in '/etc/modules' and '/(etc|run|usr/lib|lib)/modules-load.d/*.conf'
11:08m1n1m4[m]<j`ey> "if you can get a picture/video..." <- i am totally sure that iwd was working well, then i installed xfce and, i think it replaced it by networking service and wpa_... and i lost internet
11:09m1n1m4[m]<mps> "m1n1m4!: lsmod | grep brcm" <- and what is the command to unload the module if i need to?
11:09mpsm1n1m4[m]: please, could you write messages without quote/reply in matrix
11:09m1n1m4[m]yes mps , sure
11:10mpsm1n1m4[m]: could you tell what `uname -a` shows
11:10m1n1m4[m]mps: yes i will once i reboot
11:11m1n1m4[m]if i need to unload a module what is the command? i was thinking of unloading brcf and reinstall the wifi driver then load it again
11:12mpsrmmod module_name
11:12m1n1m4[m]mps: PERFECT! brb!!!
11:12mpsbrcmfmac is driver
11:12mpsyou don't need to install anything
11:13m1n1m4[m]ok, thanks
11:13mpsit is included in kernel pkg
11:14mps(also I will become budhist monk :) )
11:15m1n1m4[m]yes but on your alpine install tutorial, after installing you do modprobe of it
11:15m1n1m4[m]mps: ahahahahahahaha good!
11:15j`eythats just a terminology issue, modprobe is loading a driver, not installing it
11:17mpsm1n1m4[m]: modprobe is needed only on first boot after installing wifi firmware
11:18mpsafter remove of /etc/modprobe.d/blacklist-brcmfmac.conf file on next reboots module will be loaded automatically
12:13m1n1m4[m]here i reply to your questions
12:14m1n1m4[m]<mps> "after remove of /etc/modprobe.d..." <- i checked this file, it was not there
12:14m1n1m4[m]sorry , @mps: i checked the blacklist file, it was not there
12:21mpsm1n1m4[m]: dmesg looks ok
12:22mpsit is same as in my case
12:22j`eythose fallback messages are ok, it's just looking for the right firmware
12:22j`eyhm actually "Falling back to sysfs fallbac" this looks wrong.. i think you dont have the firmware
12:22j`eym1n1m4[m]: check /lib/firmware/brcm
12:23j`eyhm weird, the good boot had that message too.
12:25m1n1m4[m]j`ey: i do! it is there and iwd was working before the install of xfce4... So how can he not find it?
12:26m1n1m4[m]mps: which dmesg looks good? the one that does not find the driver?
12:28m1n1m4[m]so i could not unload the brcm, i will now try the config files on /module-load.d/.cfg
12:29m1n1m4[m]the output of lsmod is supposed to not show all processes? is it possible to force it to show who is using the module?
12:29j`eyit doesnt show processes
12:29m1n1m4[m]i heard something about ptrace some time ago, could it work?
12:29j`eylsmod just shows the modules that are loaded into the kernel
12:30m1n1m4[m]but it shows a number
12:30m1n1m4[m]24 in the case of ipv6
12:30m1n1m4[m]i did ps -ef | grep 24
12:30m1n1m4[m]tried to kill it ( it is a root process ) kill -9 24 and i could not
12:31m1n1m4[m]ps -ef | grep 24 after and it still was there
12:31mpsm1n1m4[m]: this is number of other modules which uses it
12:31m1n1m4[m]another curious thing, is the kvm supposed to work by default after installing xfce?
12:32j`eykvm should work with or without xfce
12:32mpskvm is kernel driver, and it works
12:32m1n1m4[m]mps: yes but in the case of ipv6 it shows the number 24 but no module name
12:33j`eym1n1m4[m]: yes thats fine
12:33m1n1m4[m]j`ey: but is it needed if i do not use it? KVM, i mean
12:34j`eyno its not needed
12:35j`eybut theres probably no need to disable it
12:35m1n1m4[m]j`ey: perfect, then i will disable it because it could be blocking the brfcm
12:35m1n1m4[m]since it uses network resources
12:36m1n1m4[m]j`ey: OK thanks
12:36j`eyim not sure why you think that
12:36j`eybut if you really want: kvm-arm.mode=none on your kernel command line
12:37m1n1m4[m]j`ey: because i use kvm to remotely manage a VPN on a host
12:37j`eykvm is a virtual machine thing
12:37m1n1m4[m]and i use the browser. KVM is on the server
12:38mpsKVM, Keyboard Virtual?
12:38m1n1m4[m]j`ey: to see the boot process, when you restart, you need KVM. no?
12:38m1n1m4[m]Kernel Virtual Machine
12:38mpsKVM, Keyboard Virtual Monitor?
12:39j`eym1n1m4[m]: KVM is only used if you qemu or something like that
12:39m1n1m4[m]mps: Kernel Virtual Machine, it's on OVH and it is a direct console to the server remotely
12:39j`eythats got nothing to do with your m1 though
12:40m1n1m4[m]j`ey: i am only suggesting it might have hold on some handle of the network somehow not allowing me to unload the brmcf module
12:41j`eyit doesnt
12:41m1n1m4[m]j`ey: OK thanks
12:41m1n1m4[m]it was a wild guess :D
12:42m1n1m4[m]OK if all seems nice for you guys i will go check the modules *.config files
12:43m1n1m4[m]and comment out the brmcf thing :D
12:43mpsm1n1m4[m]: your dmesg shows that all ok with modules
12:43mpsyou should investigate processes state
12:44m1n1m4[m]mps: how do i do that?
12:44m1n1m4[m]syslog messages?
12:45m1n1m4[m]for which processes?
12:45m1n1m4[m]those that use brmcf?
12:47m1n1m4[m]i mean brcmfmac
12:47mpsps afx
12:48j`eym1n1m4[m]: can you double check the /lib/firmware directory on the usb stick?
12:48mpslook for iwd on output
12:48j`eymaybe it got corrupt or something?
12:48m1n1m4[m]great! i will do both
12:49mpshmm, I didn't carefully look at dmesg, sorry
12:50mpsas j`ey says looks like firmware is messed somehow
13:51m1n1m4[m]OK so, i tried to reinstall the drivers although they were at the same place, nothing changed
13:52mpsm1n1m4[m]: which drivers?
13:52mpsyou mean firmware?
13:53m1n1m4[m]mps: exactly, sorry. Then i compared the services from both systems
13:54m1n1m4[m]and what i can think could have changed this behavior was the change from libdev-zero to udev. Does it make any sense? is there a way i can test this deeper?
13:54mpshm, try this 'rm -rf /lib/firmware/brcm/' and then install firmware again
13:55mpsno, driver is loaded but can't find firmware, from your dmesg output
13:55m1n1m4[m]I mean setup-xorg-base conflicted with libdev-zero. i uninstalled it, re-run and the install continued nice
13:55m1n1m4[m]mps: i just did that
13:56m1n1m4[m]remember it stopped working out of the blue and i did not change it before...
13:56m1n1m4[m]iwd was working, i used it to get the xfce4 packages
13:56mpslibudev-zero is unrelated to this
13:56m1n1m4[m]but after reboot stopped working
13:57m1n1m4[m]mps: OK i will rm -rf /lib/firmwae/brcm then reboot
13:57m1n1m4[m]then i will reinstall it
13:57mpsdid you by chance installed some firmware by apk tool
13:58mpsaha, ok
13:58m1n1m4[m]mesa-dry-gallium ??
13:58mpsyou don't need to reboot after remove /lib/firmware/brcm
13:58m1n1m4[m]i installed the packages on the guide for xorg
13:59mpsyou can install firmware right after removing previous
13:59m1n1m4[m]well that i just did...
13:59m1n1m4[m]but i will redo
13:59mpsmesa-dri-gallium is unrelated
14:01m1n1m4[m]mps: OK, if that does not work i can reinstall all of it and record all the steps
14:01m1n1m4[m]it would be nice to have this working
14:01m1n1m4[m]thanks for your help
14:01mpsafter you install firmware use 'ls -l /lib/firmware/brcm' to look is it installed
14:02m1n1m4[m]i will ls it to a file before and after.
14:03j`eymaybe md5sum too
15:22m1n1m4[m]j`ey: md5sum of the firmware?
15:29j`eyit doesnt seem to be searching for brcmfmac4378b1-pcie.apple,shikoku.bin ..
15:29j`eym1n1m4[m]: in your firmware folder can you copy brcmfmac4378b1-pcie.apple,shikoku.bin to brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.bin
15:30m1n1m4[m]good idea!
15:31mpsyes, something is wrong with firmare
15:32mpsfirmware*
15:33j`eyok I dont think I see the sysfs in dmesg because I have CONFIG_FW_LOADER_USER_HELPER=n
15:34j`eyoh.. is this the issue where it takes a long time to boot because I just noticed that the time between the last 2 firmware messages was 61seconds
15:34j`eyso you might have to wait 10minutes or so, and then it may come up
15:40j`eymps: you didnt have any trouble with that option, im not sure why, but it looks like it might be the issue
15:57steevinteresting that it doesn't fall back to the more generic version
15:57j`eyit will.. in 10mins
15:58j`eyIve been meaning to rename my firmware to the most specific one, so it doesnt have those messages in dmesg :D
15:58j`eyand I cant get on the internet 0.00001s faster
16:04steevyeah, i need to do that with some of my other brcmfmac devices as well
16:11Catyre_ has joined #asahi-alt
16:16m1n1m4[m]j`ey: OK, on the brcm folder i found bins that i think are related to locations, they do not have specification of RASP or pcie. What i found was a txt maybe differentating them.
16:16j`eytry copy like I said
16:16j`eyor just left it boot for 10mins or so and see if it eventually loads
16:16m1n1m4[m]j`ey: it doesn work
16:17Catyre has quit [Ping timeout: 480 seconds]
16:17j`eywhich bit?
16:17m1n1m4[m]j`ey: the boot is quite fast, but as you see in the dmesg he keeps giving me the messages ( 2 at a time ) of failure
16:18j`eyyes but how long have you left it?
16:18m1n1m4[m]j`ey: in the folder there is no *RASP*.bin
16:18j`eyhave you let it sit for a while after booting
16:19m1n1m4[m]but before installing xfce it was immediate...
16:19m1n1m4[m]and i had internet right away
16:20j`eymaybe related to eudev actually, because thats how I think the sysfs callback stuff works
16:20m1n1m4[m]i have a USB bin file that i backed up before the change ( dd =
16:20j`eyeither let it sit for 10mins after boot, or try:
16:20m1n1m4[m]dd if=/dev/sda of=USB.backup.bin
16:20j`ey brcmfmac4378b1-pcie.apple,shikoku.bin to
16:20j`ey < j`ey> m1n1m4[m]: in your firmware folder can you copy
16:20j`ey brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.bin
16:20m1n1m4[m]the whole 7GB
16:23m1n1m4[m]j`ey: on the second report that i've sent you have a listing of the fw folder after reinstall. if you do:
16:23m1n1m4[m]cat report.2 | grep RASP
16:23m1n1m4[m]you do not get any binaries
16:23m1n1m4[m]only text files
16:24j`eyand I said:
16:24j`eycopy *brcmfmac4378b1-pcie.apple,shikoku.bin* to *brcmfmac4378b1-pcie.apple,shikoku-RASP-m-6.11-X3.bin*
16:24m1n1m4[m]ahahah thanks
16:28mpsj`ey: no, I didn't had this problem on all my tests
16:32j`eyand that might be related to eudev vs libudev-zero
16:33mpsit shouldn't be
16:34j`eywell udev is what deals with the sysfs firmware stuff, as far as I can tell
16:34mpsdriver and firmware should be loaded before udev starts
16:35mpsactually I have disk image with udev instead of libudev-zero, but it also worked
16:38dogdroid[m] has joined #asahi-alt
16:51m1n1m4[m]OK, the fw copy did work, in dmesg i have a new error
16:51m1n1m4[m]however iwctl does not show wlan0 on device list
16:52m1n1m4[m]i can make available an img of the /dev/sda
16:52mpsm1n1m4[m]: does 'ip l' shows it
16:53m1n1m4[m]to be reproducible, maybe
16:53m1n1m4[m]mps: will try that, brb
16:54j`eythat error is a flakey one, so just shows up at random "error at soc_component_read_no_lock on cs42l42.2-0048 for register: [0x00001101] -6"
16:55j`ey(should be fixed a later version of the kernel)
16:59m1n1m4[m]mps: it does not show
17:00m1n1m4[m]j`ey: great news that the error is known
17:01mpsm1n1m4[m]: I don't have idea why that happens
17:02m1n1m4[m]the usb key image has 5GB for root, so it might be possible to install some >magic tools< to debug the thing no?
17:03mpshm, I think I created it with 200MB size
17:03m1n1m4[m]yes, i extended it
17:03m1n1m4[m]to be able to allocate xfce, firefox, and calc and writer
17:03mpsyou can compress it with xz or zstd and upload somewhere?
17:04m1n1m4[m]i normally use 7z, just because i am used to
17:04mpsthat's ok
17:04m1n1m4[m]perfect i will compress it max compression
17:08m1n1m4[m]OK as soon as the dump from the usb is done ( 7GB ) i will compress and send a link to download via we transfer ( no email needed ). Is it OK?
17:10mpsuh I don't use wetransfer
17:13m1n1m4[m]no need install or login or anything just to click on the link and it downloads
17:13m1n1m4[m]on your behalf
17:13m1n1m4[m]it is like firefox send
17:14mpsyou don't have option to upload it on some web server
17:14m1n1m4[m]unfortunately not right now
17:14m1n1m4[m]well i can give you a tmp ssh login, yes
17:14mpshm, then don't do it with wetransfer (I'm against this service)
17:15m1n1m4[m]better like that?
17:15m1n1m4[m]on a server
17:15m1n1m4[m]mps: OK, ssh then.
17:16mpsbut you can easily install web server on that same server
17:16mpsinstead of ssh access
17:18m1n1m4[m]i can use password for the file if that is the problem with wetransfer or use any other service. The server itself is from a place i volunteer and ssh is already in place. I create a user and then delete it. I would not like to touch the config or change the software there. You understand?
17:25m1n1m4[m]OK i can upload it to proton drive and share a link from there, is it OK?
17:29m1n1m4[m]the file is 283MB
17:29m1n1m4[m]let me know if it is OK with you, will eat something now.
17:29m1n1m4[m]thank you all for the help
17:29m1n1m4[m]been "bughunting" for 3 days now, will go eat something.
17:45mps<<<i'm back
17:45mpshad to do something outside
17:45m1n1m4[m]no worries
…